Lejia Sun

Lejia Sun


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2024 in Renewable Energy
Verified
Journal Article
Closed access
LSLejia Sun
Lejia Sun
JJJingqi Jia
Jingqi Jia
QWQuanLi Wang
QuanLi Wang
YZYimeng Zhang
Yimeng Zhang

31 October 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YLYancong Liu
Yancong Liu
XTXiaoyan Tang
Xiaoyan Tang
HYHao Yuan
Hao Yuan
XWXuanjie Wang
Xuanjie Wang
YZYibo Zhang
Yibo Zhang
YZYuming Zhang
Yuming Zhang
In this letter, high-performance 4H-SiC junction barrier Schottky diodes with state-of-art single-pulse avalanche energy density by adopting recessed anode and termination regions structures have been demonstrated. With effective alleviation of avalanche current crowding effect at the boundary, near uniform distribution of avalanche breakdown was achieved. During the avalanche reliability evaluation in the inductive load circuits, crucial avalanche capability with EAS is up to 10.7 J/cm 2 . There are no parametric drift and device degradation after enduring more than 1 000, 000 repetitive clamping pulses were performed at EAS = 6.0 J/cm 2 , showing great potential for high-power and high-reliable power conversion.

31 May 2024 in Electronics
Verified
Journal Article
Open access
PDF file
JGJingkai Guo
Jingkai Guo
YCYahui Chen
Yahui Chen
YZYu Zhang
Yu Zhang
LSLejia Sun
Lejia Sun
YZYu Zhou
Yu Zhou
YZYuming Zhang
Yuming Zhang
Despite the extensively researched physical principles, numerous published simulations on SiC drift step recovery diodes (SiC DSRD) and the practical implementation of SiC DSRD-based pulses, there are few kinds of research focusing on collaborative design between a SiC DSRD and its driving circuit. In this paper, a collaborative design method of a SiC DSRD and its driving circuit are presented. In addition, a detailed simulation is conducted to verify design considerations and to analyze the impact of driving parameter changes on the output pulse waveform. A pulse generator prototype with a self-developed SiC DSRD is implemented. The experimental results show that the circuit can output a peak voltage of 790 V on a matching load of 50 Ω, with a rise time of 520 ps (20%~80%), and can work at a 1 MHz repetition frequency rate with good stability.

12 December 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JGJingkai Guo
Jingkai Guo
XTXiaoyan Tang
Xiaoyan Tang
YZYu Zhou
Yu Zhou
YZYibo Zhang
Yibo Zhang
ZZZhiwen Zhang
Zhiwen Zhang
QSQingwen Song
Qingwen Song
Drift step recovery diodes (DSRDs) are semiconductor opening switches that have been designed to generate high-voltage nanosecond pulses and exhibit the potential for high repetition frequency operation. In this article, a self-designed and fabricated SiC DSRD is employed to systematically investigate the charge loss behavior under different pump and extraction current conditions. Results show that the injected charge significantly influences the effective carrier lifetime, thereby having a pronounced impact on the charge loss ratio, while increasing the extraction current di/dt also reduces charge loss. The influence of pump current waveform on output characteristics and power loss was further analyzed. By comprehensively evaluating the pulse performance and power dissipation, an optimized pump waveform is proposed. With the optimized waveform, a pulse peak voltage ( ${\textit {V}} _{\text {peak}}$ ) of 1.45 kV with a very short rise time ( $\textit {t}_{\textit {r}}$ ) of 490ps is demonstrated and stable continuous over 60 million pulse output is achieved at a 1 MHz repetition frequency, with voltage fluctuations kept within 2%. This work provides practical guidance for the efficient design and operation of SiC DSRDs in high-frequency pulsed power systems.

6 March 2025 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
DGDengyao Guo
Dengyao Guo
XTXiaoyan Tang
Xiaoyan Tang
JGJingkai Guo
Jingkai Guo
YZYu Zhou
Yu Zhou
LSLejia Sun
Lejia Sun
QSQingwen Song
Qingwen Song
The drift step recovery diode (DSRD) is one of the most popular superfast pulse power switches. The pulse parameter model of DSRD is important to improve the characteristics of the pulsed power system and reduce the complexity of the DSRD design. This article presents models for the prepulse amplitude, pulse front durations, and pulse peak based on the operating mechanism of 4H-SiC DSRD. The models establish the connection between the output pulse parameters with the DSRD structure and the material parameters. 4H-SiC DSRDs with different structures are designed for experiments, and the experimental results are consistent with the model predictions. Using the quantitative description of the pulse parameters from the proposed models, the optimization methodology is discussed to reduce the pulse front durations under the prepulse amplitude and peak pulse fixed. The accuracy of this optimization method is confirmed through simulations. The models developed in this article simplify the complex problem of nonlinear interactions involved in 4H-SiC DSRD optimization, enabling better utilization of 4H-SiC DSRD’s advantages in pulsed power systems.

10 April 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
WYWenhao Yang
Wenhao Yang
YSYuyin Sun
Yuyin Sun
MQMengnan Qi
Mengnan Qi
ZTZhenyu Tang
Zhenyu Tang
SMShasha Mao
Shasha Mao
YZYuming Zhang
Yuming Zhang
Accurate models of 4H-SiC implanted resistors over a wide temperature range are necessary for using 4H-SiC materials in high-temperature integrated circuits. This study presents models of 4H-SiC nonuniform Gaussian implanted resistors. The resistance values of the N+ implanted resistor and the p-well implanted resistor exhibit a nonlinear behavior with temperature. Specifically, they decrease and then increase as the temperature rises from room temperature to 575 K. The N+ implanted resistor shows the lowest resistance at 475 K, while the p-well implanted resistor exhibits the lowest resistance at 425 K. Experimental results indicate that the p-well implanted resistor has a higher sheet resistance of approximately 45.7 $\text{k}\Omega ^{-2}$ , making it more suitable for accommodating large resistance loads in 4H-SiC integrated circuits. The N+ implanted resistor demonstrates a sheet resistance of approximately $178.7 \Omega ^{-2}$ . In addition, an artificial neural network (ANN) based on the Levenberg–Marquardt (LM) algorithm was used to perform SPICE modeling of nonuniform Gaussian implanted resistors. The local outlier factor (LOF) algorithm was employed to remove outliers in the test data, and the developed model had an average error of only 1.6%. The SPICE model developed for implanted resistors can be used to quickly and accurately design and simulate 4H-SiC integrated circuits.