Xuanhao Cao

Dr. Xuanhao Cao


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2024 in Buildings
Verified
Journal Article
Open access
PDF file
BLBo Liu
Bo Liu
XZXiaodong Zhao
Xiaodong Zhao
XLXing Liu
Xing Liu
HZHe Zhenqing
He Zhenqing
XCXuanhao Cao
Xuanhao Cao
BGBOWEN GUAN
BOWEN GUAN
In order to investigate the influence of igneous rock powder and silica fume on the performance of cement mortar, facilitate the application of igneous rock powder in engineering, and promote the greening of the cement industry, this study examined the pozzolanic activity of three different types of igneous rock powders: granite, andesite, and tuff. It explored the workability and mechanical properties of both binary systems (igneous rock–cement) and ternary systems (igneous rock–silica fume–cement). Microscopic techniques including X-ray diffraction (XRD), thermogravimetric analysis–differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), and nitrogen adsorption were used to investigate the mechanisms of how different types of igneous rock and silica fume affect the cementitious systems. The results showed that the pozzolanic activity of igneous rock powders was relatively weak, and their inclusion at levels below 20% had minimal impact on the flowability of cement mortar. In fact, within the 20% inclusion range, andesite powder even increased the flowability. Co-blending igneous rock powders with silica fume promoted the early hydration of cement, resulting in reduced calcium hydroxide (CH) content in the hydration products. The most significant increase in strength of the cement mortar system was observed when 5% to 10% (by mass) of igneous rock powder and 5% to 10% of silica fume were used as replacements for cement. The highest cement mortar strength was achieved when 10% andesite and 10% silica fume were used as replacements, resulting in a compressive strength of 52.2 MPa.

2 December 2024 in Buildings
Verified
Journal Article
Open access
PDF file
FWFulu Wei
Fulu Wei
HXHairong Xiao
Hairong Xiao
JZJia Zhang
Jia Zhang
HZHe Zhenqing
He Zhenqing
XCXuanhao Cao
Xuanhao Cao
BGBOWEN GUAN
BOWEN GUAN
To achieve the efficient utilization of magnesium slag, this study investigates the use of magnesium slag, fly ash, and metakaolin as partial substitutes for cement in cementitious materials. The reactivity of these materials is assessed based on the compressive strength of mortar. The response surface methodology is employed to explore the influence of material proportions on the strength performance of cement mortar. The mechanisms underlying strength development in the composite system are examined through XRD, SEM, TG-DTG, and BET analyses. Additionally, the effect of magnesium slag on the drying shrinkage properties of cement mortar is studied. The experimental results indicate that magnesium slag exhibits low reactivity and cannot be used alone as an active admixture. The optimal proportion of magnesium slag, fly ash, metakaolin, and cement is 10:10:10:70, achieving over 80% of the strength of pure cement mortar and approximately 1.5 times the strength of cement mortar containing 30% magnesium slag. Furthermore, magnesium slag helps mitigate the volume shrinkage caused by drying in cement mortar. Therefore, this study can facilitate the comprehensive utilization of magnesium slag in the construction sector, reducing its negative impact on the ecological environment.

8 August 2025 in Polymers
Verified
Journal Article
Open access
PDF file
GWGuotao Wei
Guotao Wei
ZWZhaoping Wang
Zhaoping Wang
XCXuanhao Cao
Xuanhao Cao
JWJiuran Wen
Jiuran Wen
The limitations imposed by the inherent complexity of multi-component composition ratios in biological polymer-stabilized soils have hindered rapid and accurate performance prediction. To enhance the predictive accuracy for biopolymer–fiber-stabilized soils, an optimized GA-driven backpropagation (BP) neural network was developed. Three key factors influencing mechanical strength (guar gum (GG), xanthan gum (XG), and polybutylene succinate (PBS)) were identified. The global optimization capability of GA was utilized to construct an integrated GA-BP model, with these factors serving as inputs and 7d compressive strength as the output. Support vector machine (SVM) was also incorporated to provide a benchmark comparison of predictive performance. Validation was performed using 80% of the dataset, with the remaining 20% used for testing. The optimal biopolymer dosage was found to be within the range of 0.5% to 1.0%, and the maximum 7d compressive strength achieved was 466.67 kPa at the 0.5% XG–0.5% GG combination, representing a 273% increase over untreated soil. The GA-BP model demonstrated superior performance in terms of prediction accuracy and stability, as indicated by an R2 of 0.887—significantly higher than those of the BP (0.714) and SVM (0.554) models. The mean squared error was substantially reduced to 1413, compared to 2130 and 3113 for BP and SVM, respectively. Although MAPE approached those of the GA-BP, the overall predictive efficacy of SVM was found to be inferior. A reliable and robust methodology for forecasting the mechanical behavior of stabilized soils has thus been provided by this model, supporting advanced applications within geotechnical engineering.

11 December 2024 in Polymers
Verified
Journal Article
Open access
PDF file
CXChunqiu Xia
Chunqiu Xia
XCXuanhao Cao
Xuanhao Cao
JWJiuran Wen
Jiuran Wen
JLJun Li
Jun Li
LDLi Dai
Li Dai
BGBOWEN GUAN
BOWEN GUAN
In order to investigate the mechanism of mechanical performance enhancement and the curing mechanisms of acrylate emulsion (AE) in cement and magnesium slag (MS) composite-stabilized soil (AE-C-M), this study has conducted a comprehensive analysis of the compressive strength and microstructural characteristics of AE-C-M stabilized soil. The results show that the addition of AE significantly improves the compressive strength of the stabilized soil. When the AE content is 0.4%, the cement content is 3%, and the magnesium slag content is 3% (AE4-C3M3), the strength of the formula reaches 4.21 MPa, which meets the requirements of heavy traffic load conditions in the construction of high-speed or main road base layers. Some reactive groups on the polymer side chains (-COOH) engage in bridging with Ca2+ and RCOO− to form a chemically bonded interpenetrating network structure, thereby enabling the acrylate emulsion to enhance the water damage resistance of the specimens. The notable improvement in strength is attributed to the film-forming and solidifying actions of AE, the binding and filling effects of C-S-H gel, and the reinforcing effect of straw fibers. FT-IR and TG-DSC analysis reveals the presence of polar electrostatic interactions between AE and the soil matrix. AE enhances the bonding among soil particles and facilitates the attachment of C-S-H gel onto the surfaces of the straw fibers, thereby increasing the strength and toughness of the material. The application of MS in conjunction with straw fibers within polymer-modified stabilized soil serves to promote the recycling of waste materials, thereby providing an environmentally friendly solution for the engineering application of solid waste.

1 September 2026 in Coatings
Verified
Journal Article
Open access
PDF file
XCXuanhao Cao
Xuanhao Cao
AXAnhua Xu
Anhua Xu
XZXin Zheng
Xin Zheng
YXYindong Xu
Yindong Xu
WGWeipeng Gai
Weipeng Gai
BGBOWEN GUAN
BOWEN GUAN
High Friction Surface Treatment (HFST) relies heavily on wear-resistant aggregates to ensure roadway safety, yet the conventional evaluation of aggregate abrasion resistance is time-consuming and resource-intensive. In this study, a machine learning framework was developed to predict the abrasion-induced angularity evolution of recycled high-alumina aggregates from their initial morphological characteristics, thereby enabling rapid abrasion-resistance screening. Six regression models were compared under leave-one-group-out cross-validation, and an improved whale optimization algorithm (IWOA) was proposed to tune the Gaussian process regression (GPR) model, incorporating five enhancements and a regularized fitness function to restrain overfitting. The models were trained on 42 samples from six aggregates, whose angularity, Form 2D, micro-texture, sphericity, and F:E ratio were measured with the AIMS II device before and after successive abrasion cycles. The IWOA-GPR model achieved the best performance, with an R2 of 0.8909, an RMSE of 150.98, an MAE of 120.55, and a MAPE of 4.60%. The SHAP analysis identified the abrasion revolutions, the initial Form 2D, and the initial angularity as the dominant contributors to the worn angularity. Moreover, the early angularity loss after the first 500 revolutions correlated strongly with the measured Los Angeles abrasion value (r = 0.935), which allows the LAA of a candidate aggregate to be estimated after a single abrasion cycle. The proposed framework therefore provides a rapid and reliable tool for screening wear-resistant aggregates for HFST applications and supports the clean utilization of recycled solid wastes in anti-skid pavements.