Li Dai

Dr. Li Dai


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 November 2016 in Plastics, Rubber and Composites: Macromolecular Engineering
Verified
Journal Article
Closed access
XHX. J. He
X. J. He
LDLi Dai
Li Dai
WYW. R. Yang
W. R. Yang
This paper reports an experimental study on the durability performance of glass fibre-reinforced polymer (GFRP) bars embedded in concrete beams with cracks. Accelerated tests were performed by immersing the beams in an alkaline solution at 60°C and in tap water at 23°C. Tensile tests were conducted to evaluate the residual tensile properties of the aged GFRP bars. Moreover, scanning electron microscopy, Fourier transform infra-red spectroscopy and differential scanning calorimetry were employed to observe and analyse potential deterioration of the fibres, matrix and fibre/matrix interface. The results showed that the tensile strength of the GFRP bars embedded in concrete beams decreased in all the different environments tested, and most of the tensile strength losses occurred during the initial stage. Actually, compared to the accelerated aging environment, the degradation of the tensile strength of GFRP bars embedded in concrete in the real-world environment is minor because the concrete, which has superior barrier properties, acts like a protective cover for the GFRP bar. Based on the test results, it can be concluded that a crack in concrete may increase the environment effect on the durability performance of the GFRP bar, but cannot change the mechanisms of mechanical degradation of the GFRP bar. In addition, the degradation rate of the GFRP bar was accelerated by sustained flexural loading. Consequently, it is important to restrain and alleviate the combined interaction of a harsh environment and sustained loading in practical engineering to enhance the durability of GFRP bars.

Verified
Journal Article
Open access
PDF file
LDLi Dai
Li Dai
MCMi-Da Cui
Mi-Da Cui
Xiao-Xiang ChengXiao-Xiang Cheng
Xiao-Xiang Cheng
To rigorously evaluate the health of a steel bridge subjected to vehicle-induced fatigue, both a detailed numerical model and effective fatigue analysis methods are needed. In this paper, the process for establishing the structural health monitoring (SHM)-oriented finite element (FE) model and assessing the vehicle-induced fatigue damage is presented for a large, specially shaped steel arch bridge. First, the bridge is meticulously modeled using multiple FEs to facilitate the exploration of the local structural behavior. Second, manual tuning and model updating are conducted according to the modal parameters measured at the bridge’s location. Since the numerical model comprises a large number of FEs, two surrogate-model-based methods are employed to update the model. Third, the established models are validated by using them to predict the structure’s mode shapes and the actual structural behavior for the case in which the whole bridge is subjected to static vehicle loads. Fourth, using the numerical model, a new fatigue analysis method based on the high-circle fatigue damage accumulation theory is employed to further analyze the vehicle-induced fatigue damage to the bridge. The results indicate that manual tuning and model updating are indispensable for SHM-oriented FE models with erroneous configurations, and one surrogate-model-based model updating method is effective. In addition, it is shown that the fatigue analysis method based on the high-circle fatigue damage accumulation theory is applicable to real-world engineering cases.

11 December 2024 in Polymers
Verified
Journal Article
Open access
PDF file
CXChunqiu Xia
Chunqiu Xia
XCXuanhao Cao
Xuanhao Cao
JWJiuran Wen
Jiuran Wen
JLJun Li
Jun Li
LDLi Dai
Li Dai
BGBOWEN GUAN
BOWEN GUAN
In order to investigate the mechanism of mechanical performance enhancement and the curing mechanisms of acrylate emulsion (AE) in cement and magnesium slag (MS) composite-stabilized soil (AE-C-M), this study has conducted a comprehensive analysis of the compressive strength and microstructural characteristics of AE-C-M stabilized soil. The results show that the addition of AE significantly improves the compressive strength of the stabilized soil. When the AE content is 0.4%, the cement content is 3%, and the magnesium slag content is 3% (AE4-C3M3), the strength of the formula reaches 4.21 MPa, which meets the requirements of heavy traffic load conditions in the construction of high-speed or main road base layers. Some reactive groups on the polymer side chains (-COOH) engage in bridging with Ca2+ and RCOO− to form a chemically bonded interpenetrating network structure, thereby enabling the acrylate emulsion to enhance the water damage resistance of the specimens. The notable improvement in strength is attributed to the film-forming and solidifying actions of AE, the binding and filling effects of C-S-H gel, and the reinforcing effect of straw fibers. FT-IR and TG-DSC analysis reveals the presence of polar electrostatic interactions between AE and the soil matrix. AE enhances the bonding among soil particles and facilitates the attachment of C-S-H gel onto the surfaces of the straw fibers, thereby increasing the strength and toughness of the material. The application of MS in conjunction with straw fibers within polymer-modified stabilized soil serves to promote the recycling of waste materials, thereby providing an environmentally friendly solution for the engineering application of solid waste.

21 August 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LDLi Dai
Li Dai
MCMi-Da Cui
Mi-Da Cui
ZZZe-Wen Zhu
Ze-Wen Zhu
YLYi Li
Yi Li
JQJiang-Rui Qiu
Jiang-Rui Qiu
Xiao-Xiang ChengXiao-Xiang Cheng
Xiao-Xiang Cheng
According to a previous study, a concrete bridge bearing vehicles traveling at lower speeds suffers from more severe apparent damage compared to one bearing vehicles traveling at higher speeds. The authors of the study subjectively inferred that the observed phenomenon is due to different vehicle load-holding durations for different vehicle speeds. However, this interpretation is not true for bridges with a smooth road surface. Based on an engineering case study of Renyihe Bridge (a concrete rigid-frame continuous highway bridge with spans of 80 m + 4 × 145 m + 80 m), this article reveals via numerical simulations that with the increase in road surface roughness, the resonant responses of the bridge are significantly amplified for cases of low vehicle speed, which can well explain the phenomenon observed by the aforementioned study. Field experiments undertaken on Renyihe Bridge further reveal the related mechanism. These experiments reveal that the frequency of the vehicle excitation for a bridge with sufficient road surface roughness might be closer to the low-order natural frequencies of a bridge with a decrease in vehicle speed. Therefore, the resonant responses are supposed to be more significantly amplified in cases of low vehicle speed after an increase in road surface roughness.

9 December 2016 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
LDLi Dai
Li Dai
XHXiongjun He
Xiongjun He
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry

15 September 2025 in Processes
Verified
Journal Article
Open access
PDF file
YZYouhua Zhang
Youhua Zhang
ZZZewen Zhu
Zewen Zhu
HZHuijie Zou
Huijie Zou
LDLi Dai
Li Dai
HLHuiting Liu
Huiting Liu
WHWei Han
Wei Han
The reaction tank of process wastewater, as one of the key pieces of equipment for wastewater treatment, is exposed to an acidic and alkaline wastewater immersion environment for a long time and is prone to the influence of complex ions in water, resulting in concrete shedding and steel bar corrosion, which seriously affect service performance. To address the issue of ionic erosion in process wastewater reaction tanks, a silicon–oxygen grid substrate was constructed with ethyl orthosilicate, and graphene oxide was used as the corrosion-resistant functional component to prepare GO/SiO2 corrosion-resistant films under acid-catalyzed conditions. Extreme corrosion environments were designed to evaluate the corrosion resistance of GO/SiO2 films. The results showed that the permeability of the uncoated samples decreased significantly, and the ion concentration leached in the corrosive medium was higher. The permeability of the GO/SiO2-coated samples did not decrease significantly, and the ion leaching concentration in the corrosive medium gradually decreased with the increase in GO content, verifying the positive correlation between GO content and corrosion resistance and GO’s use in the field of corrosion resistance in water treatment facilities.