The remaining useful life (RUL) prediction of wind turbine planetary gearboxes is crucial for the reliable operation of new energy power systems. However, the interpretability of the current RUL prediction models is not satisfactory. To this end, a multi-stage RUL prediction model is proposed in this work, with an interpretable metric-based feature selection algorithm. In the proposed model, the advantages of neural networks and long-range-dependent stochastic processes are combined. In the offline training stage, a general representation of the degradation trend is learned with the meta-long short-term memory neural network (meta-LSTM) model. The inevitable measurement error in the sensor reading is modelled by white Gaussian noise. During the online RUL prediction stage, fractional generalized Pareto motion (fGPm) with an adaptive diffusion is employed to model the stochasticity of the planetary gearbox degradation. In the case study, real planetary gearbox degradation data are used for the model validation.
3 October 2023 in Energy Exploration & Exploitation
Accurate prediction of photovoltaic (PV) power generation is the key to daily dispatch management and safe and stable grid operation. In order to improve the accuracy of the prediction, a finite iterative PV power prediction model with long range dependence (LRD) characteristics was developed using fractional Lévy stable motion (fLsm) and applied to a real dataset collected in the DKASC photovoltaic system in Alice Springs, Australia. The LRD prediction model considers the influence of current and past trends in the stochastic series on the future trends. Firstly, the calculation of the maximum steps prediction was introduced based on the maximum Lyapunov. The maximum prediction steps could provide the prediction steps for subsequent prediction models. Secondly, the order stochastic differential equation (FSDE) which describes the fLsm can be obtained. The parameters of the FSDE were estimated by using a novel characteristic function method. The PV power forecasting model with the LRD characteristics was obtained by discretization of FSDE. By comparing statistical performance indicators such as root max error, mean square error with Conv-LSTM, BiLSTM, and GA-LSTM models, the performance of the proposed fLsm model has been demonstrated. The proposed methods can provide better theoretical support for the stable and safe operation of PV grid connection. They have high reference value for grid dispatching department.
As modern power markets integrate more renewable generation, day-ahead energy clearing remains the central procurement step, while flexibility products are procured to ensure that the cleared energy schedule can be operated securely. This paper proposes a closed-loop framework linking the Power Exchange (PX) and the Independent System Operator (ISO) to bridge energy-market settlement and network-feasible operation. The PX performs staged day-ahead clearing with energy settled first, followed by aAutomatic generation control (AGC) and spinning reserve (SR) procured from the residual headroom of committed (energy-awarded) units. The ISO then validates the cleared schedule using an equivalent current injection (ECI)-based screening. This paper uses a single-period (single-hour) IEEE 30-bus case setting; multi-period scheduling and intertemporal constraints are not modeled. When congestion is detected, power-flow tracing identifies the main contributors and guides a minimal-change redispatch. The ISO-feasible dispatch is then sent back to the PX for re-clearing, aligning prices and welfare with an executable operating point. The resulting nonconvex clearing problems with valve-point effects and prohibited operating zones are solved by Artificial Protozoa Optimizer with Social Learning (APO–SL) and evaluated against representative metaheuristic baselines. IEEE 30-bus studies show that off-peak and average-load cases pass ISO screening directly, whereas the peak case tightens reserve headroom (SR capped at 39.08 MW) and triggers congestion. After ISO feedback and energy re-clearing, line loadings return within limits. The ISO-feasible dispatch changes the marginal accepted offer and lifts the MCP (3.73 → 4.38 $/MWh). The welfare value reported here follows the paper’s settlement-based definition (purchase total minus accepted offer cost), and it increases accordingly (113.77 → 190.17 $/h).
A novel wider field of view of concentrators, which is composed of an optical fisheye lens with wider field of view and a traditional compound parabolic concentrator (CPC), is proposed in this paper. In this novel concentrator, exits of rays of meniscus fisheye lens and entrances of rays of CPC is fitted tightly on the basis of principles of ray trace, so that the proposed concentrator can be used to concentrate higher optical power than traditional CPC. In this paper, based on the geometry construction model of the new wide-field concentrator is established, the optics simulation software of TracePro is employed to model and design the structure of the concentrator, and analyses of performances for the concentrator is also carried out. The results show that this new wide-field concentrator can significantly increase the light energy received by the concentrator compared with a conventional concentrator without a wide-field fisheye lens, and can significantly improve the performance of LED wireless optical communication systems if used in the receiving optical antenna of LED wireless optical communication systems.
Estimation of remaining useful life (RUL) of roller bearings is a prevalent problem for predictive maintenance in manufacturing. However, roller bearings are subject to a variety of factors during their operation. As a result, we deal with a slow nonlinear degradation process, which is long-range dependent, self-similar and has non-Gaussian characteristics. Proper data pre-processing enables us to use Pareto’s probability density function (PDF), Generalized Pareto motion (GPm) and its fractional-order extension (fGPm) as the degradation predictive model. Estimation of the Hurst exponent shows that this model has a long-range correlation and self-similarity. Through the analysis of the uncertainty of the end point of the bearing’s RUL and the prediction process, not only did it verify the high adaptability of fGPm in simulating complex degradation processes but also the criteria for judging self-similarity, and LRD characteristics were established. The case study mainly proves the validity of the theory, providing an effective analytical tool for a deeper understanding of the degradation mechanism.
The reliability analysis of integrated circuit (IC) isolation structures (ISs) faces two challenges: how to accurately describe the distribution of time-to-failure (TTF) data, and how to obtain the TTF distribution under actual working conditions (AWCs). To address these issues, this paper introduces the flexible five-parameter Beta Generalized Weibull (BGW) distribution, which can represent the five characteristic failure-rate shapes (IFR, DFR, CFR, BFR and UBT). The sign of the hazard derivative is analyzed through Glaser’s eta-function theorem together with the asymptotic behavior of the hazard rate at the origin and at infinity; this yields exact, necessary-and-sufficient parameter conditions for each shape, with the origin controlled by the product aγω and the tail controlled by γ. A TTF model based on the BGW distribution is then proposed to predict the TTF distribution under AWCs, and it is proved analytically that a change of stress affects only the scale parameter δ, leaving all shape parameters unchanged. Because this invariance was previously stated as an assumption, it is verified empirically on the time-dependent dielectric breakdown (TDDB) data using per-level Weibull shape estimates with bootstrap confidence intervals, a Kruskal–Wallis test on standardized failure times, and a parametric-bootstrap likelihood-ratio test within the BGW family; all three tests support stress-invariant shapes. The reliability function is recast as a convergent infinite series, with the correct beta-integral kernel and an explicit ratio-test bound. Finally, the effectiveness and superiority of the method are verified using TDDB TTF data, and the untested 3800 V condition is predicted from the fitted linear voltage-acceleration model.