Synthesis and characterization of iron oxide nanoparticles coated with a large molar weight dextran for environmental applications are reported. The first experiments involved the synthesis of iron oxide nanoparticles which were coated with dextran at different concentrations. The synthesis was performed by a co-precipitation technique, while the coating of iron oxide nanoparticles was carried out in solution. The obtained nanoparticles were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction spectrometry, Fourier transform infrared spectroscopy and superconducting quantum interference device magnetometry. The results demonstrated a successful coating of iron oxide nanoparticles with large molar weight dextran, of which agglomeration tendency depended on the amount of dextran in the coating solution. SEM and TEM observations have shown that the iron oxide nanoparticles are of about 7 nm in size.

In this study, lemon balm (Melissa officinalis L.) and dill (Anethum graveolens L.) essential oils (EOs) were encapsulated into collagen hydrolysates extracted from bovine tendons and rabbit skins, both mixed with chitosan (CS) by using the coaxial electrospinning technique for potential wound dressing applications. The morphology and chemical composition of the electrospun nanofibers were investigated using scanning electron microscopy (SEM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The antimicrobial activity of the dill EO and lemon EO, as well as the electrospun samples loaded with essential oils was determined by disk diffusion assay against Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Enterococcus faecalis ATCC 29212, and Salmonella typhimurium ATCC 14028 bacterial strains; Candida albicans ATCC 10231 and Candida glabrata ATCC 90028 yeast strains; and Aspergillus brasiliensis ATCC 9642 fungal strain. In vivo biocompatibility testing of the collagen hydrolysate-chitosan/essential oil electrospun nanofibers was based on the determination of the hematological, biochemical, and immunological profile and the evaluation of the influence produced on the oxidative stress in white Swiss mice. The synergetic effect of dill and lemon balm EOs can improve the antimicrobial activity of collagen hydrolysate-chitosan nanofibers against the most important bacterial strains. The in vivo test results suggested a good biocompatibility of electrospun samples based on collagen hydrolysate extracted from bovine tendons or rabbit skin mixed with chitosan and containing dill and/or lemon balm essential oils as encapsulated bioactive compounds.

New photocatalytic membranes based on polylactic acid (PLA)/TiO₂ hybrid nanofibers deposited on fiberglass supports were prepared and tested for the removal of ampicillin from aqueous solutions. The electrospinning technique was used to obtain hybrid nanofibers that were deposited on three types of fiberglass with different structures, resulting in three distinct photocatalytic membranes namely fiberglass fabric plain woven-type membrane, fiberglass mat-type membrane, and fiberglass fabric one-fold edge-type membrane. The results of the photocatalytic tests showed that the highest efficiency of ampicillin removal from aqueous solution is obtained with the fiberglass fabric plain woven-type membrane. Although it has been shown that the rate of photocatalytic degradation of ampicillin is high, being practically eliminated within the first 30 min of photocatalysis, the degree of mineralization of the aqueous solution is low even after two hours of photocatalysis due to the degradation of PLA from the photocatalytic membrane. The instability of PLA in the reactive environment of the photocatalytic reactor, evidenced by morphological, mineralogical and spectroscopic analyzes as well as by kinetic studies, is closely related to the structure of the fiberglass membrane used as a support for PLA/TiO₂ hybrid nanofibers.

The use of recycled polypropylene (RPP) as raw material for various industries has been known. However, the mechanical and thermal properties of recycled products are lower than those of raw material. The objective of this study was to obtain and investigate the modified recycled polypropylene (RPP) with commercial elastomers for possible applications. The compounded RPP-based thermoplastic elastomers were investigated in order to determine their thermal properties (melt flow index (MFI), differential scanning calorimetry (DSC), VICAT softening temperature (VST), and heat deflection temperature (HDT)), structural characteristics (optical microscopy, atomic force microscopy (AFM), and X-ray diffraction (XRD)), and mechanical properties (tensile properties, density, and IZOD impact). The RPP compounded with 10% elastomer recorded higher tensile properties than the unmodified RPP. Also, IZOD impact strength increased from4.3±0.2 kJ/m²(registered for RPP) to21.7±2.5 kJ/m²for the PPR/SIS30 compound, while the degree of crystallinity decreased for all compounds. The obtained results recommend the RPP/elastomers compounds both for environmental remediation from postconsumer PP wastes and to realize new goods with high performance for various applications.

The goal of the present paper is to explore the properties of medium molecular-weight chitosan/polyvinyl alcohol blends mixed in volume ratios of 75:25, 50:50, and 25:75 obtained by solution casting. Cross-linked chitosan/poly(vinyl alcohol) nanostructures were obtained by treating these blends with 5% (v/v) glutaraldehyde. The prepared chitosan/polyvinyl alcohol films were characterized by attenuated total reflectance – Fourier transform infrared spectroscopy (FT-IR), dynamic light scattering, and cytotoxicity, while the nanostructured materials were examined by scanning electron microscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X-ray diffraction. Also, the removal of lead(II) ions from aqueous solution by adsorbents nanostructures was studied in the batch adsorption mode. The effects of adsorbent dosages, initial metal concentration, and contact time on the adsorption capacity were investigated. The FT-IR spectra indicated the interactions of polyvinyl alcohol with chitosan. DSC and TGA analyses revealed the loss of water up to 100 °C. The zeta potential and mobility of the prepared nanostructures were enhanced with the increasing ratio of the cationic polymer. The results showed that the 100% chitosan adsorbent provided the highest removal of Pb(II) during the first 15 min (̴94%). The chitosan100/polyvinyl alcohol0 and chitosan75/polyvinyl alcohol25 nanostructures fitted well with the Langmuir isotherm model. The maximum adsorption capacities for Pb(II) ions reached maxima of 7.36 and 7.67 mg/g, respectively. The Freundlich isotherm model best described the Pb(II) adsorption on the 50% chitosan/50% polyvinyl alcohol and 25% chitosan/75% polyvinyl alcohol adsorbents. Furthermore, (3-(4,5-dimethylthiazol-2-yl)-2,5- diphenyltetrazolium bromide (MTT) assay results demonstrated that chitosan/polyvinyl alcohol films are biocompatible with more than 90% cell viability.

Bionanocomposites including poly(lactic acid) (PLA), collagen, and silver nanoparticles (AgNPs) were prepared as biocompatible and stable films. Thermal properties of the PLA-based bionanocomposites indicated an increase in the crystallinity of PLA plasticized due to a small quantity of AgNPs. The results on the stability study indicate the promising contribution of the AgNPs on the durability of PLA-based bionanocomposites. In vitro biocompatibility conducted on the mouse fibroblast cell line NCTC, clone 929, using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed high values of cell viability (>80%) after cell cultivation in the presence of bionanocomposite formulations for 48 h, while the percentages of lactate dehydrogenase (LDH) released in the culture medium were reduced (<15%), indicating no damages of the cell membranes. In addition, cell cycle analysis assessed by flow cytometry indicated that all tested bionanocomposites did not affect cell proliferation and maintained the normal growth rate of cells. The obtained results recommend the potential use of PLA-based bionanocomposites for biomedical coatings.