An innovative method of insulation by injection to a cooling tank was investigated with consideration of a sustainable development need during production of thermo-insulation materials. An insulation material consisted of polyurethane foam. The manufacturer has chosen HFO gases for filling in the pores, since this is a product with a low environmental impact. HFO gases have a zero potential for destruction of the ozone layer and an extremely low global warming potential. Cooling tanks insulated with modern technologies of injection of polyurethane foam were investigated with regard to heat permission. They were also tested on account of occurrence of heat leakage bridges. The investigation covered also cooling furniture insulated with a conventional method of gluing ready-made polyurethane boards. The tests showed that a modern insulation technology influences reduction of the heat permission coefficient towards the presently applied technology. The investigated insulation of cooling furniture did not prove any heat leakage bridges. Therefore, it may be concluded that the technological process is correct. Cooling tanks manufactured in the present insulation technology did not show the occurrence of heat leakage bridges.
The general development of technology and universal access means that gastronomy furnishings can be found in every corner of the world. Therefore, it is important to develop these devices and the machines that constitute them. We are talking about refrigeration systems located inside gastronomy furnishings. The R404A refrigerant, popular in recent years, is being withdrawn from use due to its harmful impact on the environment. Modern synthetic refrigerants or natural refrigerants can be used as alternative substances. In modern solutions, it is expected that devices and all cooperating elements have the lowest possible harmful impact on the environment and the user while, at the same time, having the highest possible energy efficiency. First, tests were carried out with the R404A refrigerant. Then, the working medium was replaced without changing any element of the refrigeration system with the modern R455A refrigerant. The system was tested in terms of the operating parameters achieved and in terms of electricity consumption. It was found that there is an alternative R455A refrigerant operating in the refrigeration system of catering furnishings, which provides the system with an average of 34% better energy efficiency than the reference refrigerant R404A. It was also found that the time needed to achieve the set working conditions decreased. An alternative refrigerant allows a refrigeration system to be built based on components available on the market or one that can be used as a direct replacement for the old refrigerant.
This paper presents the application of the multiple-criteria decision-making (SAW) method for selecting the optimum refrigerant for the refrigeration systems of commercial cooling equipment used in gastronomy furniture, which is paramount in storing food under optimal conditions. The analysis focused on comparing different refrigerants, including natural refrigerants such as R744 (carbon dioxide) and R290 (propane) and synthetic refrigerants such as R455A, R449A, and R452A. As a result of the analysis using the SAW method, the refrigerant R455A was found to be the best solution. This choice resulted from the consideration of various decision criteria, such as energy efficiency, environmental impact, operating costs, and technology availability. R455A stands out as a synthetic refrigerant that provides high energy efficiency with minimal environmental impact. Its use supports sustainability goals by reducing greenhouse gas emissions and electricity consumption, which is crucial given the modern regulatory requirements and environmental standards. This study offers a practical decision-making tool for commercial refrigeration equipment designers and manufacturers, supporting them while selecting the optimal technological solutions. The choice of refrigerant R455A addresses the need to integrate energy efficiency, environmental protection, and cost-effectiveness in the process of designing modern refrigeration systems for catering furniture.
Low-temperature contact freezing refrigeration solutions available on the market typically contain refrigerants inside the plates, which may result in harmful emissions into the atmosphere and the contamination of food products in case of failure. However, a concept for a refrigeration plant with new coolant—a solution of potassium formate—is introduced in this paper. It comprises two systems: the primary one, where the compressor system is cooling down the coolant in the evaporator (as a heat and mass exchanger), and the secondary one, where the pump system is responsible for coolant circulation. As a coolant in the intermediate system, a 48% aqueous solution of potassium formate was utilized due to its numerous benefits. This liquid is neutral to the pump circuit installation materials and does not pose a threat to the food product in case of leakage, as it is also used as a food preservative additive. The use of liquid coolant ensures that any malfunction results in a visible leak, allowing for prompt intervention, unlike refrigerants that escape unnoticed into the atmosphere. Moreover, a refrigerant with a lower GWP than traditional solutions was chosen, making the system more eco-friendly.