Waste management is still one of the leading global challenges in the 21st century. From the European Union’s point of view, the Waste Framework Directive obliges businesses and households to recycle at least 55% of their municipal waste by 2025 and to reach 65% in 2035. Hence there is a great need to seek new solutions for the reuse of various waste materials. One of the most widely used wastes is their utilization as fillers or reinforcements in the metal- or polymer-based composites. The reuse of wastes for the production of tribological materials gives not only environmental benefits related to the transformation of waste into raw materials but also may improve the mechanical and tribological properties of such materials. Moreover, the use of waste reduces the production costs resulting from the lower price of filler materials and longer service life of developed products. The purpose of the current review is, therefore, aimed at the evaluation of the reuse of agricultural, industrial and postconsumer wastes as reinforcements in the composites used for tribological applications. The tribological performance (wear rate, coefficient of friction) of both monolithic and hybrid composites reinforced with waste materials was a particular subject of interest in this review.
1 August 2019 in International Biodeterioration & Biodegradation
Flax is one of the most significant natural fiber providing plants. However, linseed oil originated from flax is also considered as health-promoting edible oil providing omega-3 fatty acids, mostly linolenic acid and tocopherols (including vitamin E). It is still unknown, how the moderate increase in temperature of machine press may influence the technological parameters of press and quality of the obtained oil. In this study, numerous variants of linseed oils pressed at different temperatures (from 50 to 90°C) from seeds of two varieties of Linum usitatissimum cultivars (i.e. brown-seeded and gold-seeded variety) were for the first time comprehensively investigated with respect to technological parameters of the pressing (press efficiency, throughput, power consumption), and quality of the obtained oils (acid value, peroxide value, oil color). The quality of the oils was assessed either for freshly pressed oils or oils stored at 5°C or 25°C for 30 days. The results suggest that higher press temperatures (80–90°C) might not be suitable for linseed oil quality (change of the oil color) and power consumption of the press. For other temperature ranges, no negative effects were observed for the quality of the oils, while technical parameters for these variants were maintained at similar level for both flax varieties.
Many organisations consider environmentally friendly activities, including the reduction of their carbon footprint, to be a significant aspect of their operation. In this study, a mathematical model was used to calculate the carbon footprint of food products at different stages of internal transport, using data on internal transport energy consumption. It was shown that for most products, the highest carbon footprint was related to the raw material transport stage from the loading/unloading point to the workstations on the production line. Broccoli showed the highest carbon footprint for internal transport per tonne of raw material. The study proposes methods of reducing the internal transport-related carbon footprint, which involves reorganising the distribution of goods in the warehouse and using nutritionally valuable vegetable waste in the production of food products.
Low-temperature contact freezing refrigeration solutions available on the market typically contain refrigerants inside the plates, which may result in harmful emissions into the atmosphere and the contamination of food products in case of failure. However, a concept for a refrigeration plant with new coolant—a solution of potassium formate—is introduced in this paper. It comprises two systems: the primary one, where the compressor system is cooling down the coolant in the evaporator (as a heat and mass exchanger), and the secondary one, where the pump system is responsible for coolant circulation. As a coolant in the intermediate system, a 48% aqueous solution of potassium formate was utilized due to its numerous benefits. This liquid is neutral to the pump circuit installation materials and does not pose a threat to the food product in case of leakage, as it is also used as a food preservative additive. The use of liquid coolant ensures that any malfunction results in a visible leak, allowing for prompt intervention, unlike refrigerants that escape unnoticed into the atmosphere. Moreover, a refrigerant with a lower GWP than traditional solutions was chosen, making the system more eco-friendly.