We present the characterization of a highly segmented “large area” hybrid pixel detector (Timepix3, 512 × 512 pixels, pixel pitch 55 µm) for application in space experiments. We demonstrate that the nominal power consumption of 6 W can be reduced by changing the settings of the Timepix3 analog front-end and reducing the matrix clock frequency (from the nominal 40 MHz to 5 MHz) to 2 W (in the best case). We then present a comprehensive study of the impact of these changes on the particle tracking performance, the energy resolution and time stamping precision by utilizing data measured at the Super-Proton-Synchrotron (SPS) at CERN and at the Danish Center for Particle Therapy (DCPT). While the impact of the slower sampling frequency on energy measurement can be mitigated by prolongation of the falling edge of the analog signal, we find a reduction of the time resolution from 1.8 ns (in standard settings) to 5.6 ns (in analog low-power), which is further reduced utilizing a lower sampling clock (e.g., 5 MHz, in digital low-power operation) to 73.5 ns. We have studied the temperature dependence of the energy measurement for ambient temperatures between −20 °C and 50 °C separately for the different settings.
This paper presents a modular readout and chipboard concept developed for the Timepix4 hybrid pixel detector, a high-performance ASIC featuring 448 × 512 pixels and sub-nanosecond timing resolution. Building on the success of Timepix3, Timepix4 supports both frame-based and data-driven acquisition modes with data rates up to 3.6 MHits/mm2/s and 195 ps time binning. The chip can be integrated via wire-bonding or Through-Silicon-Via (TSV) technology, allowing full four-side tiling for scalable detector arrays. The modular chipboard system, consisting of a detector module and a baseboard, simplifies power delivery and data transmission using a single 12 V supply and Ethernet-style cabling. A commercial FPGA-based readout supports up to four detectors with Gigabit Ethernet and PCIe interfaces. The concept was successfully validated at CERN SPS with heavy-ion beams, demonstrating system stability and high data integrity. Ongoing development focuses on enhanced power and cooling systems, multi-chip integration, and improved software support for advanced experimental setups.
This work presents a novel readout system for the Timepix3-based detector, designed specifically for large-scale facilities, such as particle accelerators. The authors begin by outlining the challenges associated with utilizing the Timepix3 detector over long distances. This paper proposes a solution to these challenges and describes its practical implementation. Beam test results are provided to demonstrate the system’s performance, with a particular focus on time-of-flight measurements. Additionally, the authors address the complexities of operating in challenging environments, particularly those involving radiation and magnetic fields.
This paper presents Katherine Generation 2 (Gen2), an advanced readout system designed for Timepix3 pixel detector. The new system addresses limitations of the original Katherine (Gen1) design, particularly in terms of data throughput and support for multi-detector configurations. Katherine Gen2 supports two sensor inputs via VHDCI connectors and provides two independent bias voltage sources up to ±1 kV. It includes both Gigabit Ethernet and USB 3.0 interfaces, offering flexibility for remote or local high-throughput applications. Data handling pipeline has been extended to support dynamic detector mapping, hardware decoding of pixel data, and timestamping of external triggers. Compatibility with multiple chipboard types, including single-chip, quad (2× 2), and specialized detector units, is maintained. Benchmark measurements demonstrate that the system achieves the maximum data rate supported by the Timepix3 chip in USB 3.0 mode. The device is supported by established software tools and is intended as a flexible platform for various experimental and detector development applications.
This paper presents a modular and configurable software architecture for the Katherine family of readouts used with the Timepix detectors. The new architecture introduces a flexible component model in which hardware-specific implementations can be dynamically selected at runtime through configuration files. The architecture also supports custom on-board processing plugins, implemented either as shared libraries or via inter-process communication. A C++ library was created to support and simplify plugin development. The architecture was implemented and tested on Katherine Gen2 (based on Cyclone V FPGA) with a Timepix3 detector, and on Katherine for Timepix4 (based on Arria 10 FPGA) with a Timepix4 detector. Plugin functionality was demonstrated on a shared library plugin that performs noise filtering and accumulates received pixel hits. This plugin also implements a custom communication channel to transfer the output to a host system that is independent of the control application. Future work will focus on extending the plugin framework and providing ready-to-use processing modules for end users.
Neutron capture reactions provide essential nuclear physics input for modeling the synthesis of heavy elements in stars. The growing precision of stellar spectroscopy and isotopic measurements in presolar SiC grains now demands cross sections with improved accuracy over the full energy range, and access to unstable nuclei relevant to slow (s-) process branchings and the intermediate (i-) process. This article reviews recent progress in direct neutron capture measurements, focusing on time-of-flight (TOF) experiments at CERN n_TOF and complementary activation techniques. Substantial advances have been achieved for stable s-only and bottleneck isotopes, significantly improving constraints on s-process models. In parallel, the combination of high instantaneous neutron fluxes and advanced detector systems has facilitated first-time neutron capture measurements on several radioactive branching-point nuclei. Feasibility studies, however, reveal current limitations related to sample availability, background conditions, and restricted energy coverage. In this context, the complementarity between TOF and activation emerges as a central strategy. Future developments, including high-flux facilities and novel inverse kinematics experiments in ion storage rings, are expected to extend the boundaries of neutron capture measurements, overcoming current limitations and helping unlock new frontiers in our understanding of stellar nucleosynthesis.