Our world is facing an environmental crisis that is driving scientists to research green and smart solutions in terms of the use of renewable energy sources and low polluting technologies. In this framework, photovoltaic (PV) technology is one of the most worthy of interest. Dye-sensitized solar cells (DSSCs) are innovative PV devices known for their encouraging features of low cost and easy fabrication, good response to diffuse light and colour tunability. All these features make DSSCs technology suitable for being applied to the so-called agrovoltaic field, taking into account their dual role of filtering light and supporting energy needs. In this project, we used 40 DSSC Z-series connected modules with the aim of combining the devices’ high conversion efficiency, transparency and robustness in order to test them in a greenhouse. A maximum conversion efficiency of 3.9% on a 221 cm² active area was achieved with a transparency in the module’s aperture (312.9 cm²) area of 35%. Moreover, different modules were stressed at two different temperature conditions, 60 °C and 85 °C, and under light soaking at the maximum power point, showing a strong and robust stability for 1000 h. We assembled the fabricated modules to form ten panels to filter the light from the roof of the greenhouse. We carried out panel measurements in outdoor and greenhouse environments in both sunny and cloudy conditions to find clear trends in efficiency behaviour. A maximum panel efficiency in outdoor conditions of 3.83% was obtained in clear and sunny sky conditions.

In the framework of regenerative circular economy and Sustainable Development Goals #6, water demand and wastewater production are a crucial environmental issue. To cope with this, a system called Zero Mile has been conceived to reuse/upcycle the dishwasher wastewater in both fertilisation of a vertical garden (for home plant production at zero mile) and the subsequent dishwasher rinsing cycle. The core of the Zero Mile system is a biofilter constituted by an ad hoc engineered microbial consortium, based on the mutualistic relationship between autotrophic and heterotrophic microbial partners, that makes the biodegradative process sustainable over time. Two semi-batch tests were performed to evaluate the capability and the efficiency of the microbial consortium to operate in conditions mimicking the Zero Mile system: consortia were challenged in two dishwasher wastewater volumes (50 and 500 mL), with a replenishing rate of 4 days for ¼ of the dishwasher wastewater volume. The results of these tests showed that the consortium thrives well in dishwasher wastewater over time and can survive with the volume and rates of replenishments. Next Generation Sequencing showed that the microbial consortium maintains a stable taxonomic composition, and chemical analyses demonstrated a very high bioremediation efficiency (total nitrogen and phosphorus removal). Aiming to contribute to the circular economy approach, the consortium ‘treated’ dishwasher wastewater was useful for plant fertilisation, as demonstrated by pigment content and quality indices (total phenols and flavonoids, soluble solids) measured in the lettuce plants grown in the Zero Mile demonstrator and watered with consortium reclaimed dishwasher wastewater.

Increasing levels of freshwater contaminants, mainly due to anthropogenic activities, have resulted in a great deal of interest in finding new eco-friendly, cost-effective and efficient methods for remediating polluted waters. The aim of this work was to assess the feasibility of using a green microalga Desmodesmus sp., a cyanobacterium Nostoc sp. and a hemicryptophyte Ampelodesmos mauritanicus to bioremediate a water polluted with an excess of nutrients (nitrogen and phosphorus) and heavy metals (copper and nickel). We immediately determined that Nostoc sp. was sensitive to metal toxicity, and thus Desmodesmus sp. was chosen for sequential tests with A. mauritanicus. First, A. mauritanicus plants were grown in the ‘polluted’ culture medium for seven days and were, then, substituted by Desmodesmus sp. for a further seven days (14 days in total). Heavy metals were shown to negatively affect both the growth rates and nutrient removal capacity. The sequential approach resulted in high metal removal rates in the single metal solutions up to 74% for Cu and 85% for Ni, while, in the bi-metal solutions, the removal rates were lower and showed a bias for Cu uptake. Single species controls showed better outcomes; however, further studies are necessary to investigate the behavior of new species.

Aquaponics represents an alternative to traditional soil cultivation. To solve the problem of nutrient depletion that occurs in this biotechnological system, the application of a spirulina-based biofertilizer was assessed. The microalgal waste used in this study came from industrial processing. Four different dilutions of the supernatant portion of this waste were sprayed on lettuce plants cultivated in an aquaponics system installed at the Botanical Gardens of the Tor Vergata University of Rome. The biofertilizer was characterized to evaluate its amount of macro- and micronutrients. The analysis conducted on the plants involved both morpho-biometric aspects and qualitative–quantitative measurements. The experiments showed that the spirulina extract had a positive effect on the growth and nutraceutical content of the lettuce plants; the obtained results highlighted that a dilution of 75% was the best for treatment. The use of the proposed organic and recycled fertilizer could increase the sustainability of crop cultivation and promote the functioning of aquaponics systems.

Aquaponics is an innovative agricultural method combining aquaculture and hydroponics. However, this balance can lead to the gradual depletion of essential micronutrients, particularly iron. Over time, decreasing iron levels can negatively impact plant health and productivity, making the monitoring and management of iron in aquaponic systems vital. This study investigates the use of Fe-Alg-CaCO₃ microparticles (MPs) as foliar fertilizer on lettuce plants in an aquaponic system. The research investigated Lactuca sativa L. cv. Foglia di Quercia Verde plants as the experimental cultivar. Three iron concentrations (10, 50, and 250 ppm) were tested, with 15 plants per treatment group, plus a control group receiving only sterile double-distilled water. The Fe-Alg-CaCO₃ MPs and ultrapure water were applied directly to the leaves using a specialized nebulizer. Foliar nebulization was chosen for its precision and minimal resource use, aligning with the sustainability goals of aquaponic cultivation. The research evaluated rosette diameter, root length, fresh weight, soluble solids concentration, levels of photosynthetic pigments, and phenolic and flavonoid content. The 250 ppm treatment produced the most notable enhancements in both biomass yield and quality, highlighting the potential of precision fertilizers to boost sustainability and efficiency in aquaponic systems. In fact, the most significant increases involved biomass production, particularly in the edible portions, along with photosynthetic pigment levels. Additionally, the analysis of secondary metabolite content, such as phenols and flavonoids, revealed no reduction compared to the control group, meaning that the proposed fertilizer did not negatively impact the biosynthetic pathways of these bioactive compounds. This study opens new possibilities in aquaponics cultivation, highlighting the potential of precision fertilizers to enhance sustainability and productivity in soilless agriculture.