A hybrid girder bridge adopts a steel segment at the mid-span of the main span of a continuous concrete girder bridge. The critical point of the hybrid solution is the transition zone, connecting the steel and concrete segments of the beam. Although many girder tests revealing the structural behavior of hybrid girders have been conducted by previous studies, few specimens took the full section of a steel–concrete joint due to the large size of prototype hybrid bridges. In this study, a static load test on a composite segment to bridge the joint between the concrete and steel parts of a hybrid bridge with full section was conducted. A finite element model replicating the tested specimen results was established through Abaqus, while parametric studies were also conducted. The test and numerical results revealed that the concrete filling in the composite solution prevented the steel flange from extensive buckling, which significantly improved the load-carrying capacity of the steel–concrete joint. Meanwhile, strengthening the interaction between the steel and concrete helps to prevent the interlayer slip and simultaneously contributes to a higher flexural stiffness. These results are an important basis for establishing a rational design scheme for the steel–concrete joint of hybrid girder bridges.
Debris poses multifaceted risks and jeopardizes various aspects of the environment, human health, safety, and infrastructure. The debris trajectory in turbulent wind flow is more dispersed due to the inherent randomness of the turbulent winds. This paper investigates the three-dimensional trajectories of plate-type wind-borne debris in turbulent wind fields via the method of numerical simulation. A 3D probabilistic trajectory model of plate-type wind-borne debris is developed. The debris trajectories are numerically calculated by solving the governing equation of debris motion and by introducing turbulent wind flows based on the near-ground wind field measured in the wind tunnel to account for the probability characteristics of the debris trajectory. The dimensionless velocities and displacements of the debris trajectory show good agreement with the experimental data in wind tunnel tests, confirming the rationality of the probabilistic trajectory model. Based on the validated trajectory model, the probability characteristics of the debris impact position, impact velocity, and kinetic energy, debris angular displacement, and angular velocity are analyzed in detail under five different wind attack angles. The proposed probabilistic model of plate-type debris in turbulent wind flow provides an accurate and effective method for predicting debris trajectory in three-dimensional space.
Unmanned Aerial Vehicle (UAV)-based photogrammetric reconstruction is a key step in geometric digital twinning of bridges, but ensuring the quality of the reconstruction data through the planning of measurement configurations is not straightforward. This research investigates an approach for quantitatively evaluating the impact of different methodologies and configurations of UAV-based image collection on the quality of the collected images and 3D reconstruction data in the bridge inspection context. For an industry-grade UAV and a consumer-grade UAV, paths for image collection from different Ground Sampling Distance (GSD) and image overlap ratios are considered, followed by the 3D reconstruction with different algorithm configurations. Then, an approach for evaluating these data collection methodologies and configurations is discussed, focusing on trajectory accuracy, point-cloud reconstruction quality, and accuracy of geometric measurements relevant to inspection tasks. Through a case study on short-span road bridges, errors in different steps of the photogrammetric 3D reconstruction workflow are characterized. The results indicate that, for the global dimensional measurements, the consumer-grade UAV works comparably to the industry-grade UAV with different GSDs. In contrast, the local measurement accuracy changes significantly depending on the selected hardware and path-planning parameters. This research provides practical insights into controlling 3D reconstruction data quality in the context of bridge inspection and geometric digital twinning.
Real-time perception of bearing rotation angles is essential for structural health assessment of bridges. However, existing vision-based rotation angle measurement methods exhibit limited robustness to time-varying operational conditions and tracking errors, particularly in practical applications of bridge monitoring. To address this limitation, this study presents an advanced computer vision-based monitoring technology for bridge bearing rotation angles by incorporating specifically configured retroreflective targets, an efficient target tracking approach, and a rotation angle calculation algorithm. Firstly, under LED illumination, retroreflective targets appear as bright, high-contrast features in the images, facilitating precise detection and tracking. Secondly, target centroids are tracked with sub-pixel accuracy through thresholding, edge extraction, and ellipse fitting. Lastly, the bearing rotation angle is calculated by analyzing the angle between the two characteristic lines formed by the target centroids. To validate the effectiveness of the proposed method, comprehensive numerical investigations were conducted, and the results showed that the proposed method maintained high accuracy across various imaging conditions. Additionally, comparative analysis with an existing advanced method also revealed that the proposed method exhibits superior measurement performance even under target tracking uncertainties. To investigate its feasibility and validate its practical effectiveness, a field application on an 80 m + 80 m continuous beam was conducted, and minute rotation angle measurements during 23 railway train drive-by events were obtained using the proposed method, yielding a root mean square error of 0.0008° and mean absolute error of 0.0007°. The successful development and field deployment demonstrate significant potential for advancing structural health monitoring technologies, contributing to intelligent infrastructure management through automated monitoring and early warning capabilities.
RGB–IR multimodal inspection can combine visible surface information with thermal-response patterns for building-defect assessment, but joint learning may develop class-specific information unevenly across modality branches. This study proposes adaptive class-conditional modality regulation for RGB–IR façade-defect semantic segmentation. Matched unimodal models establish an empirical diagnostic reference for each modality–defect pair. During multimodal training, periodic diagnostic branch scores are compared with these references, and the resulting diagnostic gaps redistribute auxiliary supervision while leaving the fused inference pathway unchanged. On the held-out test subset of the Building Façade Defect Detection dataset, plain dual-branch fusion provided only a modest improvement over RGB alone, while calibration-set diagnostics showed larger gaps in the IR branch. Across five matched test runs, the proposed method increased mIoU from to and Boundary F1 from to , exceeding early fusion and the selected global balancing methods OGM-GE and AGM. Ablation results associate the largest component-wise difference with class-specific allocation. The method adds training-time computation but does not change the deployed network or its forward computation.