The wheel–rail contact is an intrinsic characteristic of rail transport. This contact is one of the main reasons why rails are so efficient for transportation, mainly due to the very low friction coefficient between them and the wheels. However, this strong argument also leads to a disadvantage: the wheel contact is also associated with excessive vibration and noise, which have a strong impact on the passengers’ comfort and especially the surrounding community. These noises and vibrations impact the public in several ways, like disturbing sleep, increasing stress and heart-associated diseases. The main objective of the present work is to investigate the rail vibration attenuation by applying particle dampers. Four different particles will be studied, and their effectiveness in reducing the rail vibrations will be analysed. Promising results were found, where under certain conditions, the particle dampers, such as lead and magnetite particles, were able to reduce peak vibration levels by more than an order of magnitude. The application of this system may have a strong impact on the communities using and in the vicinity of rail systems by reducing the noise and vibration, consequently improving people’s health and well-being.
Performing fatigue characterisation is often an expensive task, being both time consuming and expensive. Taking that into account, ultrasonic fatigue testing is an interesting solution, since it can be thousands of times faster than traditional experiments. In ultrasonic fatigue testing, excitation frequencies are in the order of magnitude of 20 kHz, while common fatigue testing frequencies are typically approximately a few hundreds of Hz. Although promising, ultrasonic fatigue testing has some challenges, like high strain rates, heat generation and complex specimen design. Regarding the latter, since the working principle of ultrasonic fatigue tests relies on exciting the specimen in one of its natural frequencies, finding a specimen geometry to resonate at this given frequency might be challenging. Additionally, some materials often present challenges associated with high temperature during tests. The goal of this paper is to provide guidelines for specimen design, encompassing the effects of critical factors and their impact on important test parameters, like temperature and dimensions. The proposed methodology developed a parameter able to quantify the heat generation severity during ultrasonic fatigue testing for several materials based on their physical properties. Moreover, the effects of the geometry and material properties in the temperature during loading cycles, with special focus on thermal gradients were enumerated.
30 September 2017 in Mechanisms and Machine Science