The wheel–rail contact is an intrinsic characteristic of rail transport. This contact is one of the main reasons why rails are so efficient for transportation, mainly due to the very low friction coefficient between them and the wheels. However, this strong argument also leads to a disadvantage: the wheel contact is also associated with excessive vibration and noise, which have a strong impact on the passengers’ comfort and especially the surrounding community. These noises and vibrations impact the public in several ways, like disturbing sleep, increasing stress and heart-associated diseases. The main objective of the present work is to investigate the rail vibration attenuation by applying particle dampers. Four different particles will be studied, and their effectiveness in reducing the rail vibrations will be analysed. Promising results were found, where under certain conditions, the particle dampers, such as lead and magnetite particles, were able to reduce peak vibration levels by more than an order of magnitude. The application of this system may have a strong impact on the communities using and in the vicinity of rail systems by reducing the noise and vibration, consequently improving people’s health and well-being.
30 September 2017 in Mechanisms and Machine Science
Railway wheel defects are a major source of noise and vibration and may compromise operational safety if not detected at an early stage. Although numerous condition monitoring techniques have been proposed, validation under real operating conditions remains limited because of the scarcity of datasets with independently known defect locations and characteristics. This study presents an in-situ investigation of wheel defect detection using sound pressure measurements acquired during the passage of a full-scale train equipped with both reference wheels and wheels containing pre-identified defects. Experimental campaigns were conducted across 12 distinct test conditions at train speeds ranging from 10 to 60 km/h in both travel directions to evaluate the influence of operating conditions on the acoustic response. The acquired signals were analysed in the time and frequency domains. Defects were identified by combining the local sound pressure amplitude levels with temporal fluctuation indices derived from moving standard deviation. This approach enhanced transient acoustic signatures and facilitated the localisation of wheel defect-related events. The results demonstrate that the proposed Energy-Variance Product methodology successfully isolates defect-related transient acoustic features across all tested speeds, effectively suppressing continuous background locomotive noise and providing reliable diagnostic data, while the unique experimental configuration provides reliable data for validating acoustic monitoring methods under real railway operating conditions. These findings support the use of sound pressure measurements as a practical tool for railway condition monitoring and establish a valuable experimental benchmark for future diagnostic methods.