This study conducted an in-depth examination of the delamination process of multi-layer packaging waste (MLPW) recycling, intending to find an effective solution for recycling MLPW. The recycling process for such materials can be challenging due to the complexity of separating the different layers and components. However, this study proposed using nitric acid to facilitate delamination and recover the polymers from multilayer food packaging—the research aimed to investigate the mechanical properties of the polymers obtained through this recycling method. Our study on polymer materials exposed to chemicals revealed differences in fracture and tensile strengths among three polymers, P1, P2, and P3. P1 showed fluctuating fracture strengths between 5.11 MPa and 3.55 MPa, while P2 maintained a consistent but lower value of around 0.09 MPa. P3 exhibited a wider range from 3.19 MPa to 1.79 MPa. Tensile strength analysis showed P1 averaging 4.99 MPa and P3 3.17 MPa, with P2’s data inconclusive due to its softness. Understanding the mechanical characteristics of recycled polymers is crucial to determine their potential use in different industries, including packaging, construction, or manufacturing, thereby promoting a more environmentally friendly approach to MLPW management.

As photovoltaic (PV) installations expand globally, effective recycling of end-of-life crystalline silicon solar cells has become increasingly important, including the recovery of valuable metals such as silver (Ag) and aluminium (Al). Traditional nitric acid-based chemical leaching methods, although effective, present environmental challenges due to the generation of hazardous nitrogen oxide (NO_x) emissions. To address these concerns, this study investigated alternative hydrometallurgical leaching strategies. Two selective treatments (NaOH for Al, and NH₃ + H₂O₂ for Ag) and one simultaneous treatment (HNO₃ + H₂O₂) were evaluated for metal recovery efficiency. All methods demonstrated high recovery efficiencies, achieving at least 99% for both metals within 60 min. The investigated methods effectively suppressed NO_x emissions without compromising leaching efficiency. These findings confirm that hydrometallurgical leaching techniques incorporating hydrogen peroxide can achieve efficient and environmentally safer recovery of silver and aluminium from solar cells, providing valuable insights into the development of more sustainable recycling practices for photovoltaic waste management.

In order to implement timely sustainability solutions, road transportation is gradually transitioning to electric power. However, the maritime sector faces challenges in finding ways to shift towards more sustainable fuel. From the perspective of long-distance shipping, electric transport is economically impractical. Therefore, alternative solutions or proposals contributing to the global reduction of pollutant gas emissions in maritime transport are vitally important. This investigation aims to find solutions that enhance the ecological efficiency of intercontinental cargo ships. In this study, an assessment of a magnesium hydride coating was conducted as it is a prospective coating capable of reducing hydrodynamic resistance to save fuel. Due to MgH₂’s ability to release hydrogen at higher temperatures or during a reaction with water, it is expected that this could contribute to an enhancement of the Leidenfrost effect, maintaining a vapor layer on the surface. Samples prepared in situ via reactive magnetron sputtering were submitted to thermal analysis for dehydrogenation range evaluation and the experimental rig for critical (Leidenfrost) temperature identification. In conclusion, thermogravimetric (TG) analysis indicated that the volatile content, primarily hydrogen, in the sample reached approximately 13% by mass. The TG curve exhibited variations in MgH₂ mass, with the most significant mass loss occurring at 300 °C. After conducting critical temperature experiments, the potential of MgO coating was observed to be greater than anticipated when compared to the main material, MgH₂.