Timepix3 detectors are the latest generation of hybrid active pixel detectors of the Medipix/Timepix family. Such detectors consist of an active sensor lay
This work is focused on the inspection of carbon fibre reinforced plastic composites (CFRP) combined with metal components. It is well known that the high absorption of metallic parts degrades the quality of radiographic measurements (contrast) and causes typical metal artefacts in X-ray computed tomography (CT) reconstruction. It will be shown that these problems can be successfully solved utilizing the dual energy CT method (DECT), which is typically used for the material decomposition of complex objects. In other words, DECT can help differentiate object components with a similar overall attenuation or visualise low attenuation components that are next to high attenuation ones. The application of DECT to analyse honeycomb sandwich panels and CFRP parts joined with metal fasteners will be presented in the article
20 October 2011 in IEEE Transactions on Nuclear Science
Pixelated photon counting semiconductor X-ray detectors like the Medipix feature adjustable energy thresholds allowing selective counting of photons of a specified energy. This development permits for energy selective X-ray imaging with advanced material information. Furthermore the photon counting function principle of these detectors allows X-ray imaging with reduced noise, providing contrast improvement in low contrast objects. The aim of this study is to analyze the behavior of the new Medipix3 detector, especially regarding flatfield correction for X-ray imaging applications. First high resolution low contrast X-ray images and energy selective X-ray images acquired with the Medipix3 detector are presented as well in this paper.
Fast tomography measurements are still done almost exclusively within the domain of synchrotrons. However, recent progress in radio diagnostic instrumentation has enabled researchers to perform time-lapse computed tomography (4D-CT) even under laboratory conditions with standard X-Ray sources. Thus, fast time-dependent processes within materials with relatively high X-Ray attenuation can be monitored. The article describes the in-situ tomographic monitoring of crack formation and propagation in a quasi-brittle silicate matrix composite subjected to three point bending. A three-dimensional CT volume containing the region of interest (ROI) in the specimen is imaged over a period of time while the continuously increasing load causes crack initiation and propagation, creating a dynamic volume dataset. An acquisition time of 50 seconds for one full angle tomography with 400 projections makes this tomographic system one of the fastest systems in the world. The resulting visualizations provide qualitative information concerning progressive crack propagation within areas of lower material density. Differential images then allow displaying the spatial orientation of the crack over time. The results were further processed for a quantitative analysis of image quality using various methods of beam hardening correction.