There are many ways that ship designers can do to get the minimum engine power with the desire ship speed. One of the ways is to design the bow shape with the aim of minimizing ship resistance. In this study, the ship resistance of hard-chine monohull with two different bow shapes that conventional and inverted bows are analyzed. CFD (Computational Fluid Dynamics) approach by using Shear Stress Transport (SST) as turbulence model is used. Different ship speed by Froude numbers Fr 0.2 to 0.7 is applied. The simulation results give convincing evidence that the inverted bow produces lower total resistance compared to the conventional one by about 5% reduction
It is well known that biofouling increases a ship’s resistance and nominal wake. For submarines, any change to the circumferential variation of the nominal wake in the propeller plane will affect the variation of the flow over the propeller blade, and hence the fluctuating forces, and noise, generated by the propeller. The ANSYS FLUENT commercial Reynolds-Averaged Navier Stokes Computational Fluid Dynamics solver was used to investigate the influence of both the longitudinal and vertical distribution of biofouling on the resistance and wake, including the circumferential variation of the nominal wake, on a submarine, using the well-known Suboff standard submarine. For the present work, the k-ε turbulence model was selected, as this is commonly used in this field and is generally considered acceptable. To handle different boundary layer thicknesses in the flow fields, the whole y+ formulation was employed, enabling automatic switching between low and high Reynolds boundary wall models. The numerical solver used for the simulations is based on the finite volume method, which discretizes the RANS equations. In this approach, a segregated model was utilized in the solver, and the convection terms were discretized using the second-order upwind scheme to enhance solution accuracy. The criteria for the near wall are between 30 and 100, and the value of y+ for the present case is 84. It is shown that fouling over only the forward third of the submarine results in a greater increase in resistance than fouling over only the aft third. Fouling over only the lower half of the submarine results in greater resistance than fouling over only the forward third, but less than fouling over the whole of the hull. Fouling over only the forward third of the hull has less influence on the circumferential variation of the wake than fouling over the aft third only of the hull. The results show the importance of keeping the forward area of the hull clean when considering resistance only, whereas keeping the aft area of the hull clean is important when considering the uniformity of the nominal wake into the propeller.
1 June 2023 in IOP Conference Series: Earth and Environmental Science
Nowadays, the development of unmanned vehicles is significantly increased. Since the remotely operated vehicle (ROV) has more advantages than Diver. Then, ROV has an important role in underwater inspection and research in various sectors, such as offshore infrastructure development. ROV will give some critical information to the operator about an underwater inspection like bathymetry, pipeline inspection, and the other crucial subsea structure that the divers can’t reach. The optimization design has been carried out to determine ROV operational requirements in Madura Strait by Total-Based Method. ROV will be divided into 3 leading function groups, they are Features, Survive and Operate. Every group will be divided into Function Breakdown Structure (FBS). FBS will be divided again into Work Breakdown Structure (WBS). The optimum design will be determined by linking every breakdown function. The results are the ROV has 2MP 1080P resolution for camera, 2000 lumens for lighting, 50 m detection area for sonar and echosounder, 100 N grip force for Gripper, equipped with stainless steel frame, 2 hours long for operational duration, 5kg.f for thruster, operated with cable 300 m long and equipped with 6-unit thruster.
22 February 2023 in Journal of Marine-Earth Science and Technology
In recent years there have been many crossing vessels, especially those designed and built domestically. At the concept design stage, designers generally use the parent ship design method to determine the main dimension by taking one example of a reference ship with specifications close to the owner's requirements. However, this will be an obstacle if the existing ship specifications are unavailable, so designers must be able to perform initial calculations, especially predictions of the Lightweight (LWT). This paper introduces empirical formulas that utilize regression analysis to estimate LWT of Indonesia Single Ended Ro-Ro ferries. The formula of LWT based on Gross Tonnage (GT) requirements are presented.
Submarines and other underwater vessels are widely employed in the naval sector for defense purposes as well as in the civilian realm for scientific and recreational purposes. However, challenges such as biofouling caused by bacteria and algae can significantly impact performance and environmental effects. This study investigated the impact of biofouling on the U209 submarine by analysing how the location of roughness affects drag, with particular emphasis on frictional drag. Computational Fluid Dynamics (CFD) was employed to assess the impact of biofouling on the turbulent flow characteristics of ship hull surfaces with varying roughness, operating within the range of velocity = 9.7 knot – 29.1 knot. The submarine analysis was conducted under complete submersion without any water disturbance. The increase in drag resulted from the variation in the surface of the submarine hull. The drag increased from 8.5% to 18.2% for partial hull roughness and from 30.5% to 46.9% for overall roughness. The entire surface irregularity of the hull led to a significant increase in the drag. This can be explained by the results that as the surface area affected by biofouling increases, the amount of turbulent flow around the hull also increases, resulting in greater resistance, particularly in terms of frictional drag.