Josue Rafael Montes Martínez

Dr. Josue Rafael Montes Martínez


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2024 in Robotics
Verified
Journal Article
Open access
PDF file
JVJOSE FRANCISCO VILLA
JOSE FRANCISCO VILLA
Antonio EstradaAntonio Estrada
Antonio Estrada
RHRodrigo Hernandez
Rodrigo Hernandez
JMJosue Rafael Montes Martínez
Josue Rafael Montes Martínez
DBDarío Bringas-Posadas
Darío Bringas-Posadas
Edgar FrancoEdgar Franco
Edgar Franco
In practice, most industrial robot manipulators use PID (Proportional + Integral + Derivative) controllers, thanks to their simplicity and adequate performance under certain conditions. Normally, this type of controller has a good performance in tasks where the robot moves freely, performing movements without contact with its environment. However, complications arise in applications such as the AFP (Automated Fiber Placement) process, where a high degree of precision and repeatability is required in the control of parameters such as position and compression force for the production of composite parts. The control of these parameters is a major challenge in terms of quality and productivity of the final product, mainly due to the complex geometry of the part and the type of tooling with which the AFP system is equipped. In the last decades, several control system approaches have been proposed in the literature, such as classical, adaptive or sliding mode control theory based methodologies. Nevertheless, such strategies present difficulties to change their dynamics since their design consider only some set of disturbances. This article presents a novel intelligent type control algorithm based on back-propagation neural networks (BP-NNs) combined with classical PID/PI control schemes for force/position control in manipulator robots. The PID/PI controllers are responsible for the main control action, while the BP-NNs contributes with its ability to estimate and compensate online the dynamic variations of the AFP process. It is proven that the proposed control achieves both, stability in the Lyapunov sense for the desired interaction force between the end-effector and the environment, and position trajectory tracking for the robot tip in Cartesian space. The performance and efficiency of the proposed control is evaluated by numerical simulations in MATLAB-Simulink environment, obtaining as results that the errors for the desired force and the tracking of complex trajectories are reduced to a range below 5% in root mean square error (RMSE).

7 August 2018 in International Journal of Circuit Theory and Applications
Verified
Journal Article
Closed access
FCFernando Carrizosa‐Corral
Fernando Carrizosa‐Corral
AVAlberto Vazquez-Cervantes
Alberto Vazquez-Cervantes
JMJosue Rafael Montes Martínez
Josue Rafael Montes Martínez
KHKarla-Teresa Hernández-Díaz
Karla-Teresa Hernández-Díaz
JVJulio César Solano Vargas
Julio César Solano Vargas
Hugo Jimenez HernandezHugo Jimenez Hernandez
Hugo Jimenez Hernandez

29 April 2026 in IEEE Access
Verified
Journal Article
Open access
RARaymundo Ramos Alvarado
Raymundo Ramos Alvarado
JMJosue Rafael Montes Martínez
Josue Rafael Montes Martínez
MCMadeleine Medina Castillo
Madeleine Medina Castillo
IMIsrael Santacruz Mondragón
Israel Santacruz Mondragón
FHFabiola Hernández Hernández
Fabiola Hernández Hernández
XSX. Yamile Sandoval-Castro
X. Yamile Sandoval-Castro
Soft origami robots offer unique advantages in flexibility and adaptability. However, their precise inverse kinematics modeling remains a challenge due to highly nonlinear kinematic behavior caused by actuator backlash and material compliance. This work proposes an approach based on an Adaptive Neuro-Fuzzy Inference System (ANFIS) to approximate the inverse kinematics of a Yoshimura origami-based continuum robot. A camera vision system is used to acquire robot motion data, using the pinhole model and Zhang’s method for camera calibration. Reliable data (x, y end-effector coordinates) for kinematic learning were obtained using the calibrated system. The ANFIS system converged after 150 training epochs and was experimentally validated using quantitative error metrics, including repeatability (0.009-0.190 cm) and accuracy (0.052-0.355 cm), despite nonlinearities associated with TPU-95A hyperelastic behavior. Unlike conventional model-based approaches, the proposed ANFIS learning framework provides an experimentally validated data-driven solution to the inverse kinematics problem of tendon-driven continuum robots and demonstrates robustness within the validated operating region under tendon backlash and material compliance.

19 December 2023 in Applied System Innovation
Verified
Journal Article
Open access
PDF file
JMJosue Rafael Montes Martínez
Josue Rafael Montes Martínez
Hugo Jimenez HernandezHugo Jimenez Hernandez
Hugo Jimenez Hernandez
AHAna-Marcela Herrera-Navarro
Ana-Marcela Herrera-Navarro
LJLuis Antonio Diaz Jimenez
Luis Antonio Diaz Jimenez
Jorge Luis Pérez RamosJorge Luis Pérez Ramos
Jorge Luis Pérez Ramos
JVJulio Cesar Solano Vargas
Julio Cesar Solano Vargas
Artificial vision system applications have generated significant interest as they allow information to be obtained through one or several of the cameras that can be found in daily life in many places, such as parks, avenues, squares, houses, etc. When the aim is to obtain information from large areas, it can become complicated if it is necessary to track an object of interest, such as people or vehicles, due to the vision space that a single camera can cover; this opens the way to distributed zone monitoring systems made up of a set of cameras that aim to cover a larger area. Distributed zone monitoring systems add great versatility, becoming more complex in terms of the complexity of information analysis, communication, interoperability, and heterogeneity in the interpretation of information. In the literature, the development of distributed schemes has focused on representing data communication and sharing challenges. Currently, there are no specific criteria for information exchange and analysis in a distributed system; hence, different models and architectures have been proposed. In this work, the authors present a framework to provide homogeneity in a distributed monitoring system. The information is obtained from different cameras, where a global reference system is defined for generated trajectories, which are mapped independently of the model used to obtain the dynamics of the movement of people within the vision area of a distributed system, thus allowing for its use in works where there is a large amount of information from heterogeneous sources. Furthermore, we propose a novel similarity metric that allows for information queries from heterogeneous sources. Finally, to evaluate the proposed performance, the authors developed several distributed query applications in an augmented reality system based on realistic environments and historical data retrieval using a client–server model.