Zhonghong Dong

Prof. Dr. Zhonghong Dong


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 October 2021 in Polymers
Verified
Journal Article
Open access
PDF file
CZChi Zhang
Chi Zhang
LLLei Liu
Lei Liu
KXkanghui xu kanghui xu
kanghui xu kanghui xu
ZDZhonghong Dong
Zhonghong Dong
YDYuxi Ding
Yuxi Ding
PLPengfei Li
Pengfei Li
Suction cups of cephalopods show a preeminent performance when absorbing irregular or flat objects. In this paper, an octopi-inspired suction cup, driven by hydraulically coupled dielectric elastomer actuators (HCDEAs), is proposed, which is considered to be controlled easily and have compact structure. To investigate the performance of suction cups, experiments have been conducted to clarify the effect of the pre-stretch ratio and chamber angle on suction forces. It could be seen that both factors have a complicated influence on suction forces, and the best performance obtained was a reasonable combination of the pre-stretch ratio and chamber angle. Here, we achieved a maximum suction force of 175 mN with λp = 1.2, α = 23° under a DC voltage of 3500 V. To enhance the capacity and adaptation of the suction cup, flat objects of various types of materials were introduced as targets. Experimental results displayed that for tested materials, including a dry/wet acrylic plate, CD, ceramic wafer, and aluminum plate, the suction cup showed outstanding performance of absorbing and lifting the target without any damage or scratch to them. Our research may serve as a guide to the optimal design and provide insights into the performance of the HCDEAs-actuated suction cup.

1 July 2022 in AIP Advances
Verified
Journal Article
Open access
PDF file
CZChi Zhang
Chi Zhang
HHHaoran He
Haoran He
YLYunchuang Li
Yunchuang Li
YSYanhui Sun
Yanhui Sun
ZDZhonghong Dong
Zhonghong Dong
As a novel kind of focus tunable lens, dielectric elastomer actuated liquid lens has a compact structure, fast response, low cost, and outstanding tunability, which makes it attract extensive attention. Here, we present a computational model of a dielectric elastomer actuated lens with dual chambers that consist of three elastic membranes and two disconnected chambers filled with conductive and transparent liquid. The intermediate layer actuated by applied voltage deforms, changing the curvature of passive membranes and obtaining a new focal length. The simulation results calculated by the shooting method with two guessed values agree well with the experimental results. Based on this model, the effects of a set of parameters, including chamber radii, shear modulus, permittivity, prestretch ratios, and injected liquid volumes, on the tuning performance of the lens are analyzed. It is found that, by regulating the liquid volume in each chamber, both the initial focal length and the tuning range can be adjusted easily. Under the condition with specific liquid volumes, the lens possesses both positive and negative focal length during voltage actuation, indicating promoted tuning performance, which is acclaimed for optimal design.

16 April 2024 in Water
Verified
Journal Article
Open access
PDF file
YZYaozhong Zhang
Yaozhong Zhang
HZHan Zhang
Han Zhang
HLHengxing Lan
Hengxing Lan
YLYunchuang Li
Yunchuang Li
HLHonggang Liu
Honggang Liu
ZDZhonghong Dong
Zhonghong Dong
Soil water content (SWC) plays a vital role in agricultural management, geotechnical engineering, hydrological modeling, and climate research. Image-based SWC recognition methods show great potential compared to traditional methods. However, their accuracy and efficiency limitations hinder wide application due to their status as a nascent approach. To address this, we design the LG-SWC-R3 model based on an attention mechanism to leverage its powerful learning capabilities. To enhance efficiency, we propose a simple yet effective encoder–decoder architecture (PVP-Transformer-ED) designed on the principle of eliminating redundant spatial information from images. This architecture involves masking a high proportion of soil images and predicting the original image from the unmasked area to aid the PVP-Transformer-ED in understanding the spatial information correlation of the soil image. Subsequently, we fine-tune the SWC recognition model on the pre-trained encoder of the PVP-Transformer-ED. Extensive experimental results demonstrate the excellent performance of our designed model (R2 = 0.950, RMSE = 1.351%, MAPE = 0.081, MAE = 1.369%), surpassing traditional models. Although this method involves processing only a small fraction of original image pixels (approximately 25%), which may impact model performance, it significantly reduces training time while maintaining model error within an acceptable range. Our study provides valuable references and insights for the popularization and application of image-based SWC recognition methods.

23 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
XYXing Yang
Xing Yang
CZChunguo Zhang
Chunguo Zhang
PWPanpan Wu
Panpan Wu
AXAnye Xu
Anye Xu
PJPengfei Ju
Pengfei Ju
ZDZhonghong Dong
Zhonghong Dong
The fatigue behavior of metal specimens is influenced by defects, material properties, and loading. This study aims to establish a multi-scale fatigue crack growth model that describes physically short crack (PSC) and long crack (LC) behavior. The model allows the calculation of crack growth rates for uniaxial loading at different stress ratios based on the material properties and specimen geometry. Furthermore, the model integrates the Gaussian distribution theory to consider material heterogeneity and the experimental measurement errors that cause fatigue scatter. The crack growth rate and fatigue life of metal specimens with different notch geometry were predicted. The curves generated by the multi-scale model were mainly consistent with the test data from the published literature at the PSC and LC stages.

1 January 2025 in Materials Research Express
Verified
Journal Article
Open access
YLYi Li
Yi Li
DHDapeng Hu
Dapeng Hu
YXYangming Xu
Yangming Xu
BWBo Wang
Bo Wang
YZYongjun Zhou
Yongjun Zhou
ZDZhonghong Dong
Zhonghong Dong
The Q345qD bridge steels exposed to severe corrosion environments undergo mechanical property degradation, posing significant safety risks for sea-crossing bridges. Assessing the health of corroded bridge steel structures under load conditions in a manner that avoids causing damage can effectively prevent these intensifying safety hazards. To investigate the impact of corrosion on the mechanical performance of these steels, six sets of standard specimens underwent corrosion ranging from 0 to 896 h. Subsequently, during tensile testing, an image acquisition platform was established to utilize Digital Image Correlation (DIC) techniques for capturing and observing the tensile loading processes of various corroded specimens. Analysis of stress–strain curves and strain field evolution patterns provided insights into the deterioration of mechanical properties of Q345qD bridge steels after corrosion. For corroded bridge steel structures, defects caused by the corrosion pits can still result in localized strain concentration under low load levels. At higher load levels, mass loss due to corrosion or reduced cross-sectional dimensions of load-bearing elements are the primary causes of mechanical performance decline, precipitating overall structural failure. These findings provide some references for routine maintenance of steel structures of cross-sea bridges.

1 February 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
HJHongjie Jin
Hongjie Jin
ZDZhonghong Dong
Zhonghong Dong
Liguo ZangLiguo Zang
Liguo Zang
YLYaowei Li
Yaowei Li
The three-dimensional modeling and analysis of virtual pavement are conducted for the complex and diverse test pavements in the vehicle reliability driving test. Firstly, a complete pavement unevenness acquisition system is constructed, and secondly, the classification and processing methods of different pavements are determined according to the actual working conditions and load spectrum data of the test pavement in the test site to provide a theoretical basis for the virtual pavement modeling. At the same time, considering that the test pavement also includes various complex pavement conditions such as curves, slopes and lateral inclination, the structural composition and differences of plane curves, longitudinal ramps and cross-sections are analyzed to provide a guarantee for the further establishment of an accurate 3D pavement model. Finally, the 3D virtual pavement model of typical test pavements is established according to the theory and methods of the above research, and the accuracy of random pavement reconstruction is analyzed, which provides accurate and effective technical support for the simulation of automobile reliability driving tests.