Oxygen post annealing is a promising method for improving the quality of the SiC metal oxide semiconductor (MOS) interface without the introduction of foreign atoms. In addition, a low oxygen partial pressure annealing atmosphere would prevent the additional oxidation of SiC, inhibiting the generation of new defects. This work focuses on the effect and mechanism of low oxygen partial pressure annealing at different temperatures (900–1250 °C) in the SiO2/SiC stack. N2 was used as a protective gas to achieve the low oxygen partial pressure annealing atmosphere. X-ray photoelectron spectroscopy (XPS) characterization was carried out to confirm that there are no N atoms at or near the interface. Based on the reduction in interface trap density (Dit) and border trap density (Nbt), low oxygen partial pressure annealing is proven to be an effective method in improving the interface quality. Vacuum annealing results and time of flight secondary ion mass spectrometry (ToF-SIMS) results reveal that the oxygen vacancy (V[O]) filling near the interface is the dominant annealing mechanism. The V[O] near the interface is filled more by O2 in the annealing atmosphere with the increase in temperature.
Post‐oxidation annealing in oxygen (O2) ambient can improve the quality of the SiO2/SiC stack without introducing foreign atoms. In order to reveal the annealing mechanism at different oxygen partial pressures (P(O2)), this work focuses on the dependence of the annealing effect on P(O2) in a wide range from 0.01 Pa to 101 kPa for SiO2/SiC stack. In order to minimize the C‐related defects generated during SiC oxidation, the SiO2/SiC stacks are formed by oxidizing the deposited Si on the SiC epitaxial layer. The electrical characteristics of the annealed samples show that low P(O2) is beneficial to improve the interface quality, and high P(O2) is beneficial to improve the oxide layer quality. In addition, time of flight secondary ion mass spectrometry and X‐ray photoelectron spectroscopy analysis shows that the distribution and filling of oxygen vacancies (V[O]) are consistent with the electrical results. Finally, a model describing V[O] filling amount with P(O2) is proposed to quantitatively characterize the dependence of the annealing effect on P(O2), which shows that the filling amount of V[O] is proportional to P(O2)n (n∼0.065). This model provides theoretical support for improving the quality of SiC MOS by O2 annealing.