In $_{\text{2}}$ O $_{\text{3}}$ has been recognized as a wide-gap transparent semiconductor oxide with high mobility, in which the oxygen plays an important role in its electronic properties. Here, we investigate the effects of air, O $_{\text{3}}$ and N $_{\text{2}}$ annealing on the electrical characteristics of a-In $_{\text{2}}$ O $_{\text{3}}$ thin film transistors (TFTs) by analyzing the behavior of weakly bonded oxygen (O $_{\text{wb}}$ ), excess oxygen (O $_{\text{ex}}$ ), and oxygen vacancy (V $_{\text{O}}$ ) in the channel layer. X-ray diffraction (XRD) result indicates an amorphous phase of In $_{\text{2}}$ O $_{\text{3}}$ layer after annealing. The oxygen behavior and bonding information before and after annealing of the In $_{\text{2}}$ O $_{\text{3}}$ films are investigated via X-ray photoelectron spectroscopy (XPS) measurements. The a-In $_{\text{2}}$ O $_{\text{3}}$ TFTs with field-effect mobility of 50–60 cm $^{\text{2}}$ /Vs and enhanced reliability are achieved by optimizing channel thickness and annealing conditions in air. The large threshold voltage shifting, reduced mobility, and low ON/OFF ratio of O $_{\text{3}}$ -annealed In $_{\text{2}}$ O $_{\text{3}}$ TFT are attributed to the existence of O $_{\text{ex}}$ . The hump-effect observed in N $_{\text{2}}$ -annealed In $_{\text{2}}$ O $_{\text{3}}$ TFT is attributed to the creation of a parasitic channel with high V $_{\text{O}}$ level above the main channel. The results reveal that O $_{\text{wb}}$ can be removed by thermal treatment, and V $_{\text{O}}$ can be partially filled and stabilized without introducing O $_{\text{ex}}$ by annealing the as-deposited In $_{\text{2}}$ O $_{\text{3}}$ TFTs in air at appropriate condition.
Oxygen post annealing is a promising method for improving the quality of the SiC metal oxide semiconductor (MOS) interface without the introduction of foreign atoms. In addition, a low oxygen partial pressure annealing atmosphere would prevent the additional oxidation of SiC, inhibiting the generation of new defects. This work focuses on the effect and mechanism of low oxygen partial pressure annealing at different temperatures (900–1250 °C) in the SiO2/SiC stack. N2 was used as a protective gas to achieve the low oxygen partial pressure annealing atmosphere. X-ray photoelectron spectroscopy (XPS) characterization was carried out to confirm that there are no N atoms at or near the interface. Based on the reduction in interface trap density (Dit) and border trap density (Nbt), low oxygen partial pressure annealing is proven to be an effective method in improving the interface quality. Vacuum annealing results and time of flight secondary ion mass spectrometry (ToF-SIMS) results reveal that the oxygen vacancy (V[O]) filling near the interface is the dominant annealing mechanism. The V[O] near the interface is filled more by O2 in the annealing atmosphere with the increase in temperature.
In this study, we propose a novel approach for modulating the threshold voltage (Vth) and subthreshold swing (SS) of indium gallium zinc oxide (IGZO) thin-film transistors (TFTs). The method relies on enhancing the Schottky barrier height (SBH) at the source/drain (S/D) contacts, which induces a positive shift in Vth and improves the SS by promoting carrier accumulation. Different from the conventional mechanism governed by channel electrons accumulation, the conduction in these IGZO TFTs is determined by the source–channel Schottky barrier. To validate this method, we fabricated IGZO Schottky barrier TFTs (SBTFTs) using platinum (Pt) as the S/D contacts material. Owing to its high work function, Pt forms an elevated SBH with the IGZO channel. Replacing conventional indium tin oxide (ITO) contacts with Pt resulted in a reduction in SS from 119 mV/dec to 87 mV/dec and a positive Vth shift from -0.10 V to +1.40 V. Furthermore, the bias stability was significantly improved, as evidenced by a reduced positive bias temperature instability (PBTI) shift from +0.52 V to +0.10 V under 2 MV/cm for 3600 s at 25 oC. This demonstration confirms that engineering the Schottky barrier can effectively enhance the transfer characteristics and bias stability of IGZO TFTs.
Gate oxide quality is a critical factor affecting the reliability of SiC MOSFETs. In this work, we elucidate the effect of differences in the formation mechanisms of low-density C-related defects between 3C-SiC and 4H-SiC on gate oxide quality and report that homoepitaxy 3C-SiC MOS capacitors exhibit extremely superior gate oxide quality compared to 4H-SiC counterparts. This study concluded that the long diffusion channels and low chemical bonding energy of 3C-SiC enable higher oxygen diffusion coefficient and lower diffusion activation energy, forming fewer residual carbon and a dense SiO2 layer, leading to superior gate oxide quality. This result is confirmed by electrical characterization, Fourier transform infrared spectroscopy, and x-ray photoelectron spectroscopy tests. Experimental results demonstrate that homoepitaxy 3C-SiC MOS capacitors achieve low interface trap density (on the order of 1011 cm−2 eV−1), low near-interface trap density (two orders of magnitude lower), high gate oxide breakdown field strength, and more stable threshold voltage and also show that 3C-SiC/SiO2 has a low content of carbon-related defects such as oxidized by-products SiOxCy and carbon clusters, which further verifies that low-density C-related defects are a key factor in achieving high gate oxide quality. The findings in this work allow homoepitaxy 3C SiC to effectively solve the problem of poor gate oxide quality in 4H-SiC MOSFETs.