Sustainable building materials for integrated (structural and thermal) retrofitting are the need of the hour to retrofit/upgrade the seismic vulnerable and ill-insulated existing building stocks. At the same time, the use of natural fibers and their recyclability could help construct safer and more sustainable buildings. This paper presents three aspects of jute fiber products: (1) the evaluation of the mechanical performance of the jute nets (2.5 cm × 2.5 cm and 2.5 cm and 1.25 cm mesh configurations) through tensile strength tests (with the aim for these to be used in upgrading masonry wall with natural fiber textile reinforced mortars (NFTRM) systems); (2) the hundred percentage recyclability of left-over jute fibers (collected during the net fabrication and failed nets post-tensile strength tests) for the composite mortar preparation; (3) and the evaluation of insulation capacity of the recycled jute net fiber composite mortar (RJNFCM) through thermal conductivity (TC) measurements, when a maximum amount of 12.5% of recycled jute fiber could be added in the mortar mixture at laboratory conditions and with available instruments Notably, when more than the said amount was used, the fiber–mortar bonding was found to be not optimal for the composite mortar preparation. These studies have been carried out considering these products’ applicability for integrated retrofitting purposes. It has been found that the denser mesh configuration (2.5 cm × 1.25 cm) is 35.80% stiffer than the other net configurations (2.5 cm × 2.5 cm). Also, the mesh configuration (2.5 cm × 1.25 cm) shows about 60% more capability to absorb strain energy. TC tests have demonstrated the moderate insulation capacity of these composite mortar samples, and the TC values obtained from the tests range from 0.110 (W/mK) to 0.121 (W/mK).

This study presents a comprehensive review of various advanced methodologies that have been used to enhance the structural and thermal performance of masonry walls through innovative and sustainable retrofitting/upgrading techniques. Focusing on three primary approaches—mechanical/structural retrofitting, thermal retrofitting, and integrated (structural and thermal) retrofitting, this paper critically examines various masonry-strengthening strategies. Retrofitting techniques are categorized by material use and objectives. Fiber-based solutions include insulation materials, fiber composite mortar for strength, FRP for high-strength reinforcement, and TRM for durability. According to the relevant objectives, retrofitting can enhance structural stability (FRP, TRM), improve thermal insulation, or combine both for integrated performance. Particular emphasis is placed on the effectiveness of TRM systems, with a comparative analysis of man-made (glass, steel textile) and natural fiber-based TRM solutions. Regarding integrating natural fibers into TRM systems, this study highlights their potential as eco-friendly alternatives that reduce environmental impact while maintaining or improving structural integrity. Furthermore, it highlights and examines techniques for testing masonry walls. In this context, this review highlights the applicability of natural fiber as a sustainable building material in various retrofitting/upgrading solutions.

The present paper illustrates the mechanical properties of a new structural product called Recycled Thermoplastic Timber (RTT), manufactured in Sardinia (Italy) and made of recycled plastics. The preliminary results of an experimental campaign aimed at assessing the main mechanical and physical properties of RTT are presented and discussed. Unreinforced and steel-reinforced thermoplastic timber profiles have been tested in laboratory and some mechanical and physical properties have been evaluated also varying the climatic conditions. Furthermore, weathering properties have been checked by testing the resistance to freezing and thawing. In light of the results since now achieved the prospect of using RTT as an eco-friendly alternative to wood and other building materials is discussed.