Nithyananda B S

Dr. Nithyananda B S

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 December 2023 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
VBVINAY K B
VINAY K B
GPG. V. Naveen Prakash
G. V. Naveen Prakash
DGD. S. Rakshith Gowda
D. S. Rakshith Gowda
NSNithyananda B S
Nithyananda B S
RKRanjith K
Ranjith K
SNSrikantamurthy Ningaiah
Srikantamurthy Ningaiah
Present work focusses on investigating the effect of process parameters such as feed rate and spindle speed on quality characteristics of the hole, i.e., surface roughness (Ra) and circularity at entry and exit in the drilling of aluminium (Al) 6061 reinforced with different volume fraction of silicon nitride (Si3N4). Optimum parameters for Ra and circularity of hole at entry and exit are obtained as feed rate at 0.125 mm/rev, spindle speed at 300 rpm, diameter of drill at 8 mm, and % Vol. of Si3N4 at 5%. Using Analysis of Variance (ANOVA), we observed that spindle speed is the most influential parameter followed by feed rate.

4 January 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
NSNithyananda B S
Nithyananda B S
GPG. V. Naveen Prakash
G. V. Naveen Prakash
NANaveen Ankegowda
Naveen Ankegowda
VBVINAY K B
VINAY K B
AAA. Anand
A. Anand
India imports fossil fuels to meet its energy needs, and the need is anticipated to increase over the coming years. The constant usage of crude fuel will initiate its depletion in due course, necessitating the hunt for substitute fuels. One of the most promising alternatives to fossil fuels is determined to be biofuels. Fuels made from second-generation feedstocks, particularly non-edible oils, may change the game in this situation. The use of Simarouba non-edible oil as a substitute for diesel in common rail direct injection (CRDI) engines is the subject of the current piece of research. Running a CRDI engine with Simarouba biodiesel blends may not be suitable under the same operating conditions as running a diesel engine. To optimize performance, the ideal conditions for operating a CRDI engine with Simarouba biodiesel mixes needs to be discovered. The control settings in this study that affect the engine’s performance viz., fuel temperature (FPT), fuel injection pressure (IP), and injection time (IT) are designed using the Taguchi technique. Under full load conditions of 12 kg, for the biodiesel blends viz., SB5, SB10, and SB20, studies were conducted using the Taguchi L9 orthogonal array (OA). Through experimentation, performance and emission responses were obtained. For analysis, six engine responses were considered. The analysis shows that each response is uniquely impacted by the engine control parameters. Therefore, it might be challenging to pinpoint the ideal circumstances that would improve performance and lower emissions. Thus, this presents an example of a multi-response optimization problem. For this reason, multiple response optimization uses Taguchi-Grey Relational Analysis (TGRA). According to TGRA, the ideal settings to increase engine performance while using Simarouba biodiesel blends as fuel are an FPT of 40 °C, an IT of 21° bTDC, and an IP of 600 bar.

3 September 2020 in Research Square
Verified
Preprint
Open access
PDF file
NANaveen Ankegowda
Naveen Ankegowda
GPG V Naveen Prakash
G V Naveen Prakash
KRK Ravi
K Ravi
KIKhalid Imran
Khalid Imran
VBVINAY K B
VINAY K B
NSNithyananda B S
Nithyananda B S
A comparative study of the effect of co-sputtering specifically mag­netron sputtering process input factors on surface roughness of W and Al2O3 thin film developed on the SS304 and Copper(Cu) substrates in the argon atmosphere. The input parameters have been varied based on the Design of Experiments specifically Center Composite Design experimental plan. Atomic Force microscope has been used to determine the average surface roughness in nanometer of all the samples as per experimental combinations. By using ANOVA method, the effect of factors on roughness and regression model have been developed, which express degree to input parameter can effect on the surface roughness. Analysis of surface roughness of W and Al2O3 thin film developed above said different substrates have been presented.

26 July 2023
Verified
Conference Paper
Open access
PDF file
NSNithyananda B S
Nithyananda B S
GPG.V. Naveen Prakash
G.V. Naveen Prakash
VAV.N. Manjunath Aradhya
V.N. Manjunath Aradhya
SKS.A. Mohan Krishna
S.A. Mohan Krishna
KVK.B. Vinay
K.B. Vinay
KIKhalid Imran
Khalid Imran
The evaluation of performance and emission of Common Rail Direct Injection (CRDI) engine fuelled by various biodiesel at different operating conditions is time consuming and expensive. This can be overcome by using prediction techniques like GRNN. The GRNN model is developed using ‘newgrnn’ function in Matlab R2019b software to predict the performance and emission responses of CRDI engine for simarouba biodiesel. A total of 27 experimental dataset of each biodiesel is used for development of model. Out of 27 experimental dataset, 21 datasets are selected randomly for training the model. The remaining 6 datasets are utilized for testing the GRNN model. In this study, 20 different values of spread parameters within the range 0.05 to 1 with step increment of 0.05 are chosen. As a result, 20 simulations are performed and the best predicted results are chosen based on least mean error. The optimum spread parameter for simarouba, pongamia and composite biodiesel GRNN model was found to be 0.1, 0.1 and 0.05 respectively. The Root Mean Square Error (RMSE) values of different responses are found to be acceptable. The results indicated that GRNN model for the prediction of engine responses yields good correlation with experimental values and are acceptable for new predictions.

26 September 2019 in Journal of Advanced Research in Mechanical Engineering and Technology
Verified
Journal Article
Closed access
PDF file
NSNithyananda B S
Nithyananda B S
The methyl esters of vegetable oils, known as biodiesel are becoming increasingly popular because of their low environmental impact and potential as a green alternative fuel for diesel engine. Non-edible oils are second generation biodiesel feedstock which contributes meagre of total global biodiesel production. Still there is a wide scope to explore potential non-edible oil feedstocks for biodiesel. Chemical structures are different from one feedstock to other in terms of chain length, degree of unsaturation, double bond configuration and number of double bonds. These contribute for fuel properties of biodiesel. The experimental characterization of biodiesel and its blends requires significant amount of sample, standardized equipment’s and time. Therefore, it is very much required to consider the prediction model to estimate fuel properties of biodiesel. ANN Prediction modelling can be a useful tool in accurately predicting biodiesel fuel properties instead of choosing costly and time-consuming experimental tests. The main aim of this paper is to review the literatures to discuss the application of ANN approach to characterize the biodiesel and its blends. This review has concluded that the ANN approach has high potential to accelerate the biodiesel research in India. How to cite this article:Nithyananda BS, Anand A, Prakash GVN. A Review on Application of ANN Model for the Prediction of Fuel Properties of Biodiesel. J Adv Res Mech Engi Tech 2019; 6(1&2): 32-37.

1 August 2026 in Sigma Journal of Engineering and Natural Sciences
Verified
Journal Article
Closed access
PDF file
NANaveen Ankegowda
Naveen Ankegowda
RSRakshith Gowda D. S.
Rakshith Gowda D. S.
NSNithyananda B S
Nithyananda B S
There has been a wider scope for the development of dental implants with high bioactivity and low toxicity. The current study strives to address the issue by designing a dental implant with a pathway to inject the bioactive agent. The safety and reliability of the proposed design are tested for different materials using a finite element approach. Modeling of the implant is done in SOLIDWORKS®. To perform engineering analysis, ANSYS Workbench 2023 R1® software is used. The reliability and safety of the design are tested with three implant materials, including Titanium Grade 5 (Ti 6Al 4V), (y–tzp), and HGC-1-C. Static structural analysis is carried out to investigate the Von Mises stress, maximum principal strain, total deformation, and factor of safety. Modal analysis results show that the Ti-6Al-4V exhibits the highest natural frequency for the proposed design. The Ti-6Al-4V model shows a remarkable alloy composition and demonstrated minimal total deformation. From the analysis of these results, we deduce that the design is indeed safe. The fabrication is conducted with an emphasis on ensuring a secure design.