Stainless steel, as a popular corrosion resistant material, is still vulnerable to pitting corrosion in the marine environment. Therefore, in order to ensure the safety of stainless steel in the marine environment, it is necessary to implement corresponding protective measures. Titanium dioxide (TiO2), as an N-type semiconductor with excellent photoelectric properties, is widely used in the field of cathodic protection. However, as a photogenerated cathodic corrosion protection material, TiO2 has the disadvantages of low conductivity and high carrier recombination rate. Therefore, WS2 and NIS were introduced in this paper to modify it. TiO2/WS2/NiS (TWN) composites with Type-Ⅱ heterojunction structure were prepared by hydrothermal method and titration method. The results reveal TWN5 showed the best photoelectrochemical (PEC) performance, and the photocurrent density was 69% higher than that of a pure TiO2 photoanode, and the photochemical and photocathodic protection performance was significantly better than that of pure TiO2. Under simulated ocean conditions, the self-corrosion potential of 304ss combined with TW5 and TWN5 photoanodes is reduced to −0.64 V and −0.7 V, respectively. The main reason is that the contact surfaces of WS2 and TiO2 formed a Type II heterostructure, which accelerates the separation and diffusion processes of photoinduced carriers. In addition, the plasmon resonance effect of NiS improves the ability to absorb visible light, and the metallic-like feature of NiS also promotes charge separation.
The catalytic partial oxidation of methane (CPOM) to methanol has been regarded as a promising approach for methane utilization, despite that the conversion remains a formidable challenge in the perspective of catalysts. A novel catalyst system of multi-wall carbon nanotubes (MWCNTs) that supported Fe2O3 with existing I2, consisting of non-noble metal and working in weak acid at an ambient temperature, was investigated for CPOM. MWCNTs supported the Fe2O3 catalyst, which was prepared by the impregnation method and characterized via HRTEM, XRD, XPS, FT-IR, and BET techniques. The characterization results reveal that, as a non-noble metal catalyst, the Fe2O3/MWCNTs catalyst had a good catalytic performance and stability in the CPOM. With the variation of reaction pressure and the dosage of Fe2O3/MWCNTs, the catalyst system obtained the highest methane conversion rate of 7.41% and methanol selectivity of 86.3%, which is analogous to that of the equivalently strong acid catalyst system. The I2-Fe2O3/MWCNTs catalyst system has great potential in the application of CPOM under mild, environmentally benign conditions, such as non-noble metal requirement, ambient temperature, and weak acid. The reaction mechanism was discussed.
18 September 2026 in Journal of Thermal Analysis and Calorimetry