This study reports the optoelectronic characterization of few‐layer ReSe2field effect transistors at different pressures. The output curves reveal dominant n‐type behavior and a low Schottky barrier at the metal contacts. The transfer curves show a significant hysteresis that can be exploited in memory devices with an order ofmagnitude memory window and good cycling. The devices are dramatically affected by air pressure; their conductance and mobility increase with the lowering pressure that desorbs electronegative air molecules from the surface of the material. The photoresponse under white super‐continuum laser illumination reveals that the device exhibits positive photoconductivity (PPC) at ambient and low (≈1 mbar) pressure and negative photoconductivity (NPC) in a higher vacuum (≈10−4 mbar). The transition from PPC to NPC can be explained by considering that the photoresponse is affected by molecule desorption, which yields PPC at higher pressure, and defect trapping of photogenerated carriers, which can dominate at lower pressures. The transient behavior of the device exposed to laser pulses shows a faster response and a higher photodetection efficiency at ambient pressure, with the highest signal‐to‐noise ratio at the valley of the transfer curve between p‐ and n‐type conduction.
24 April 2023 in Journal of Physics and Chemistry of Solids
The Schottky barrier diode is a unipolar electronic device formed by the heterojunction of a metal and a semiconductor, widely used in various electronic and optoelectronic applications. Its rectifying current–voltage characteristic is typically derived using thermionic emission theory, which describes the transport of carriers over the Schottky barrier formed at the metal-semiconductor interface. In this paper, after briefly reviewing the metal-semiconductor heterojunction fundamentals and Landauer’s approach to electric transport, we propose an alternative way to derive the current–voltage behavior of a Schottky diode using Landauer’s formalism. This derivation can be directly applied to Schottky contacts between metals and low-dimensional materials, as demonstrated in the case of a 2D material. Additionally, we extend the proposed approach to account for tunneling currents through the barrier. Finally, we validate our findings with experimental data from a commercial Schottky diode, demonstrating excellent agreement. We also discuss non-ideal effects such as image-force lowering and lateral inhomogeneity of the Schottky barrier. This paper thus proposes an accessible and modern approach to understanding the Schottky diode current–voltage characteristics, making it suitable for both graduate- and postgraduate-level instruction.
Nanotube and nanowire transistors hold great promises for future electronic and optoelectronic devices owing to their downscaling possibilities. In this work, a single multi‐walled tungsten disulfide (WS2) nanotube is utilized as the channel of a back‐gated field‐effect transistor. The device exhibits a p‐type behavior in ambient conditions, with a hole mobility µp ≈ 1.4 cm2V−1s−1 and a subthreshold swing SS ≈ 10 V dec−1. Current–voltage characterization at different temperatures reveals that the device presents two slightly different asymmetric Schottky barriers at drain and source contacts. Self‐powered photoconduction driven by the photovoltaic effect is demonstrated, and a photoresponsivity R ≈ 10 mAW−1 at 2 V drain bias and room temperature. Moreover, the transistor is tested for data storage applications. A two‐state memory is reported, where positive and negative gate pulses drive the switching between two different current states, separated by a window of 130%. Finally, gate and light pulses are combined to demonstrate an optoelectronic memory with four well‐separated states. The results herein presented are promising for data storage, Boolean logic, and neural network applications.
We studied the temperature dependent transport properties and memory behaviour of ultrathin black phosphorus field-effect transistors. The devices show electrical conductance and field-effect mobility that decreases with the rising temperature. The field effect mobility, which depends also on the gate voltage sweep range, is 283 cm2V−1s−1 at 150 K and reduces to 33 cm2V−1s−1 at 340 K, when the voltage gate sweep range is 50 V. The transfer characteristics show a hysteresis width that increases with the temperature and is exploited to enable non-volatile memories with a wider programming window at higher temperatures.
Herein, the fabrication and electrical characterization of multilayer black phosphorus (BP)‐based field effect transistors with Ni or NiCr alloy contacts are reported. The devices show p‐type conduction and hysteresis in the transfer characteristics that enable their use as nonvolatile memories. The differences between Ni and NiCr contacts are investigated and the Y‐function method is applied to extract the channel mobility up to 112 cm2 V−1 s−1 and the contact resistances. Ni contacts present specific contact resistance of 6.3 k Ω μm that increases to 18.1 k Ω μm for NiCr. These findings are important for the technological exploitation of multilayer BP in a new class of electronic and optoelectronic devices.