The restriction of lead content in alloys for the production of solder, based on the Directive of the European Parliament and of the Council of the European Union of 8 June 2011, which is also known as RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), had a very positive impact on research into lead-free solder alloys, as well as on the economic impact of the production of solders. It opened the door to issues relating to the mechanical properties of lead-free solders and the microhardness of formed joints, with the aim of increasing their quality and efforts to reduce production costs. In addition to the production efficiency increase, without the need for the manual removal of so-called slagging, the moderation of oxide formation on the melt surface, standing for an increase in the yield of the total amount of solder, represents one of the many factors influencing the production of lead-free alloys for tin-based soldering. This work deals with the issues of material selection for the production of lead-free solders. Temperature affects the formation of different phases when there is a change in the concentration of the elements involved because it can be a negative aspect for soldering. Therefore, it is necessary to have detailed knowledge on the entire process that takes place during temperature changes.
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a 3D model, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt that is in front of the turbine under the water surface. For the gantry crane which moves along a track, the directional and vertical unevennesses were determined by experiment and are given in graphic and numerical form in (mm), relating to A track and B track with a total track length of 450 (m). Based on the knowledge of the unevenness of the rail track, the four random functional dependencies defining the irregularities of the individual rails as input variables were used for the kinematic excitation of the individual wheels of the gantry crane. The stress analysis was performed for a travel speed of 30 (m.min-1) and a lift of 10 (t) under the given loading. The results of the stress analysis are presented in graphic form.
The restriction of lead content in alloys for the production of the solder based on the Directive of the European Parliament and of the Council of the European Union of 08.06.2011 which is also known as RoHS (Restriction of the use of certain ...
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a Working model 3D, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt in fr...