Ján Vavro

Prof. Ján Vavro


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ĽMĽuboš Marček
Ľuboš Marček
JVJán Vavro
Ján Vavro
JVJán Vavro
Ján Vavro
The introduced work deals with the microscopic analysis of metallographically prepared selected metal materials structures, using a scanning electron microscope (SEM). Prepared samples of seamless steel pipes were subjected to a thorough microscopic examination from the outer surface to the inner regions in order to interpret the specific structure, including the change in the inner surfaces due to wear. The experiment demonstrated that the microstructure and character of the surfaces play a key role in the behavior of metallic materials in real conditions of hot water heating. Four pipe samples were monitored according to their use. The unused steel pipe (designated as sample No. 1) exhibited a rough outer surface with identified inclusions, while the used pipe (designated as sample No. 2) showed marks of intergranular corrosion and significant wear after long-term use. The older pipe (designated as sample No. 3) showed a decarburized area and inclusions containing sulfides and aluminum. The steel pipe with corrosion layers (designated as sample No. 4) exhibited a continuous corrosion layer with cavitation and cracks. The results of this study offer a comprehensive view of the influence of the nature of microstructure and wear on water flow in metal pipes, with an emphasis on the identification of possible risks associated with geometry change, corrosion, and wear. The findings form the basis for predicting degradation and appropriate maintenance in order to ensure their long and reliable service life under real conditions of use. They offer the possibility of continuing and expanding research and analysis of the use of metallic materials in comparison with polymers and composites.

25 April 2025 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
MTMiloš Taraba
Miloš Taraba
JVJán Vavro
Ján Vavro
JVJán Vavro
Ján Vavro
The article is focused on the investigation of the impact of the implementation of mechanization into the welding workplace, for the production of cylinders from austenitic X5CrNi18 10 chromium nickel steel. The welds are assembled into a production line for the processing of puff pastry. In addition to the technical improvement of the process and the verification of the sufficient quality of the welds, calculations were used to prove that after the implementation of the change, there was a significant reduction in the production time. By introducing a higher level of mechanization and necessary technological changes, the production time was reduced by up to half, compared with the original technological procedure, including an increase in quality parameters and it led to a reduction in the production costs of the welding workplace. A significant consequence of the proposed change was connected with its impact on workplace safety. Austenitic chromium nickel steel Implementation Mechanization Welding process Positioner

13 September 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JKJana Körmendy
Jana Körmendy
JVJán Vavro
Ján Vavro
JVJán Vavro
Ján Vavro
The restriction of lead content in alloys for the production of solder, based on the Directive of the European Parliament and of the Council of the European Union of 8 June 2011, which is also known as RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), had a very positive impact on research into lead-free solder alloys, as well as on the economic impact of the production of solders. It opened the door to issues relating to the mechanical properties of lead-free solders and the microhardness of formed joints, with the aim of increasing their quality and efforts to reduce production costs. In addition to the production efficiency increase, without the need for the manual removal of so-called slagging, the moderation of oxide formation on the melt surface, standing for an increase in the yield of the total amount of solder, represents one of the many factors influencing the production of lead-free alloys for tin-based soldering. This work deals with the issues of material selection for the production of lead-free solders. Temperature affects the formation of different phases when there is a change in the concentration of the elements involved because it can be a negative aspect for soldering. Therefore, it is necessary to have detailed knowledge on the entire process that takes place during temperature changes.

25 April 2025 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
ĽMĽuboš Marček
Ľuboš Marček
JVJán Vavro
Ján Vavro
JVJán Vavro
Ján Vavro
The presented work deals with the microscopic analysis of metallographically prepared structures of selected metal materials, new and several years of operation of hot water heating system pipes. Microscopic examination was carried out using a scanning electron microscope (SEM). Prepared samples of seamless steel pipes were subjected to thorough microscopic examination from the outer surface to the inner areas in order to interpret the specific structure, including changes in the inner surfaces due to wear. The study of microstructures and surface layers of unused and operated metal materials from randomly selected locations creates an overall picture of their sensitivity to the aqueous medium to which they are exposed for a long time. The prediction of the failure of selected metal pipes will be based on a comprehensive approach to solving all dependent and independent variables of the operated heating system. One of them is appropriate maintenance (continuous inspection), which must ensure reliable and, above all, safe operation and thus the service life of the pipes in real conditions of use. The experiment showed that the microstructure and character of surfaces play a key role in the behavior of metallic materials in real conditions. The achieved results provide scientific knowledge in the field of using materials for hot water heating. They contribute to the ability to appropriately evaluate the material used, to design the material and its joining technology, for various types of constructions of piping systems of sanitary and technical installations in the field of technical equipment of buildings. It is clear from the results of the work that the materials will achieve the prescribed service life. However, there are many aspects that contribute to the process of corrosion degradation. The contribution of this work to the field of technical practice is the identification of these critical aspects that condition the emergence of degradation processes, the design of processes and parameters for the safe operation of hot water heating.

1 September 2024 in Journal of Applied Mathematics and Computational Mechanics
Verified
Journal Article
Open access
PDF file
JVJán Vavro
Ján Vavro
JJJán Vavro Jr.
Ján Vavro Jr.
ĽMĽuboš Marček
Ľuboš Marček
JKJana Kuricová
Jana Kuricová
Journal of Applied Mathematics and Computational Mechanics, Prace Naukowe Instytutu Matematyki i Informatyki, Politechnika Częstochowska, Scientific Research of the Institute of Mathematics and Computer Science, Czestochowa University of Technology

1 January 2023 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
JVJán Vavro
Ján Vavro
ĽMĽuboš Marček
Ľuboš Marček
MTMiloš Taraba
Miloš Taraba
LKLukas Klimek
Lukas Klimek
PČP. Čerňava
P. Čerňava
JKJ. Kuricová
J. Kuricová
The main aim of the research work is connected with the implementation of the vector method into the SolidWorks software program in order to determine the kinematic quantities of individual solid bodies in the whole investigated system. The rapid convergence was achieved owing to the application of the Newton-Raphson method for complex types of mechanisms in relation to the motion of mutually bonded solid body systems, involving the passive resistances in individual kinematic bonds. The process of dynamic analysis is based on kinematic analysis. Dynamic analysis allows to create the correct design of a solid body system with respect to the dynamic loading. A five-item/member planar mechanism was used as an example (representative) to interpret the introduced analysis. The graphical dependence of the kinematic and dynamic quantities in some points is given in dependence on angle of rotation for the driving item/member and in dependence on time.