The article is focused on the investigation of the impact of the implementation of mechanization into the welding workplace, for the production of cylinders from austenitic X5CrNi18 10 chromium nickel steel. The welds are assembled into a production line for the processing of puff pastry. In addition to the technical improvement of the process and the verification of the sufficient quality of the welds, calculations were used to prove that after the implementation of the change, there was a significant reduction in the production time. By introducing a higher level of mechanization and necessary technological changes, the production time was reduced by up to half, compared with the original technological procedure, including an increase in quality parameters and it led to a reduction in the production costs of the welding workplace. A significant consequence of the proposed change was connected with its impact on workplace safety. Austenitic chromium nickel steel Implementation Mechanization Welding process Positioner
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a 3D model, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt that is in front of the turbine under the water surface. For the gantry crane which moves along a track, the directional and vertical unevennesses were determined by experiment and are given in graphic and numerical form in (mm), relating to A track and B track with a total track length of 450 (m). Based on the knowledge of the unevenness of the rail track, the four random functional dependencies defining the irregularities of the individual rails as input variables were used for the kinematic excitation of the individual wheels of the gantry crane. The stress analysis was performed for a travel speed of 30 (m.min-1) and a lift of 10 (t) under the given loading. The results of the stress analysis are presented in graphic form.
The given paper deals with the defects propagation in car tires for passenger vehicles under dynamic loading. The occurrence of defects has the significant influence on the lifetime and quality of the tire, especially during its operation as a part of the vehicle. The given defects are closely connected with a safety in road traffic. The aim of the study was to carry out a non-destructive analysis of the car tire for the purpose to analyze the defects propagation as well as to introduce the defects classification and their location along with the whole course of rupture as a result of increasing speed, loading and the number of hours or kilometers driven. During the analysis, we used a non-destructive method for detecting defects using a non-destructive analyzer that works on the principle of shearography. The experimental measurement was carried out for 12 car tires. The measurement results are displayed from the non-destructive analyzer in the form of protocols from measurement and video display. The evaluation of the results of the measurement for the propagation of defects is displayed graphically. In relation to the tire casing, the analysis of the defects propagation can help design engineers to solve critical issues by choosing the right material, modifying dimensions of individual components or even by redesigning the overall construction of the tire casing and thus to increase the safety from the aspect of vehicle operation.
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a Working model 3D, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt in fr...
The main aim of the research work is connected with the implementation of the vector method into the SolidWorks software program in order to determine the kinematic quantities of individual solid bodies in the whole investigated system. The rapid convergence was achieved owing to the application of the Newton-Raphson method for complex types of mechanisms in relation to the motion of mutually bonded solid body systems, involving the passive resistances in individual kinematic bonds. The process of dynamic analysis is based on kinematic analysis. Dynamic analysis allows to create the correct design of a solid body system with respect to the dynamic loading. A five-item/member planar mechanism was used as an example (representative) to interpret the introduced analysis. The graphical dependence of the kinematic and dynamic quantities in some points is given in dependence on angle of rotation for the driving item/member and in dependence on time.