The introduced work deals with the microscopic analysis of metallographically prepared selected metal materials structures, using a scanning electron microscope (SEM). Prepared samples of seamless steel pipes were subjected to a thorough microscopic examination from the outer surface to the inner regions in order to interpret the specific structure, including the change in the inner surfaces due to wear. The experiment demonstrated that the microstructure and character of the surfaces play a key role in the behavior of metallic materials in real conditions of hot water heating. Four pipe samples were monitored according to their use. The unused steel pipe (designated as sample No. 1) exhibited a rough outer surface with identified inclusions, while the used pipe (designated as sample No. 2) showed marks of intergranular corrosion and significant wear after long-term use. The older pipe (designated as sample No. 3) showed a decarburized area and inclusions containing sulfides and aluminum. The steel pipe with corrosion layers (designated as sample No. 4) exhibited a continuous corrosion layer with cavitation and cracks. The results of this study offer a comprehensive view of the influence of the nature of microstructure and wear on water flow in metal pipes, with an emphasis on the identification of possible risks associated with geometry change, corrosion, and wear. The findings form the basis for predicting degradation and appropriate maintenance in order to ensure their long and reliable service life under real conditions of use. They offer the possibility of continuing and expanding research and analysis of the use of metallic materials in comparison with polymers and composites.
The presented work deals with the microscopic analysis of metallographically prepared structures of selected metal materials, new and several years of operation of hot water heating system pipes. Microscopic examination was carried out using a scanning electron microscope (SEM). Prepared samples of seamless steel pipes were subjected to thorough microscopic examination from the outer surface to the inner areas in order to interpret the specific structure, including changes in the inner surfaces due to wear. The study of microstructures and surface layers of unused and operated metal materials from randomly selected locations creates an overall picture of their sensitivity to the aqueous medium to which they are exposed for a long time. The prediction of the failure of selected metal pipes will be based on a comprehensive approach to solving all dependent and independent variables of the operated heating system. One of them is appropriate maintenance (continuous inspection), which must ensure reliable and, above all, safe operation and thus the service life of the pipes in real conditions of use. The experiment showed that the microstructure and character of surfaces play a key role in the behavior of metallic materials in real conditions. The achieved results provide scientific knowledge in the field of using materials for hot water heating. They contribute to the ability to appropriately evaluate the material used, to design the material and its joining technology, for various types of constructions of piping systems of sanitary and technical installations in the field of technical equipment of buildings. It is clear from the results of the work that the materials will achieve the prescribed service life. However, there are many aspects that contribute to the process of corrosion degradation. The contribution of this work to the field of technical practice is the identification of these critical aspects that condition the emergence of degradation processes, the design of processes and parameters for the safe operation of hot water heating.
1 September 2024 in Journal of Applied Mathematics and Computational Mechanics
Journal of Applied Mathematics and Computational Mechanics, Prace Naukowe Instytutu Matematyki i Informatyki, Politechnika Częstochowska, Scientific Research of the Institute of Mathematics and Computer Science, Czestochowa University of Technology
The main aim of the research work is connected with the implementation of the vector method into the SolidWorks software program in order to determine the kinematic quantities of individual solid bodies in the whole investigated system. The rapid convergence was achieved owing to the application of the Newton-Raphson method for complex types of mechanisms in relation to the motion of mutually bonded solid body systems, involving the passive resistances in individual kinematic bonds. The process of dynamic analysis is based on kinematic analysis. Dynamic analysis allows to create the correct design of a solid body system with respect to the dynamic loading. A five-item/member planar mechanism was used as an example (representative) to interpret the introduced analysis. The graphical dependence of the kinematic and dynamic quantities in some points is given in dependence on angle of rotation for the driving item/member and in dependence on time.
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a 3D model, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt that is in front of the turbine under the water surface. For the gantry crane which moves along a track, the directional and vertical unevennesses were determined by experiment and are given in graphic and numerical form in (mm), relating to A track and B track with a total track length of 450 (m). Based on the knowledge of the unevenness of the rail track, the four random functional dependencies defining the irregularities of the individual rails as input variables were used for the kinematic excitation of the individual wheels of the gantry crane. The stress analysis was performed for a travel speed of 30 (m.min-1) and a lift of 10 (t) under the given loading. The results of the stress analysis are presented in graphic form.
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a Working model 3D, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt in fr...