Investigating thermal transport at the Cu/Si interface holds significant importance, as understanding interface thermal conductance is crucial for enhancing materials interface thermal management, designing thermal interface materials, and improving the performance of thermoelectric devices. In this study, we conducted molecular dynamics simulations in conjunction with the Green–Kubo relation to calculate the thermal conductance of the Cu/Si interface. We successfully obtained Cu/Si interface potentials using the lattice inversion method. Our findings revealed that the thermal conductance of the Cu/Si interface is notably influenced by the interface structure. Specifically, the thermal conductance of the Cu(001)/Si(001) interface and the Cu(111)/Si(111) interface are similar, and both are higher than that of the Cu(110)/Si(110) interface. Furthermore, through first-principles calculations of the adhesion energy, we discovered that interface binding strength plays a critical role in determining interface thermal transport properties, and the influence of pressure was also discussed. This study contributes not only to the understanding of the thermal transport mechanisms at the Cu/Si interface but also provides important insights for designing novel interface materials.
The creation of carbon nanotubes has sparked a paradigm shift in the post-silicon era because of their decent electronic and optical properties. However, interface traps pose an obstacle in the realization of high-performance carbon nanotube field-effect transistors (CNTFETs). Herein, we systematically investigate the C−V characteristics of CNTFETs and propose a small-signal equivalent model to decouple the effects arising from interface traps. Moreover, intrinsic parameters associated with interface traps can be feasibly extracted using this approach. An analytical capacitance model is further developed to be incorporated into the well-established CNTFET virtual source model, and excellent agreement has been achieved between our simulation and the measured results of the as-fabricated MOSCAP. The models developed here help to gain insight into the physical properties of high-κ dielectric interface traps subjected to different processes and inform strategies to achieve high-performance CNTFETs.
Carbon nanotube field-effect transistors (CNTFETs) have demonstrated superior performance in integrated devices compared to conventional metal–oxide–semiconductor field-effect transistors (MOSFETs), with optimizations achieved through precise control of chirality, nanotube count, and channel length scaling. However, while these parameters significantly influence device characteristics, the effects of gate oxide engineering and strain-induced field modifications remain incompletely understood, requiring further investigation to fully exploit the potential of CNTFETs. In this study, we systematically investigate these phenomena by combining current transport modeling with first-principles calculations. Our analysis reveals that gate oxide thinning enhances drain–source current by improving gate control, but necessitates high- $$\kappa$$ dielectrics (≥ 25) to suppress direct tunneling leakage through Poisson’s equation solutions. At $$\kappa =25{\varepsilon }_{0}$$ , we achieved optimized FET metrics: saturation current (12 $$\upmu\mathrm A$$ ), transconductance (277 $$\upmu\mathrm S$$ ), and gate–source capacitance (103.4 $$\text{aF}$$ ), representing improvements over conventional SiO 2 -based designs. Furthermore, under uniaxial radial compressive strain ( $${\varepsilon }_{\text{yy}}$$ = 0.66), the saturation current increases by ~10 times compared to the unstrained case due to decreasing bandgap, while the threshold voltage and the subthreshold swing increase by ~2 times as well, lowering transistor switching efficiency and increasing power consumption. Therefore, strain engineering can provide a valid approach for performance-targeted design: high-frequency power amplifiers with large strains and low-power logic gates with small strains.
30 December 2025 in Journal of Physics: Condensed Matter
Thermal transport across metal/nonmetal interfaces plays a key role in the heat dissipation of micro- and nano-electronic devices. In this work, we investigate the interfacial thermal conductance of horizontally aligned carbon nanotube (CNT)/metal interfaces, which are more representative of practical device configurations. By combining nonequilibrium molecular dynamics with a two-temperature framework, the phonon heat flux and temperature profiles at the atomic scale are obtained and then incorporated into a steady-state heat conduction model for metal/nonmetal systems to determine the interfacial thermal resistance. The methodology is validated using the Cu/Si interface and subsequently applied to Cu/CNT and Ti/CNT interfaces. The calculated interfacial thermal conductances show good agreement with available experimental data and reveal the effects of interfacial bonding and structure on heat transport.