Reducing the rotation period through thinning and changing planting spacing can influence the technological properties of wood, with little attention paid to the effects of these variables on the raw material, which limits its processing in the wood sector. This work aimed to evaluate the physical and mechanical properties of wood from Anadenanthera peregrina juveniles thinned in three planting spacings (3 m × 3 m, 4 m × 4 m, and 5 m × 5 m). The physical properties in the base-top and pith–shell directions and the mechanical properties of the samples were evaluated. The results indicate better technological properties for wood with larger spacings. The physical properties showed decreasing trends in the base-top direction and increasing trends in the pith-bark direction, with a distinct trend in the degree of collapse. The average basic density of the different planting spacings varied between 0.47 g cm−3 and 0.63 g cm−3. The mechanical properties obtained for the 4 m × 4 m spacing were superior to those of the other spacings. Wood from young A. peregrina is an alternative for industrial processing, as wood from higher planting densities is more suitable for purposes that require resistance and rigidity.
Wood residues, as well as those from poultry farming, are generally disposed of irregularly, which causes damage to the environment, and thus poses a great challenge in terms of their use, a possible alternative is the manufacture of particleboards. For this, the following mechanical properties of the panels were evaluated: static bending (elasticity – MOE and rupture – MOR), internal bond strength (IB), Janka hardness (DJ), screw withdrawal resistance (SW), thickness swelling (TS), water absorption (WA), moisture, apparent density (DA) and density profile, in addition to morphological characterization by scanning electron microscope image. With the results obtained, it was possible to observe that the amount of residue influenced the density of the panel. The panel compaction ratio showed little variation (1.22–1.32), remaining close to the value considered ideal of 1.33. The percentage of waste added to the panels also influenced the increase in WA and TS, limiting the use of the panels to environments without humidity. The addition of the eggshell in the process negatively affected the mechanical characteristics of formulated particleboards, except for Janka hardness. The application of the resin together with the wood particles and eggshells can improve the mechanical properties. Based on the findings from this study, the medium-density particleboard produced can be used for making furniture and room partitioning without structural character.
Se identificó la influencia del tratamiento térmico en la obtención de compuestos tánicos condensables a partir de residuos de corteza de Pinus spp para la producción de adhesivo. Los tratamientos térmicos fueron: (a) corteza sin tratamiento térmico (testigo); (b) corteza expuesta a 60 °C durante 50 h en seco; (c) corteza expuesta a 120 °C durante 10 h en vapor; (d) corteza adherida al tronco expuesta a 120 °C durante 10 h en vapor. Para su caracterización química, la corteza fue molida y clasificada. Se extrajeron los compuestos tánicos mediante reflujo con agua destilada durante 2 h; se adicionaron sales de carbonato de sodio y sulfito de sodio, ambos a 5% en relación con la masa seca. Para el testigo fueron evaluadas las propiedades del tanino comercial de Acacia mearnsii (acacia negra). El proceso de extracción de taninos fue realizado en autoclave y se evaluaron las siguientes propiedades: viscosidad, pH, tiempo de formación de gel, contenido de sólidos y densidad. Tanto la corteza expuesta a 120 °C durante 10 horas en vapor como la adherida al tronco sometida a 120 °C a vapor durante 10 h, para ambas sales, exhibieron los mayores rendimientos de taninos. Los extractos tánicos obtenidos a partir de carbonato de sodio presentaron una estructura alcalina, alta viscosidad y menor tiempo de formación de gel. Sin embargo, los extractos obtenidos a partir de sulfito de sodio proporcionaron un carácter ácido y contenido de sólidos próximos a los encontrados en los extractos tánicos acuosos obtenido de la acacia negra.
The development of biomass-based adhesives has attracted interest as an alternative to petroleum-derived synthetic and potentially toxic adhesives. Pachira aquatica oil is a renewable raw material that can be incorporated into an MDI-based polyurethane system. In this study, the chemical composition and reactivity of P. aquatica oil were characterized using GC–MS, FTIR, and hydroxyl index measurements. The oil showed a predominance of saturated fatty acids, particularly methyl hexadecanoate (64.80%), derived from palmitic acid, and exhibited a low initial hydroxyl value. To enhance reactivity, the oil was transesterified with glycerol under different conditions, producing polyols with substantially increased hydroxyl values (412–769 mg KOH g−1), as confirmed by the intensified O–H and C–O bands in the FTIR spectra. The polyurethane adhesives were formulated from the selected polyols (P3 and P4) and evaluated at different NCO/OH ratios and pressing temperatures, using ABES shear tests. The highest ABES shear strength recorded was approximately 3.6 MPa, obtained for isocyanate indices between 0.8 and 1.0 and temperatures around 115 °C. Although this value represents the best performance among the tested conditions, it remains below the industrial benchmarks typically associated with the EN 205 standard (≈10 MPa). It is important to note that the ABES and EN 205 methods are not directly comparable due to differences in testing protocols. Nevertheless, the results indicate that, under the evaluated conditions, the adhesives exhibit limited mechanical performance and require further optimization.
This research aimed to evaluate the biological resistance to xylophagous organisms and the dimensional stability related to water absorption in plastic wood panels manufactured by compression molding and produced with pine wood and recycled thermoplastics. The wood–plastic composites (WPCs) were prepared from 50% pine sawdust and 50% recycled plastics (polyethylene terephthalate-PET, high-density polyethylene-HDPE, and polypropylene-PP). The thickness swelling test was carried out by immersing of the WPC samples in water at room temperature (25–30 °C) and evaluating the total change in WPC thickness after 1500 h (≈9 weeks or two months). In addition, the coefficient of initial swelling was evaluated to verify the variability of the swelling. For the biological resistance evaluation of the WPCs, tests were carried out with soil or arboreal termites (Nasutitermes corniger) and drywood termites (Cryptotermes brevis). The WPC loss of mass and termite mortality were evaluated. The use of PP promoted the best response to thickness swelling. The simple mathematical model adopted offers real predictions to evaluate the thickness of the swelling of the compounds in a given time. For some variables there were no statistical differences. It was shown that treatment 3 (T3) presented visual damage values between 0.4 for drywood termites and 9.4 for soil termites, in addition to 26% termite mortality, represented by the lowest survival time of 12 days. The developed treatments have resistance to termite attacks; these properties can be an important starting point for its use on a larger scale by the panel industries.