Douglas Donal Sarango-Julca

Dr. Douglas Donal Sarango-Julca


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
César Markus Alpaca ChacónCésar Markus Alpaca Chacón
César Markus Alpaca Chacón
Bismarck Jigena-AnteloBismarck Jigena-Antelo
Bismarck Jigena-Antelo
CQCesar Alejandro Quispe-Gonzales
Cesar Alejandro Quispe-Gonzales
DSDouglas Donal Sarango-Julca
Douglas Donal Sarango-Julca
ACAntonio Contreras
Antonio Contreras
Juan J. Muñoz-PerezJuan J. Muñoz-Perez
Juan J. Muñoz-Perez
This review updates the different categories and formulations of the calculation of longshore sediment transport (LST) and summarizes their advantages and disadvantages. Most of these methodologies require calibration for areas different from those studied by their authors. Thus, a method of validation and calibration is presented here by processing satellite images with CoastSat software (release v 2.7) to determine accretion and erosion volumes. This low-cost methodology was applied to Salaverry Beach (Peru) to compare the results of the different formulations. A range of variation between −96% and +68% was observed concerning the error, with van Rijn’s formula being the most accurate for this particular case.
1

1 December 2023 in Revista de Investigación de Física
Verified
Journal Article
Open access
PDF file
EAE. A. Rosales Asto
E. A. Rosales Asto
LZL. M. Palomino Zegarra
L. M. Palomino Zegarra
TBT. O. Velásquez Bejarano
T. O. Velásquez Bejarano
DSDouglas Donal Sarango-Julca
Douglas Donal Sarango-Julca
Los suelos expansivos tienen propiedades especiales y es difícil encontrar los parámetros de resistencia; ángulo de fricción interna y cohesión por la teoría de Morh-Coulomb, por ello es necesario evaluar las constantes elásticas que nos permite calcular el asentamiento y la carga admisible de estos suelos. La presente investigación tiene como objetivos determinar la deformación elástica y el módulo de elasticidad en arcillas expansivas, tomándose tres muestras de San Ignacio - Cajamarca (M-1, M-2, M-3) y una de Pavayacu – Loreto (M-4). Para determinar dichos parámetros se realizó ensayos en el Laboratorio de Mecánica de Suelos de la UNALM, se ejecutaron ensayos de expansión libre; y sobre las muestras expandidas se efectuaron los ensayos de consolidación unidimensional. Para una carga específica se efectuaron ciclos de carga y descarga hasta generar una histéresis donde las curvas de carga y descarga se sobreponen formando una línea que corresponde a un comportamiento elástico. Como artificio se trazó por el origen de la curva de consolidación una paralela a la última histéresis, la cual corresponde a la tangente de la curva de consolidación. Se determino la deformación elástica y la deformación plástica en forma independiente. Los valores obtenidos del módulo de elasticidad (Es) se encuentran dentro de los rangos de 41.8 kg/cm2 a 70.1 kg/cm2, dichos valores clasifican al suelo como arcillas blandas.

26 April 2025
Verified
Book Chapter
Closed access
PDF file
RMRUBEN MOGROVEJO
RUBEN MOGROVEJO
DSDouglas Donal Sarango-Julca
Douglas Donal Sarango-Julca
EGEfraín Jhiaromir Contreras Gutiérrez
Efraín Jhiaromir Contreras Gutiérrez
DGDaniel Minaya Gutiérrez
Daniel Minaya Gutiérrez
LGLuis Fernando Miranda Gutiérrez
Luis Fernando Miranda Gutiérrez

18 August 2025 in Revista de Investigación de Física
Verified
Journal Article
Open access
ERErick Rosales
Erick Rosales
LPLiz Palomino
Liz Palomino
TVTeresa Velásquez
Teresa Velásquez
DSDouglas Donal Sarango-Julca
Douglas Donal Sarango-Julca
The present work evaluates the susceptibility to piping of soils used in the construction of earth dams based on laboratory tests, for which an experimental device has been developed based on the methods for evaluating erosion in cohesive soils developed by Wan & Fell and on standard methods for identifying dispersive. 28 soil samples grouped into 7 types (CH, sandy CL, CL, SC, ML, MH and SM) were evaluated from which the critical shear stress (τc) and the representative index of erosion rate (Ĩ) were determined. allows characterizing the behavior of the soils analyzed as extremely fast for the SM sample, very fast for the ML samples, moderately fast for the MH and CH samples and moderately slow for the CL, sandy CL and SC samples whose values ​​for the conditions carried out vary from 0.1588 to 0.6607 being this parameter dimensionless. The significant factors that influence piping are the maximum dry density obtained from the compaction tests, the percentage of silt and the plasticity index. Piping occurs in soils without cohesion (silty sand) or with low plasticity (with a plasticity index less than 6 percent) and in cohesive soils with a plasticity index greater than 15 percent and with a silt percentage greater than 40 percent, compacted with the maximum dry density and the optimum moisture content obtained from the compaction tests.

1 December 2025 in Revista de Investigación de Física
Verified
Journal Article
Open access
DSDouglas Donal Sarango-Julca
Douglas Donal Sarango-Julca
JVJorge Gastelo Villanueva
Jorge Gastelo Villanueva
ACAristides Ramon Serruto Colque
Aristides Ramon Serruto Colque
YCYazid Cordero
Yazid Cordero
TBTeresa Olinda Velasquez Bejarano
Teresa Olinda Velasquez Bejarano
The gridded daily precipitation data from PISCO v2.1 and ERA5 are evaluated by applying the GR4J hydrological model to generate daily flows in the sub-basins located upstream of the Cahua hydrometric station, in the upper Pativilca River basin, under a semi-distributed approach by sub-basins. The RS Minerve platform is used for the construction of the semi-distributed hydrological model. 33 sub-basins upstream of the Cahua hydrometric station were identified using QGIS software. The gridded precipitation data from PISCO v2.1 and ERA5 were validated based on 14 rain gauge stations located in the study basin and nearby areas, with historical precipitation records that were statistically analyzed to assess their reliability. When applying the semi-distributed sub-basin GR4J hydrological model, in the calibration stage (2000-2010), a Nash-Sutcliffe value of 0.76 was obtained using the daily precipitation information PISCO v2.1 and a value of 0.74 when using the daily precipitation information from ERA5. In the model validation stage (2011-2016), Nash-Sutcliffe values of 0.79 and 0.75 were obtained using the daily precipitation information from the aforementioned databases. The results obtained indicate that with the daily information from PISCO v2.1, the semi-distributed sub-basin GR4J hydrological model better represents the daily natural flows occurring in the Pativilca basin.

16 December 2021 in Revista de Investigación de Física
Verified
Journal Article
Open access
PDF file
AAAbel Carmona Arteaga
Abel Carmona Arteaga
DSDouglas Donal Sarango-Julca
Douglas Donal Sarango-Julca
MPMario García Pérez
Mario García Pérez
Este trabajo se enfoca en el cálculo y validación de los parámetros usados para la generación de caudales de máximas avenidas a lo largo de 16 puntos de interés en el cauce principal del río Biabo. Debido a la insuficiente información de mediciones meteorológicas e hidrométricas dentro de la cuenca, se utilizó la información grillada de precipitación diaria de la base de datos PISCO v2.1 del SENAMHI, el modelo de curvas de duración frecuencia del estudio ILLA-SENAMHI-UNI, y el hidrograma unitario de Snyder, y los resultados obtenidos fueron calibrados en base a los registros de caudales máximos de la estación hidrométrica Requena-Biabo. Así, por ejemplo, para la cuenca de la estación Requena-Biabo, la comparación entre los caudales de máximas avenidas generados con los caudales registrados para diferentes tiempos de retorno, el error obtenido fluctúa entre ±5%.