José Pablo Aguiar-Moya

Dr. José Pablo Aguiar-Moya

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2015 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
JAJosé Pablo Aguiar-Moya
José Pablo Aguiar-Moya
JSJorge Salazar-Delgado
Jorge Salazar-Delgado
VBVivian Bonilla-Mora
Vivian Bonilla-Mora
EREllen Rodríguez-Castro
Ellen Rodríguez-Castro
FLFabricio Leiva-Villacorta
Fabricio Leiva-Villacorta
LLLuis Loría-Salazar
Luis Loría-Salazar
The structure of asphalt is generally considered to be a colloidal system where high molecular weight components (asphaltenes) are dissolved into an oily lower molecular weight matrix (maltenes). To better understand the morphology of the asphalt binder, the different components associated with this material were analysed under topographic and phase detection atomic force microscopy, and optical microscopy, for a specific asphalt binder type. The analysed asphalt binder was identified as a multi-phase type asphalt binder that exhibits four distinct phases: the para-phase which serves as a dispersing medium to the catana-phase (‘bee’ structure), the per-phase (area surrounding the catana-phase), as well as the sal-phase (smaller dispersed phase). A component analysis of the asphalt binder yielded that a form of the per-phase and catana-phase can be associated with the aromatics. The sal-phase was observed on the asphaltenes and resins. Furthermore, an additional filament-type structure was also identified on the resins. The analysis was also complemented by combining individual Saturates-Aromatics-Resins-Asfaltenes (SARA) components of the asphalt binder to observe the evolution of the different structures and morphology present in the asphalt binder. Enriched asphalt binder with 50% of each of the SARA fraction at a time was also analysed. It was determined that the size and shape of the different structures are a function of the combination of the different asphalt components. The effect of polymer modification and ageing due to temperature was briefly analysed. The results were also correlated with detailed infrared spectroscopy (FTIR) analysis of the different asphalt components.

29 March 2017 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
JAJosé Pablo Aguiar-Moya
José Pablo Aguiar-Moya
JSJorge Salazar-Delgado
Jorge Salazar-Delgado
AGAdriana García
Adriana García
AAlejandra Baldi
Alejandra Baldi
VBVivian Bonilla-Mora
Vivian Bonilla-Mora
LLLuis G Loría-Salazar
Luis G Loría-Salazar
This study focuses on morphological changes and micromechanical properties of bitumen and its components (maltenes and asphaltenes) under neat, laboratory short- and long-term, and long-term field ageing. The material was analysed by means of atomic force microscopy in pulsed force mode, allowing for material nano-mechanical measurements. It was concluded that the colloidal equilibrium of asphalt fractions is affected by a significant loss of low molecular weight components, and air oxidising the bitumen. In addition, stiffness and adhesion were measured for each condition. It was observed that the greatest contribution in stiffness is associated with polar components, while the adhesiveness is associated mainly with non-polar components. Finally, to relate the ageing process to chemical changes, Fourier transform infrared spectroscopy measurements were performed to quantify the functional groups associated with oxidation. Furthermore, thermodynamic analysis by means of differential scanning calorimetry was performed to explain some of the observed changes in micromechanical behaviour.

16 April 2019 in Sustainability
Verified
Journal Article
Open access
PDF file
MEMarianela Espinoza
Marianela Espinoza
NCNoelia Campos
Noelia Campos
RYRebekah Yang
Rebekah Yang
HOHasan Ozer
Hasan Ozer
JAJosé Pablo Aguiar-Moya
José Pablo Aguiar-Moya
Imad Al-QadiImad Al-Qadi
Imad Al-Qadi
The environmental impact of road construction and rehabilitation can be associated with the increase of greenhouse gas (GHG) emissions, which are highly related to climate change. Consequently, departments of transportation have recently focused on the development and implementation of tools to evaluate the performance of projects and minimize GHG emissions. An example is the use of life cycle assessment (LCA) to analyze and quantify the environmental impact of a product, system, or process, from cradle to grave. In this regard, the present case study quantifies the carbon footprint associated with the construction of the La Abundancia–Florencia highway, located in the province of San Carlos in Costa Rica. The analysis is also intended to generate consciousness both in the public and private sectors on the environmental impacts of road construction. After an LCA study, it was determined that the construction of the hot mix asphalt (HMA) layer generates a carbon footprint of 65.8 kg of CO2e per km of road. In addition, it was evident that HMA production generates the greatest environmental impact, among all the considered LCA production and construction stages, with a GHG contribution of 38% to 39% from bitumen only. Consequently, special attention to HMA production is required in order to minimize GHG emissions.

14 March 2019 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
AGAdriana García
Adriana García
JAJosé Pablo Aguiar-Moya
José Pablo Aguiar-Moya
JSJorge Salazar-Delgado
Jorge Salazar-Delgado
AAlejandra Baldi
Alejandra Baldi
LLLuis G Loría-Salazar
Luis G Loría-Salazar
This paper presents a micro and nano mechanical analysis method to measure the elastic modulus and properties of bitumen. Tests were performed using the AFM in pulsed force mode to determine the adhesion and stiffness of bitumen. In AFM contact mode, a methodology was developed to determine the modulus of elasticity of the bitumen using the nanoindentation technique for small-volume specimens using a Berkovich tip. Two different sources of bitumen were studied with a performance grade of PG 64 S (22) and PG 64 H (25), in its neat, RTFO, and RTFO + PAV aged conditions. The mechanical properties of the bitumen were analysed from the responses of the measured materials. The AFM images and mechanical results reveal that the properties of the bitumen are considerably affected by aging, associated with oxidation and variations in its morphology. Modulus measured by AFM was also compared to traditional G* measurements from a rheometer, and their relationship analysed.

28 June 2016 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
JAJosé Pablo Aguiar-Moya
José Pablo Aguiar-Moya
AAlejandra Baldi
Alejandra Baldi
JSJorge Salazar-Delgado
Jorge Salazar-Delgado
JPJuan F. Pacheco-Fallas
Juan F. Pacheco-Fallas
LLLuis Loria-Salazar
Luis Loria-Salazar
NCNéstor Cely-Leal
Néstor Cely-Leal
In Central and South America, pavement deterioration due to moisture is high. The deterioration is directly related to the compatibility between the asphalt and aggregates, as well as the cohesiveness of the asphalt matrix. The affinity between these materials affects how well the bond will behave in the presence of water, and therefore the susceptibility of the asphalt mixture to moisture in the long term. It is well accepted that traditional tests for assessing moisture damage are not necessarily representative of high moisture conditions, such as those present in Colombia and Costa Rica. Therefore, it is imperative that methods to quantify the actual moisture susceptibility of hot-mix asphalt be adopted and implemented in local specifications. In order to characterise the true adhesion properties of regional materials, both physicochemical and mechanical analysis has been implemented to determine the moisture susceptibility of different binder–aggregate combinations typically used in Costa Rica and Colombia. The effect of antistrip additives on the water resistance of such combinations was also evaluated. The asphalt bond strength test was applied to mechanically determine the adhesive and cohesive strength of the binder–aggregate pairs. In addition, the measurement of physicochemical properties such as surface free energies of aggregates and binders allowed the determination of work of adhesion, cohesion and debonding of asphalt from the aggregate surface in the presence of water. A correlation between the physicochemical and the mechanical properties was found for most of the cases.

1 July 2017 in International Journal of Pavement Research and Technology
Verified
Journal Article
Open access
FLFabricio Leiva
Fabricio Leiva
AVAdriana Vargas-Nordcbeck
Adriana Vargas-Nordcbeck
JAJosé Pablo Aguiar-Moya
José Pablo Aguiar-Moya