Ce Shen

Ce Shen


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 September 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
CSCe Shen
Ce Shen
SHSongbai He
Songbai He
XZXiaoyu Zhu
Xiaoyu Zhu
JPJun Peng
Jun Peng
TCTao Cao
Tao Cao
In this letter, the design of a broadband high-efficiency Doherty power amplifier (DPA) with a bandwidth of 1000 MHz for the 5G frequency band is proposed. The postmatching structure is employed to achieve broadband performance. The proposed DPA shows high efficiency at 6-dB output power back-off (OBO) in the entire 1000-MHz band. The DPA has been designed and implemented using commercial GaN HEMTs to validate the high efficiency and broadband characteristics. The fabricated DPA attains a measured 7.1-11.1-dB saturated gain and a 43.2-44.5-dBm saturated power. The 46%-52% and 58.6%-68.9% drain efficiencies are obtained at 6-dB OBO and saturation throughout the design band, respectively. A 20-MHz LTE modulated signal with a peak-to-average power ratio of 7.2 dB is also applied to the proposed DPA at 3.5 GHz. The average output power is 37.2 dBm. The measured ACPR is improved from -27 to -48.9 dBc with digital predistortion (DPD) performed.

25 April 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MMMingming Ma
Mingming Ma
FYFei You
Fei You
TQTing Qian
Ting Qian
CSCe Shen
Ce Shen
RQRongxing Qin
Rongxing Qin
SHSongbai He
Songbai He
A self-coupled resonator consisting of asymmetrical parallel-coupled microstrip transmission lines is proposed to design wide stopband dual-band bandpass filters. Due to the even-to-odd-mode analysis limitation to asymmetrical structure, a multiport analysis method is developed and applied to analyze the proposed self-coupled resonator and dual-band filter. According to the analysis, the proposed self-coupled resonator features a small frequency ratio of the second to the first resonances and controllable spurious responses, and its transmission zeros (TZs) are placed close to the position out-of-band spurs in order to achieve wide stopband. Moreover, a feed line consisting of tapped line loaded coupled line is investigated, resulting in flexible adjustment of the second passband external quality factor ( ${ \boldsymbol Q}_{ \boldsymbol e}$ ) with a minor influence on the first passband ${ \boldsymbol Q}_{ \boldsymbol e}$ . A dual-band BPF prototype with a frequency ratio of 1.59 is proposed and validated. It is operated at 2.34 and 3.72 GHz with the insertion loss of 1.05 and 1.86 dB, respectively. A return loss better than 20 dB is achieved at both passbands. The out-of-band rejection is better than 30 dB within the frequency range from 4.19 to 11.24 GHz, and the harmonic suppression is 39.97 dB at 14.88 GHz and 61.41 dB at 18.6 GHz. The measured results verify the analytical method presented in this article well.

18 February 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
RGRuibin Gao
Ruibin Gao
JPJingzhou Pang
Jingzhou Pang
TCTianfu Cai
Tianfu Cai
CSCe Shen
Ce Shen
WSWeimin Shi
Weimin Shi
AZAnding Zhu
Anding Zhu
This article presents a new method to design dual-band three-way Doherty power amplifiers (DPAs). A novel modified load modulation network (LMN) is constructed for enabling dual-mode Doherty operation with three-way configuration, providing enhanced high efficiency range in both modes. Moreover, a parallel load compensation network (LCN) is employed in the proposed three-way DPA to provide wideband performance in each operation band. A three-way dual-mode DPA using commercial gallium nitride high electron mobility transistors (GaN HEMTs) is then designed and manufactured to verify the proposed architecture. Frequency bands of 1.45–1.9 GHz in Mode I and 0.75–1.0 GHz in Mode II are achieved by the DPA, respectively. The fabricated DPA has a 9-dB output back-off (OBO) efficiency of 42.8%–57.7% and a saturated efficiency of 55.4%–70.1%. When driven by a 20-MHz long term evolution (LTE) modulated signal with 8-dB peak-to-average ratio (PAPR), the adjacent channel power ratio (ACPR) of the fabricated DPA is better than −49.9 dBc after digital predistortion at 0.9 and 1.7 GHz with average efficiency of 45.7% and 54.6%.

12 July 2023 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
ZXZehua Xiao
Zehua Xiao
FYFei You
Fei You
CSCe Shen
Ce Shen
QHQian He
Qian He
BPBo Pang
Bo Pang
SHSongbai He
Songbai He
This letter proposes a general design method for a linear Doherty power amplifier (DPA). With this method, the expanded or compressed amplitude-to-amplitude (AM-AM) and amplitude-to-phase (AM-PM) distortions of carrier power amplifier (PA) can be canceled at different back-off complex load impedance. In this design, a linear DPA is designed at 3.0–3.5 GHz for the prototype characterization. The measurement results show that the gain compression and phase variation are controlled within 1.3 dB and 5.5 $^\circ$ , respectively. Applying a 100 MHz 64-QAM signal with a 6-dB peak-to-average power ratio, without any additional linearization method, the adjacent channel power ratio (ACPR) is below $-$ 40 dBc, and the average drain efficiency (DE) is better than 41% at the average output power of 37 dBm when the carrier frequency is swept from 3.1 to 3.3 GHz.

10 January 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
ZXZehua Xiao
Zehua Xiao
FYFei You
Fei You
HPHao Peng
Hao Peng
YWYu Wang
Yu Wang
QHQian He
Qian He
SHSongbai He
Songbai He
This paper presents a 30-36 GHz CMOS power amplifier (PA) with a diode-connected analog linearizer dedicated to improving the output power and power-added efficiency (PAE) at 1-dB output compression point (OP1dB). The proposed analog linearizer performs a gain expansion, simultaneously introducing little phase distortion. In addition, a design procedure of the matching network between the analog linearizer and PA is analyzed to mitigate the impact of impedance variation caused by the control voltage and input power. As a proof of concept, the circuit is fabricated in a 65-nm CMOS process with a 0.31 mm2 total area. Measured output power and PAE at OP1dB are > 13.4 dBm and > 12.4%, where maximum improvement of 2.2 dB and 5.9% is achieved at 31 GHz when the analog linearizer is active. The saturated output power of > 16.2 dBm is obtained with the saturated PAE of > 21%. Applying a single carrier 256-QAM signal with a bandwidth of 400 MHz and a peak-to-average power ratio (PAPR) of 10.4 dB, the PA with the proposed analog linearizer can achieve the adjacent channel power ratio (ACPR) of -34 dBc at the output power of 6 dBm.

6 December 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
CSCe Shen
Ce Shen
SHSongbai He
Songbai He
TYTingting Yao
Tingting Yao
JPJun Peng
Jun Peng
ZXZehua Xiao
Zehua Xiao
FYFei You
Fei You
This letter uses a deembedded technique to extract the equivalent parasitic network of the transistor CGHV27015S. Through the obtained equivalent parasitic network, the theoretical impedance space of the continuous class-F mode is mapped to the package plane, which simplifies the design of Doherty power amplifier (DPA). At the same time, postmatching network and bias network are used to tune the harmonics, which improve the overall efficiency of the DPA. The DPA delivers a saturation output power ( $P_{\text {sat}}$ ) of 41.8–42.8 dBm from 3.1 to 3.6 GHz. The power-added efficiencies (PAEs) in the interested frequency band are 49.6%–53.4% and 35.4%–41.1% at the $P_{\text {sat}}$ and 6-dB output back-off (OBO) power levels, respectively. The saturation gain is 13.0–15.1 dB.