Jun Peng

Jun Peng

Auto-generated profile, based on publicly available information

Jun Peng

University of Electronic Science and Technology of China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 March 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
CLChuan Li
Chuan Li
FYFei You
Fei You
TYTingting Yao
Tingting Yao
JWJinchen Wang
Jinchen Wang
WSWen Shi
Wen Shi
SHSongbai He
Songbai He
In this article, a method for design automation high-efficiency power amplifiers (PAs) based on an optimization-oriented is proposed. The advantages of using particle swarm optimization to design PAs in electronic design automatic tools are analyzed, and then, simulated annealing is combined to form simulated annealing particle swarm optimization (SA-PSO). In this article, the perfectly inelastic collision used in conventional PSO is replaced by the perfectly elastic collision to improve the searching ability through reducing kinetic energy consumption. A stepped fitness function is defined to avoid the performance pit at a single-frequency point, and the concept “missing and returning” is introduced to solve the nonconvergence problem in simulation. Based on the improved SA-PSO algorithm, a broadband 10 W and a triband 6-W PA are designed. The broadband 10-W PA achieves an average drain efficiency (DE) of 62.5% and an output power of 41.2 dBm in the 0.8-3-GHz frequency band, respectively; the triband 6-W PA achieves an average of 57.4%/47.9%/47.3% DE and 37.7-/38.3-/37.4 dBm output power in 3.35-3.55-/5.75-5.95-/7.65-7.95-GHz frequency bands, respectively, while the gains of most stopbands reach less than 0 dB. With digital predistortion technology, the adjacent channel power ratio (ACPR) can reach less than -45 dBc.

9 April 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JWJinchen Wang
Jinchen Wang
SHSongbai He
Songbai He
FYFei You
Fei You
WSWeimin Yang Weimin Shi
Weimin Yang Weimin Shi
JPJun Peng
Jun Peng
CLChuan Li
Chuan Li
A method enabling the codesign of a high-efficiency power amplifier (PA) and a ring-resonator microstrip bandpass filter is proposed in this paper. Even-odd-mode analysis and a series of continuous modes (SCMs) are combined to realize broadband or multiband impedance matching as well as the suppression of undesired signals. The proposed codesign method can achieve both broadband and multiband frequency responses, and the designed component is relatively easy to analyze and fabricate due to its microstrip structure. For verification, a broadband and triband PA-filter components are designed and fabricated separately. The first component operates across 0.8-3.2 GHz (120%) with 39.7-42.9-dBm maximum output power and 57%-74% drain efficiency (DE). The second component, which has three passbands, covers several commercial frequencies with a measured output power of 39.6-41.3 dBm and DE from 62% to 68%. When these two components are driven by a 20-MHz long-term evolution signal with a peak-to-average power ratio of 6.2 dB, adjacent channel leakage ratios from -26.4 to -33.8 dBc and from -29.4 to -33.1 dBc are measured, respectively.

14 January 2021 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
WSWeimin Yang Weimin Shi
Weimin Yang Weimin Shi
WSWen Shi
Wen Shi
JPJun Peng
Jun Peng
LFLinping Feng
Linping Feng
YGYong Gao
Yong Gao
Chik Patrick YueChik Patrick Yue
Chik Patrick Yue
While continuous-mode Doherty power amplifier (CM-DPA) can achieve high efficiency at output back-off (OBO) power levels, their achievable bandwidth and load modulation have not yet been fully investigated. This brief reveals that the bandwidth of CM-DPA is limited by the impedance trajectories of the peaking transistors. In particular, the peaking transistor degrades the bandwidth in the high power region and limits the fractional bandwidth (FBW) of the CM-DPA. Moreover, based on post-matching Doherty architecture, an analytical method for harmonic control in CM-DPAs is presented. A broadband CM-DPA with harmonic control is implemented, fabricated and measured. The CM-DPA delivers a saturation output power (Psat) of 42.6-44.4 dBm from 1.50 to 2.55 GHz, i.e., FBW of 51.8%. The drain efficiencies in the interested frequency band are 50.7%-69.7% and 43.3%-57% at the Psat and 6-dB OBO power levels, respectively.

17 September 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
CSCe Shen
Ce Shen
SHSongbai He
Songbai He
XZXiaoyu Zhu
Xiaoyu Zhu
JPJun Peng
Jun Peng
TCTao Cao
Tao Cao
In this letter, the design of a broadband high-efficiency Doherty power amplifier (DPA) with a bandwidth of 1000 MHz for the 5G frequency band is proposed. The postmatching structure is employed to achieve broadband performance. The proposed DPA shows high efficiency at 6-dB output power back-off (OBO) in the entire 1000-MHz band. The DPA has been designed and implemented using commercial GaN HEMTs to validate the high efficiency and broadband characteristics. The fabricated DPA attains a measured 7.1-11.1-dB saturated gain and a 43.2-44.5-dBm saturated power. The 46%-52% and 58.6%-68.9% drain efficiencies are obtained at 6-dB OBO and saturation throughout the design band, respectively. A 20-MHz LTE modulated signal with a peak-to-average power ratio of 7.2 dB is also applied to the proposed DPA at 3.5 GHz. The average output power is 37.2 dBm. The measured ACPR is improved from -27 to -48.9 dBc with digital predistortion (DPD) performed.

27 December 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JPJingzhou Pang
Jingzhou Pang
YHYujie Han
Yujie Han
JPJun Peng
Jun Peng
MLMingyu Li
Mingyu Li
ZDZhijiang Dai
Zhijiang Dai
AZAnding Zhu
Anding Zhu
This article presents theoretical analysis and design methodology of a dual-mode three-way Doherty power amplifier (DPA) with an extended high-efficiency range and robust load mismatch adaptability. A nonlinear current model for active devices is established and employed to analyze the impact of load mismatches in the three-way DPA and a novel output combiner is proposed to minimize the mismatch impact by reconfiguring the gate bias conditions and setting distinct loads at the control port of the combiner. To validate the proposed DPA architecture and design approach, a prototype using commercial Gallium Nitride (GaN) transistors operated at the center frequency of 2.0 GHz was designed and fabricated. Under the ideal condition with a matched 50 $\Omega$ load, the fabricated DPA attains higher than 60% efficiency at 9 dB back-off. Through mode re-configuration, the proposed DPA presents 47.8%–56.7% back-off efficiency with less than 1.5 dB power fluctuation at 2:1 voltage standing wave ratio (VSWR) over 360 $^\circ$ phase span. When driven by a 80 MHz signal with 8 dB peak to average power ratio (PAPR), the DPA achieves 45.7%–52.2% average efficiency and better than $-$ 45 dBc adjacent channel power ratio (ACPR) with digital pre-distortion (DPD) under the load mismatch conditions.

2 October 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WSWeimin Yang Weimin Shi
Weimin Yang Weimin Shi
SHSongbai He
Songbai He
JPJun Peng
Jun Peng
JWJinchen Wang
Jinchen Wang
In this paper, based on dual-input configuration (DIC), a method for implementing ultra-wideband or multi-band load-modulated Doherty power amplifiers (DPAs) is proposed. The proposed DIC possesses two Doherty operating modes with respect to working frequency. Each sub-amplifier of the DIC plays a changeable role versus frequency, changing from carrier to peaking or changing from peaking to carrier. A dual-input Doherty power amplifier working over 0.7-3 GHz (relative bandwidth of 124%) is constructed for validating the proposed theory. Under continuous-wave (CW) signal excitation, experimental results illustrate the fabricated power amplifier achieves a 6 dB back-off efficiency of over 40% across 0.7-3 GHz. The maximum output power of the fabricated DPA changes from 42.2 dBm to 44.7 dBm across the whole working band. Meanwhile, a 20 MHz wideband modulated signal with a peak-to-average ratio of 6.04 dB is utilized to stimulate the fabricated DPA at 0.9, 1.8, 2.4 and 2.8 GHz. After digital pre-distortion, the measured adjacent channel leakage ratios are less than -50 dBc at four experimental frequency points.