Songbai He

Songbai He

Auto-generated profile, based on publicly available information

Songbai He

University of Electronic Science and Technology of China

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 March 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
CLChuan Li
Chuan Li
FYFei You
Fei You
TYTingting Yao
Tingting Yao
JWJinchen Wang
Jinchen Wang
WSWen Shi
Wen Shi
SHSongbai He
Songbai He
In this article, a method for design automation high-efficiency power amplifiers (PAs) based on an optimization-oriented is proposed. The advantages of using particle swarm optimization to design PAs in electronic design automatic tools are analyzed, and then, simulated annealing is combined to form simulated annealing particle swarm optimization (SA-PSO). In this article, the perfectly inelastic collision used in conventional PSO is replaced by the perfectly elastic collision to improve the searching ability through reducing kinetic energy consumption. A stepped fitness function is defined to avoid the performance pit at a single-frequency point, and the concept “missing and returning” is introduced to solve the nonconvergence problem in simulation. Based on the improved SA-PSO algorithm, a broadband 10 W and a triband 6-W PA are designed. The broadband 10-W PA achieves an average drain efficiency (DE) of 62.5% and an output power of 41.2 dBm in the 0.8-3-GHz frequency band, respectively; the triband 6-W PA achieves an average of 57.4%/47.9%/47.3% DE and 37.7-/38.3-/37.4 dBm output power in 3.35-3.55-/5.75-5.95-/7.65-7.95-GHz frequency bands, respectively, while the gains of most stopbands reach less than 0 dB. With digital predistortion technology, the adjacent channel power ratio (ACPR) can reach less than -45 dBc.

18 August 2022 in IEEE Communications Surveys & Tutorials
Verified
Journal Article
Open access
MHMuhammad Furqan Haider
Muhammad Furqan Haider
FYFei You
Fei You
SHSongbai He
Songbai He
TRTimo Rahkonen
Timo Rahkonen
JAJanne Aikio
Janne Aikio
The next-generation (5G/6G) wireless communication aims to leapfrog the currently occupied sub-6 GHz spectrum to the wideband millimeter-wave (MMW) spectrum. However, MMW spectrums with high-order modulation schemes drive the power amplifier (PA) at significant back-off, causing severe nonlinear distortions, thus deteriorating the transceiver’s (TRXs) modulation process. Typically, the TRX efficacy is quantified with standardized linearization matrices, which take advantage of different predistortion (PD) schemes to handle deep compression of the PA. In this regard, TRX baseband signals are mostly linearized in the digital domain, where digitally controlled linearization needs higher sampling rates due to increasing MMW bandwidths to compensate for intermodulation (IMD) products, resulting in increased system cost and power consumption. Alternately, the digitally controlled analog-based linearization, i.e., the hybridization of digital predistortion (DPD) and analog predistortion (APD), is highly productive and cost-effective for fulfilling the linearized energy-efficient design vision of MMW networks. Therefore, this paper puts an extensive spotlight on the progress in PD-based linearization for 5G and beyond communications. It first provides background information on the advancements of PD schemes through recent surveys, then classifies the general roadmap of PD waveform processing across the TRX system models as preliminary. After this, we present three prominent PD architectures and their design approaches with intrinsic performance metrics. Finally, we explore four case studies encompassing PD operation under certain nonlinear constraints of different communication schemes. We examine the suitability of PD-based linearization solutions, both existing and proposed till the first quarter of 2022, and identify the potential prospects in this domain.

2 February 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
JPJingzhou Pang
Jingzhou Pang
CCChenhao Chu
Chenhao Chu
JWJiayan Wu
Jiayan Wu
ZDZhijiang Dai
Zhijiang Dai
MLMingyu Li
Mingyu Li
AZAnding Zhu
Anding Zhu
This article presents a broadband fully integrated Doherty power amplifier (DPA) using a continuous-mode combining load. It is illustrated that the continuous-mode impedance condition in back-off and saturation for Doherty operation can be achieved with a simple impedance inverter network (IIN) that can be realized using lumped components in gallium nitride (GaN) monolithic microwave integrated circuits (MMICs). A DPA was designed and fabricated using the 250-nm GaN process to validate the proposed architecture and design methodology. The fabricated DPA chip attains around 8 W saturated power from 4.1 to 5.6 GHz. About 38.5%–46.5% drain efficiencies are achieved at 6-dB output power back-off within the entire design band. When driven by a 100-MHz OFDM signal with 6.5-dB peak-to-average power ratio (PAPR), the proposed DPA achieves better than −45-dBc adjacent channel leakage ratio (ACLR) and higher than 38% average efficiency at 4.4 and 5.2 GHz after digital predistortion.

15 December 2017 in IEEE Access
Verified
Journal Article
Open access
CHChaoyi Huang
Chaoyi Huang
SHSongbai He
Songbai He
FYFei You
Fei You
This paper presents a symmetrical Doherty power amplifier (DPA) based on class-J mode for efficiency enhancement in a broad bandwidth. With a second harmonic suppression integrated into the output matching network of carrier power amplifier (PA) and peaking PA, respectively, the complex interaction of varying second harmonic impedances caused by dynamic load modulation can be eliminated and the second harmonic impedance remains the same reactance at both the output back-off (OBO) region and the saturated power. To meet the requirement of second harmonic termination, the DPA works in conventional class-J mode at the saturated power and a modified class-J continuum is proposed to expand the impedance design space at 8 dB OBO with good efficiency performance. A gallium nitride DPA is designed and fabricated to validate the method over a frequency band of 3.3-3.75 GHz. Under a 10%-duty-cycle pulse excitation, experimental results show the DPA delivers 48-48.8 dBm output power with a drain efficiency (DE) of 58%-71%. At 8 dB OBO, a measured DE of 44%-55% is achieved with a gain of 11.8-13.5 dB. When driven by a 2-carrier 40-MHz long-term evolution signal with a peak-to-average power ratio of 8 dB, the DPA exhibits an adjacent channel leakage ratio of -30 dBc at an average output power of 40.7 dBm at 3.45 GHz.

8 January 2018 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
CHChaoyi Huang
Chaoyi Huang
SHSongbai He
Songbai He
WSWeimin Yang Weimin Shi
Weimin Yang Weimin Shi
BSBin Song
Bin Song
The hybrid continuous modes are constituted by a continuum of power amplifier (PA) modes between class-J and continuous class-F. In this letter, a phase shift parameter is introduced in the voltage waveform formula of the hybrid continuous modes to generate complex fundamental and harmonic load impedances, leading to a further extension on the operation bandwidth. Based on the proposed theory, a gallium nitride PA is designed and fabricated over the frequency band of 1.2-3.6 GHz. The measured results show a 60%-72% drain efficiency at a saturated power of 40-42.2 dBm. In addition, when driven by a 20-MHz long-term evolution signal with a peak-to-average power ratio of 7.4 dB, the proposed PA obtains an adjacent channel leakage ratio of -35 dBc at an average output power of 35 dBm at 2.3 GHz.

9 April 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JWJinchen Wang
Jinchen Wang
SHSongbai He
Songbai He
FYFei You
Fei You
WSWeimin Yang Weimin Shi
Weimin Yang Weimin Shi
JPJun Peng
Jun Peng
CLChuan Li
Chuan Li
A method enabling the codesign of a high-efficiency power amplifier (PA) and a ring-resonator microstrip bandpass filter is proposed in this paper. Even-odd-mode analysis and a series of continuous modes (SCMs) are combined to realize broadband or multiband impedance matching as well as the suppression of undesired signals. The proposed codesign method can achieve both broadband and multiband frequency responses, and the designed component is relatively easy to analyze and fabricate due to its microstrip structure. For verification, a broadband and triband PA-filter components are designed and fabricated separately. The first component operates across 0.8-3.2 GHz (120%) with 39.7-42.9-dBm maximum output power and 57%-74% drain efficiency (DE). The second component, which has three passbands, covers several commercial frequencies with a measured output power of 39.6-41.3 dBm and DE from 62% to 68%. When these two components are driven by a 20-MHz long-term evolution signal with a peak-to-average power ratio of 6.2 dB, adjacent channel leakage ratios from -26.4 to -33.8 dBc and from -29.4 to -33.1 dBc are measured, respectively.