We have proposed a structure design of single-photon avalanche diode fabricated in the Taiwan Semiconductor Manufacturing Company Ltd. (TSMC) 0.18- $\mu \text{m}$ high-voltage (HV) CMOS technology, which improves the limited operating excess voltage for an n-on-p design without any other customized well layer. With the introduction of a deep p-well isolation (ISO) layer, the excess bias is significantly elevated, so that the device exhibits high photon detection probability (PDP) with relatively low dark count rate. The n-on-p-type device is favorable for 3-D-stacked backside illuminated structure and can attain high PDP at longer wavelength. With the improved jitter and after-pulsing probability, our designed device can be suitable for the application of light detection and ranging (LiDAR).
We present a practical design concept to reduce the noise of Ge-on-Si single photon avalanche diodes to improve temperature operation. In this letter, three different values of barrier height design have been investigated, and all devices exhibit ultra-low leakage current (<10 pA) and low noise-equivalent power (<10 fWHz -1/2 ). A high photon detection efficiency of 24.7 % and effective suppression of the dark count rate enable photon response at high temperatures up to 330 K with low and high barrier height designs, respectively. With our proposed structure design, the initial progress made by Ge-on-Si SPADs in overcoming challenges associated with low temperatures is underscored, emphasizing its potential in light detection and ranging applications across ambient and elevated temperatures.
We have proposed a structural design for a single photon avalanche diode with a low breakdown voltage. This diode is fabricated using Taiwan Semiconductor Manufacturing Company (TSMC) 0.18 μm HV CMOS technology, and it can maintain a high operating excess voltage in an n-on-p design without requiring any additional customized well layers. The n-on-p type device is particularly advantageous for a 3D-stacked backside illuminated structure and offers excellent photon detection capabilities at longer wavelengths. By incorporating a high doping concentration PDD well layer, we can significantly increase the excess bias, resulting in enhanced photon detection probability in the near-infrared wavelength range, all while maintaining a lower voltage due to a reduction in breakdown voltage. This design also leads to power consumption savings. As a result, our designed device is well-suited for consumer applications such as 3D image rendering and LiDAR technology.
27 October 2023 in IEEE Transactions on Instrumentation and Measurement
The sensitivity of a silicon photomultiplier (SiPM) can be enhanced to the level of single photon detection by combining the outputs of multiple single photon avalanche diode (SPAD) pixels. In this study, we utilized a pixel array consisting of 64x128 SPAD pixels that can switch and combine the outputs of multiple pixels to achieve a high detection dynamic range based on the photon power of the radiometric measurement scenario. Additionally, we accounted for the uncertainty associated with the dark count rate (DCR) in the theory calculation, which enabled us to extend the lowest detectable radiometric temperature to 225°C, matching the theoretical calculation. Moreover, we successfully maintained the capability of detecting the highest temperature at 1050°C, achieving a noise equivalent temperature difference (NETD) value below 1°C. Based on optical system modifications and calculation correction methods, our measurement results support that the SPAD image array is a much better radiometric sensor compared to CMOS sensors and CCD cameras.
We have demonstrated a wide radiation temperature measurement by using a single photon avalanche diode (SPAD) image array that is analogous to a Silicon Photomultiplier with a time-gating technique and an adjustable summed output. The detection temperature window ranging from 280 °C to 1050 °C can be achieved with a noise equivalent temperature difference value (NETD) below 1 °C. Thermal image with a high detection rate up to 1680 Hz is obtained at the same detection temperature with a commercial CMOS thermal camera. We further demonstrate a thermal image with a spatial resolution of 80 μm.
This Letter presents a novel on-chip afterpulsing characterization method demonstrated using gated-mode short-wave infrared single photon avalanche diode arrays, effectively overcoming the measurement limitations of conventional methods. Through this approach, we first achieve a comprehensive evaluation of the full-chip afterpulsing effect by adjusting the ratio between gated-on time and gated-off time and employing a sampling window technique. Experimentally validated using a room-temperature-operated 160 × 116 Ge-on-Si single photon avalanche diode array, the approach clearly reveals the potential pixel-to-pixel variations in afterpulsing behavior across SWIR single-photon avalanche diode arrays, highlighting the critical importance of full-chip evaluation for designing and optimizing gating period.