While hydrogen is regularly discussed as a possible option for storing regenerative energies, its low minimum ignition energy and broad range of explosive concentrations pose safety challenges regarding hydrogen storage, and there are also challenges related to hydrogen production and transport and at the point of use. A risk assessment of the whole hydrogen energy system is necessary to develop hydrogen utilization further. Here, we concentrate on the most important hydrogen storage technologies, especially high-pressure storage, liquid hydrogen in cryogenic tanks, methanol storage, and salt cavern storage. This review aims to study the most recent research results related to these storage techniques by describing typical sensors and explosion protection measures, thus allowing for a risk assessment of hydrogen storage through these technologies.
Photovoltaics (PV) is a key pillar of renewable energy supply. However, the climate and resource crisis make it necessary to implement further optimizations toward a circular economy in the PV industry. One strategy for saving resources and lowering carbon dioxide emissions is the reuse of modules (second-life PV). As part of this work, various tests were carried out with crystalline modules from two different manufacturers. The modules had already been transported to a recycling company and were originally intended for recycling. The measurements carried out provide a comprehensive assessment of the condition of the PV modules. In total, five different measurement methods were used, two of which related to short-term measurements under controlled laboratory conditions and three to long-term assessments under real conditions. The investigation illustrated that modules from the recycling company have potential for reuse. However, it also showed that a clearly differentiated classification system is necessary due to module age- and environmental conditions-related degradation. Qualification and further long-term measurements should be implemented using a combination of measurement methods.
Textiles are often used to protect people from cold environments. While most garments are designed for temperatures not far below 0 °C, very cold regions on the earth near the poles or on mountains necessitate special clothing. The same is true for homeless people who have few possibilities to warm up or workers in cooling chambers and other cold environments. Passive insulating clothing, however, can only retain body heat. Active heating, on the other hand, necessitates energy, e.g., by batteries, which are usually relatively heavy and have to be recharged regularly. This review gives an overview of energy-self-sufficient textile solutions for cold environments, including energy harvesting by textile-based or textile-integrated solar cells; piezoelectric sensors in shoes and other possibilities; energy storage in supercapacitors or batteries; and heating by electric energy or phase-change materials.
The development of resource-efficient products based on a comprehensive assessment of the R-principles is becoming increasingly important in the context of the Eco-Design Regulation. However, there is no basis for assessing c-Si photovoltaic modules in the context of REpair, REfurbish, and REmanufacture. The aim of this study is therefore to create an assessment basis including a definition framework and a selection of priority parts. The results are a basic functional and structural analysis, an initial catalog of criteria for a semi-quantitative assessment method, and a weighting of priority parts. It becomes clear that individual cells and connection components are particularly relevant for REpair and REfurbish. For REmanufacture, attention should be paid to the entirety of the cells, the frame, and the glass. Overall, a method is created that, in application, lays the foundation for a sustainable product design of photovoltaic modules improved for the circular economy and can be further optimized.