The Bi1.5MgNb1.5O7 thin films with cubic pyrochlore structure were prepared onto Pt-coated sapphire substrates by rf magnetron sputtering deposition from a stoichiometric target. Dielectric measurements indicated that the Bi1.5MgNb1.5O7 thin films exhibited low dielectric loss of ∼0.0018–0.004, medium dielectric constant of ∼86, and superior tunable dielectric properties at room temperature. A bias field of 1.6 MV/cm resulted in the maximum voltage tunability of 39%. A brief discussion is given on the enhanced tunability compared to Bi1.5ZnNb1.5O7 thin films. The low loss and superior tunability make Bi1.5MgNb1.5O7 thin films promising for potential tunable capacitor applications.
Flexible temperature sensors are needed for real‐time temperature monitoring in healthcare, disease diagnosis, and ambient environment detection. In this work, a flexible negative temperature coefficient (NTC) temperature sensor based on polyvinyl chloride/carbon black (PVC/CB) was screen printed onto a polyethylene terephthalate substrate. The prepared temperature sensor exhibited high sensitivity (−0.148% °C −1 ), excellent linearity ( R2 = 0.995), a fast response time (0.7 s), and good repeatability when used to measure temperatures between 18 °C and 44 °C. The tunneling effect was used to explain the NTC of the PVC/CB temperature sensor, and its temperature sensing mechanism was proposed. Additionally, the sensor was used to monitor human breathing rates and temperatures, demonstrating its potential for real‐time skin or environmental temperature monitoring.
Due to their small size, extremely fast response, and low cost, refractory metallic thin film thermocouples (TFTCs) are well suited for the surface temperature measurement of hot components. In this study, PtRh films with different amounts of Rhodium (10% and 13%) were deposited with direct current magnetron sputtering and annealed at different temperatures in air. The chemistry, microstructure, and resistivity of the films were investigated. Type S (Pt10%Rh-Pt) and type R (Pt13%Rh-Pt) TFTC were fabricated on alumina substrates. Rhodium segregation at the surface of PtRh film was observed, and the variation of the thermoelectric properties of TFTCs was discussed based on the chemistry and microstructure of PtRh films.