This review focuses on the use of a sulfonated pentablock copolymer commercialized as NexarTM in water purification applications. The properties and the use of sulfonated copolymers, in general, and of NexarTM, in particular, are described within a brief reference focusing on the problem of different water contaminants, purification technologies, and the use of nanomaterials and nanocomposites for water treatment. In addition to desalination and pervaporation processes, adsorption and photocatalytic processes are also considered here. The reported results confirm the possibility of using NexarTM as a matrix for embedded nanoparticles, exploiting their performance in adsorption and photocatalytic processes and preventing their dispersion in the environment. Furthermore, the reported antimicrobial and antibiofouling properties of NexarTM make it a promising material for achieving active coatings that are able to enhance commercial filter lifetime and performance. The coated filters show selective and efficient removal of cationic contaminants in filtration processes, which is not observed with a bare commercial filter. The UV surface treatment and/or the addition of nanostructures such as graphene oxide (GO) flakes confer NexarTM with coating additional functionalities and activity. Finally, other application fields of this polymer are reported, i.e., energy and/or gas separation, suggesting its possible use as an efficient and economical alternative to the more well-known Nafion polymer.
Nowadays, nitrate ions and azo dyes are a significant source of water pollution due to their high toxicity, persistence, and potential to be carcinogenic. Both contaminants are the result of anthropogenic sources, such as sewage or industrial wastewater discharge; the first one results also as a consequence of the intensive use of fertilizers. In this work we report the use of a new quaternized pentablock copolymer (PTBr) for the removal of nitrate ions and methyl orange (MO) dye from water by adsorption processes. Morphological, chemical, and thermal properties of the pentablock copolymer were investigated, respectively, by scanning electron microscopy (SEM), Attenuated Total Reflectance Infrared Spectroscopy (ATR-FTIR) (FT-IR), and X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC) analyses. Anionic removal ability and adsorption rate in water solutions containing either a single contaminant species or a mix of the two contaminants were studied by UV–VIS absorbance spectroscopy as a function of time and initial concentration. The presence of imidazole groups confers on PTBr a positive charge and a hydrophilic character that are responsible for an effective removal of anions from water. PTBr film reports an adsorption efficiency of 10.15 mg/g for nitrate removal and this value is in line with others reported in the literature. In the case of the simultaneous presence of nitrate and MO, it is found that nitrate ions removal is slightly affected by the presence of the dye, since both contaminants compete for electrostatic interaction with imidazole groups. On the contrary, the dye removal does not show significant change with or without the presence of nitrate ions, probably due to other kinds of interaction that it can establish with the polymer surface (π-π interaction). The adsorption process and the related mechanisms are described using kinetic and isothermal models. Despite a certain reduction in the adsorption efficiency for one of the investigated contaminants, the results confirm the possibility of using the quaternized pentablock copolymer for the co-adsorption of both inorganic and organic anions.
The presence of ciprofloxacin antibiotic in water is a threat to humans and aquatic life since antibiotics are currently regarded as emerging contaminants of major concern. This work reported the use of NexarTM film, a sulfonated pentablock copolymer, to effectively remove ciprofloxacin antibiotic from water in a sustainable approach. The removal efficiency of Nexar film was evaluated in aqueous or salty (NaCl 0.5 M) ciprofloxacin solutions as a function of contact time and the initial ciprofloxacin concentration. In the investigated conditions, the polymeric film totally removed ciprofloxacin in MilliQ solution while its removal efficiency in salty solution was approximately 73%. This lower value is due to the presence of Na+ ions that compete with antibiotic molecules for adsorption on active surface sites of the polymeric film. No further release of adsorbed antibiotic molecules occurred. The kinetic studies, conducted for ciprofloxacin adsorption on Nexar film in both MilliQ and salty solutions, revealed that the overall sorption process is controlled by the rate of surface reaction between ciprofloxacin molecules and active sites on Nexar surface. Furthermore, at equilibrium conditions, the isotherm model that best fits experimental parameters was not linear. This indicates that the competition between the solute and the solvent for binding sites on the adsorbent should be considered to describe adsorption processes in both MilliQ and salty solutions.
Antibiotic residues in aquatic environments require sensing approaches that are not only analytically effective but also compatible with aqueous fabrication and reusable after regeneration. Here, we report a ciprofloxacin (CIP) electrochemical sensor based on commercial carbon screen-printed electrodes modified with carbon nanotubes (CNTs) and halloysite nanotubes (HTs). The modifier is prepared and deposited entirely from aqueous dispersions: CNTs provide conductive pathways, whereas naturally occurring halloysite supplies an inexpensive adsorptive phase that may favor local analyte adsorption. The optimized sensing layer exhibited a mean sensitivity of over the – calibration range, with a relative standard deviation of across three independently fabricated electrodes. An estimated limit of detection (LOD) of approximately 34 nM was calculated from the blank signal variability and calibration sensitivity. Measurements were intentionally performed at pH 7.0, representative of near-neutral aquatic matrices and avoiding acidification pretreatment. Although mildly acidic conditions may further favor CIP adsorption, the neutral-pH workflow provides a conservative and more sustainability-oriented assessment. Following sensing, a UVA-assisted cleaning treatment reduced the residual CIP-related signal and enabled subsequent electrode reuse. The regenerated electrode retained approximately 82.4% of its initial sensitivity in the investigated lower concentration interval (4.2–17 M), demonstrating substantial recovery of its analytical response after UVA treatment.
The Oxygen Evolution Reaction (OER) is the bottleneck in the water splitting reaction since it involves four intermediate steps, constituting the adsorption–desorption of oxygen-based radical groups, and not all of them are energetically favorable. Rapidly growing research interest is focusing on carbon-based materials as novel, highly active and durable non-precious electrocatalysts for the OER, representing a valuable alternative to precious and rare materials with electrochemical properties tuned by defect creation. In this work, we propose a facile and green methodology based on the modification of graphene oxide by laser irradiation to obtain an alternative OER catalyst. GO flakes were chemically and physically modified using pulsed laser irradiation at with fluences of and . Different analyses were carried out to correlate the electrochemical performance with the structural, optical, and morphological properties; after that, we correlated the improvements in the OER with respect to the pristine GO with the increase in OH functional groups obtained by laser treatment. The best-performing sample exhibited an overpotential of , comparable to that of catalysts reported in the literature but with the advantage of not being a precious or rare material.