Azat K. Nurkassimov

Mr. Azat K. Nurkassimov

Park of nuclear technologies JSC, Kurchatov, Kazakhstan
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 June 2024 in Membranes
Verified
Journal Article
Open access
PDF file
ASAigerim Shakayeva
Aigerim Shakayeva
AYArman B. Yeszhanov
Arman B. Yeszhanov
ABAlexander N. Borissenko
Alexander N. Borissenko
MKMurat T. Kassymzhanov
Murat T. Kassymzhanov
AZAinash T. Zhumazhanova
Ainash T. Zhumazhanova
IKIlya Korolkov
Ilya Korolkov
In this work, the surfaces of poly (ethylene terephthalate) track-etched membranes (PET TeMs) with pore sizes of 670–1310 nm were hydrophobized with 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl acrylate (DFHA) by photoinitiated graft polymerization. Attenuated total reflection FTIR spectroscopy (ATR-FTIR), scanning electron microscopy (SEM) coupled to an energy-dispersive X-ray spectrometer (EDX), and contact angle measurements were used to identify and characterize the TeMs. The optimal parameters for graft polymerization were determined as follows: polymerization time of 60 min, monomer concentration of 30%, and distance from the UV source of 7 cm. The water contact angle of the modified membranes reached 97°, which is 51° for pristine membranes. The modified membranes were tested for water desalination using direct contact membrane distillation (DCMD) method. The effects of membrane pore size, the degree of grafting, and salt concentration on the performance of membrane distillation process were investigated. According to the results obtained, it has been concluded that large pore size hydrophobic TeMs modified by using DFHA could be used for desalinating water.

31 May 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
ASAigerim Shakayeva
Aigerim Shakayeva
AYArman B. Yeszhanov
Arman B. Yeszhanov
ABAlexander N. Borissenko
Alexander N. Borissenko
MKMurat T. Kassymzhanov
Murat T. Kassymzhanov
AZAinash Zhumazhanova
Ainash Zhumazhanova
IKIlya Korolkov
Ilya Korolkov
In this work, the surface of poly(ethylene terephthalate) track-etched membranes (PET TeMs) with pore sizes of 670-1310 nm was hydrophobized with 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl acrylate (DFHA) by photoinitiated graft polymerization. Attenuated total reflection FTIR spec-troscopy (ATR-FTIR), scanning electron microscopy (SEM) coupled to an energy-dispersive X-ray spectrometer (EDX), and contact angle measurement were used to identify and characterize the TeMs. The optimal parameters for graft polymerization were determined as follows: polymeriza-tion time 60 min, monomer concentration of 30% and distance from the UV-source 7 cm. The wa-ter contact angle of the modified membranes reached 97° which is 51o for pristine membranes. The modified membranes were tested for water desalination using direct contact membrane distillation (DCMD) method. The effect of membrane pore size, the degree of grafting and salt concentration on the performance of membrane distillation process was investigated. According to the results obtained, it has been concluded that large pore size hydrophobic TeMs modified by using DFHA could be used for desalinating water.

1 April 2026 in Kazakhstan journal for oil & gas industry
Verified
Journal Article
Open access
GSGaini Seitenova
Gaini Seitenova
ASAyazhan G. Syzdyk
Ayazhan G. Syzdyk
RDRizagul Dyussova
Rizagul Dyussova
ZBZhanat A Baigazinov
Zhanat A Baigazinov
ANAzat K. Nurkassimov
Azat K. Nurkassimov
MKMarat T. Kassymzhanov
Marat T. Kassymzhanov
Background: Foamed polyethylene is widely used in construction and in the oil and gas industry as a thermal and acoustic insulation material. Its popularity stems from low thermal conductivity, moisture resistance, and chemical stability. However, its durability and long-term performance remain limited. Radiation crosslinking provides an effective modification method by creating a three-dimensional polymer network and improving resistance to degradation. Aim: This study examines the effects of electron beam dose and gas atmosphere (air, argon, nitrogen) on the crosslinking degree of polyethylenes used in construction and oil and gas insulation. Materials and methods: Polyethylene samples irradiated with electron beams at doses of 75, 125, and 175 kGy in three atmospheres: air, argon, and nitrogen. Crosslinking was evaluated through gel fraction analysis following GOST R 59112–2020. Structural changes were characterized by FTIR spectroscopy using Infralum FT-08 (Russia) and Shimadzu IR Spirit (Japan). Results: Maximum crosslinking was observed at 125 kGy. Irradiation in inert atmospheres (argon and nitrogen) yielded higher gel fractions than in air, where degradation processes predominated. findings confirm a direct correlation between irradiation conditions and the structural stability of polyethylene. Conclusion: Radiation crosslinking significantly improves the performance of polyethylene by enhancing its thermal, chemical, and mechanical resistance. This approach can be recommended for producing long-lasting insulation and protective materials in both construction and oil and gas applications.