Gasification technology enables the clean and efficient utilization of coal. However, the process generates a significant amount of solid waste—coal gasification slag. This paper focuses on the Jinhua furnace coal gasification slag (fine slag, FS; coarse slag, CS) as the research subject, analyzing its composition and structural characteristics, and discussing the thermochemical conversion performance of both under different atmospheres (N2 and air). The results show that the fixed carbon content in FS is as high as 35.82%, while it is only 1% in CS. FS has a large number of fluffy porous carbon on its surface, which wraps around or embeds into smooth and variously sized spherical inorganic components, with a specific surface area as high as 353 m2/g, and the pore structure is mainly mesoporous. Compared to the raw coal (TYC), the types of organic functional groups in FS and CS are significantly reduced, and the graphitization degree of the carbon elements in FS is higher. The ash in FS is mainly amorphous and glassy, while in CS, it mainly has crystalline structures. The weight loss rates of TYC and FS under an inert atmosphere are 27.49% and 10.38%, respectively; under an air atmosphere, the weight loss rates of TYC and FS are 81.69% and 44.40%, respectively. Based on the analysis of the thermal stability of FS and its high specific surface area, this paper suggests that FS can be used to prepare high-value-added products such as porous carbon or high-temperature-resistant carbon materials through the method of carbon–ash separation.
Vacuum residue (VR) is one of the more difficult heavy fractions to process in petroleum refining, and the development of clean utilization technologies for vacuum residue has become a major research focus in the petrochemical industry. This paper discusses the compositional and structural characteristics of vacuum residue from Karamay (KVR) using methods such as ultimate analysis, FTIR, and TG-DTG. The thermal gravimetric kinetics analysis was conducted based on TG-DTG curves at different heating rates. Ultimate analysis revealed that KVR has a high H/C atomic ratio (1.84), and combined with the strong peaks at 2920 cm−1 and 2850 cm−1 in its infrared spectrum, it indicates that KVR is mainly composed of aliphatic compounds, with aromatic compounds being relatively few. High-temperature simulated distillation showed that KVR had a broad boiling-range distribution, with the temperature corresponding to a cumulative recovery of 86.4% exceeding 720 °C, indicating the presence of a certain proportion of ultra-high-boiling components in KVR. The Coats–Redfern kinetic model shows significant variations in activation energy (Ea) at different temperature ranges and reaction orders. Kinetic studies using non-model methods show smaller differences in Ea derived from four different non-model methods. Overall, KVR’s pyrolysis process is complex, with Ea ranging between 100 and 300 kJ/mol.