Chao Yin

Chao Yin


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
YLYanqing Li
Yanqing Li
ZZZiming Zhang
Ziming Zhang
JCJunyi Cheng
Junyi Cheng
ZLZhaofeng Liu
Zhaofeng Liu
CYChao Yin
Chao Yin
JGJianzheng Guo
Jianzheng Guo
Regulating the microstructure of powder metallurgy (P/M) nickel-based superalloys to achieve superior mechanical properties through heat treatment is a prevalent method in turbine disk design. However, in the case of dual-performance turbine disks, the complexity and non-uniformity of the heat treatment process present substantial challenges. The prediction of yield strength is typically derived from the analysis of microstructures under various heat treatment regimes. This method is time-consuming, expensive, and the accuracy often depends on the precision of microstructural characterization. This study successfully employed a coupled method of Artificial Neural Network (ANN) and finite element analysis (FEA) to reveal the relationship between the heat treatment process and yield strength. The coupled method accurately predicted the location specified and temperature-dependent yield strength based on the heat treatment parameters such as holding temperatures and cooling rates. The root mean square error (RMSE) and mean absolute percentage deviation (MAPD) for the training set are 50.37 and 3.77, respectively, while, for the testing set, they are 50.13 and 3.71, respectively. Furthermore, an integrated model of FEA and ANN is established using a Abaqus user subroutine. The integrated model can predict the yield strength based on temperature calculation results and automatically update material properties of the FEA model during the loading process simulation. This allows for an accurate calculation of the stress–strain state of the turbine disk during actual working conditions, aiding in locating areas of stress concentration, plastic deformation, and other critical regions, and provides a novel reliable reference for the rapid design of the turbine disk.

23 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
JXJiangying Xiong
Jiangying Xiong
CYChao Yin
Chao Yin
CWChong Wang
Chong Wang
GFGanjiang Feng
Ganjiang Feng
JGJianzheng Guo
Jianzheng Guo
This study investigates the microstructural evolution and its effect on the fatigue performance of a novel nickel-based powder superalloy FGH4113A (WZ-A3) after long-term aging at 760 °C and 815 °C. The results show that long-term aging both at 760 °C and 815 °C has no significant effect on the grain size and morphology of the alloy. After aging at 760 °C for up to 2020 h, the size of the γ′ phase remains unchanged, and its morphology transitions from nearly square to nearly spherical. During long-term aging at 815 °C for 440 h, γ′ phase coarsening and spheroidizing occur simultaneously. With prolonged aging time, the size and spheroidization degree of the γ′ phase further increase. During long-term aging up to 440 h at 760 °C, the dispersed granular MC and M6C carbides dissolve and re-precipitate. By 2020 h of aging, flocculent carbides precipitate and non-continuous M6C and M23C6 accumulate at grain boundaries. After long-term aging at 815 °C for 440 h, flocculent carbides begin to precipitate within the grains. By 2020 h of aging, a large amount of flocculent carbides precipitate with significant coarsening and enrichment of the grain boundary carbides. Due to the insignificant coarsening of the γ′ phase as well as the enrichment and precipitation of the grain boundary carbides, the fatigue performance of the alloy decreases slightly after long-term aging.

25 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
JXJiangying Xiong
Jiangying Xiong
CYChao Yin
Chao Yin
ALAnping Long
Anping Long
JCJunyi Cheng
Junyi Cheng
GFGanjiang Feng
Ganjiang Feng
JGJianzheng Guo
Jianzheng Guo
A novel nickel-based powder metallurgy superalloy was processed using two different thermal–mechanical processes, including hot isostatic pressed (As-HIP) and hipped + hot extruded + isothermally-forged (IF) heat treatments following two processed alloys, designated as As-HIP-HT and IF-HT. The objective of this study is to investigate the microstructure and mechanical property evolution in a nickel-based powder disk alloy fabricated by two processes. The findings revealed that both As-HIP and IF alloys underwent substantial recrystallization, with grains in the IF alloy being finer. Notable Prior Particle Boundaries (PPBs) were identified in the As-HIP samples. The IF-HT alloy exhibited a larger grain size due to a greater amount of stored energy. Significant differences in the secondary γ′ precipitates were observed between the two processes. More uniform substructures in the IF-HT alloy led to a higher density of finer γ′ precipitates. At temperatures of 704 °C and 760 °C, the As-HIP-HT alloy displayed a higher yield strength, but its plasticity significantly declined as temperature increased, while the IF-HT alloy showed a relatively stable plasticity. The presence of PPBs in the As-HIP-HT alloy minimally affected the alloy’s strength but reduced its plasticity. The creep property of the two processes was compared at 800 °C/330 MPa; the IF-HT alloy demonstrated lower creep rates and a longer creep life, which was attributed to its finer γ′ precipitates. Dominant creep deformation mechanisms in the As-HIP-HT alloy included Orowan dislocation loops and deformation twinning, while the primary mechanisms in the IF-HT alloy involved dislocation cutting through γ′ precipitates, dislocation slip, and micro-twins. These findings support the use of isostatic pressing + hot extrusion+ isothermally-forging process for critical high-temperature components.