Hydroxyapatite is a calcium phosphate intensively proposed as a bone substitution material because of its resemblance to the constituents of minerals present in natural bone. Since hydroxyapatite’s properties are mainly adequate for nonload bearing applications, different solutions are being tested for improving these properties and upgrading them near the target values of natural bone. On the other hand, starch (a natural and biodegradable polymer) and its blends with other polymers have been proposed as constituents in hydroxyapatite mixtures due to the adhesive, gelling, and swelling abilities of starch particles, useful in preparing well dispersed suspensions and consolidated ceramic bodies. This article presents the perspectives of incorporating starch and starch blends in hydroxyapatite materials. Based on the role of starch within the materials, the review covers its use as (i) a polymeric matrix in hydroxyapatite composites used as adhesives, bone cements, bone waxes, drug-delivery devices or scaffolds and (ii) a sacrificial binder for fabrication of porous hydroxyapatite scaffolds. The suitability of these materials for bone reconstruction has becomes a reachable aim considering the recent advancements in ceramic fabrication and the current possibilities of controlling the processing parameters.
17 February 2016 in ACS Sustainable Chemistry & Engineering
Green biobased polymeric membranes are rapidly emerging as materials of choice for a number of biomedical applications. In this work, we report our preliminary studies on the covalent immobilization of sericinon to green cellulose membranes for potential biomedical applications such as in the osseointegration field. Initially, the surface of the cellulose acetate membrane was immobilized with the amino-propyl-triethoxysilane (APTS) functional group, while the protein was immobilized through glutaraldehyde that was used as a linker between amino-propyl-triethoxysilane and sericin. The functionalized membranes were thoroughly characterized by different characterization techniques such as infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA/DTG). All these techniques confirmed the successful functionalization and uniform immobilization of the protein onto the membrane surface. Subsequently, the performance of the membranes was characterized both in terms of flows and retention of bovine serum albumin and hemoglobin in the case of immobilized protein membranes. The retention was found to bemore than 90% after 90 min of process. Since, in these membranes cases, the speed of degradation is essential in the physiological pH conditions, it was also studied over a period of three months, and the degradation mechanism is also explained. Furthermore, the membrane functionalized with sericin has proven to hold great promise for application in bone regeneration.
This article presents a facile synthesis method used to obtain new composite films based on polylactic acid and micro-structured hydroxyapatite particles. The composite films were synthesized starting from a polymeric solution in chloroform (12 wt.%) in which various concentrations of hydroxyapatite (1, 2, and 4 wt.% related to polymer) were homogenously dispersed using ultrasonication followed by solvent evaporation. The synthesized composite films were morphologically (through SEM and atomic force microscopy (AFM)) and structurally (through FT-IR and Raman spectroscopy) characterized. The thermal behavior of the composite films was also determined. The SEM and AFM analyses showed the presence of micro-structured hydroxyapatite particles in the film’s structure, as well as changes in the surface morphology. There was a significant decrease in the crystallinity of the composite films compared to the pure polymer, this being explained by a decrease in the arrangement of the polymer chains and a concurrent increase in the degree of their clutter. The presence of hydroxyapatite crystals did not have a significant influence on the degradation temperature of the composite film.