In this study, we examined the cyclic stability of Prussian blue (PB) films in electrolytes with acid. The cyclic stabilities of the PB films were investigated in K⁺ based electrolytes with different values of solution pH. The acidified KCl solution can significantly improve the durability of the film. Among the three pH values tested, the KCl solutions (pH = 2.15 and pH = 3.03) showed better performance. Furthermore, we investigated the cyclic stabilities of the PB films in LiClO₄/PC electrolyte containing different acids. We found that the cyclic stability of PB film was significantly improved when a small amount of acetic acid was dissolved in LiClO₄/PC electrolyte. The PB film exhibited stable optical modulation after up to 20,000 cycles in LiClO₄/PC electrolyte containing acetic acid—a much higher result than those of some literatures. This suggests that the addition of acetic acid to LiClO₄/PC electrolyte can promote the development of PB-based devices with improved stability.

In the current highly industrialized living environment, air quality has become an increasing public health concern. Natural environments like forests have excellent air quality due to high concentrations of negative oxygen ions originating from low-voltage ionization, without harmful ozone. Traditional negative oxygen ion generators require high voltage for corona discharge to produce ions. However, high voltage can increase electron collisions and excitations, leading to more dissociation and recombination of oxygen molecules and consequently higher ozone production. To address the challenge of generating negative oxygen ions without accompanying ozone production, this study designed and constructed a low-voltage negative oxygen ion generator based on nanometer-tip carbon fiber electrodes. The advantage of this device lies in the high curvature radius of carbon fibers, which provides high local electric field strength. This allows for efficient production of negative oxygen ions at low operating voltages without generating ozone. Experiments demonstrated that the device can efficiently generate negative oxygen ions at a working voltage as low as 2.16 kV, 28% lower than the lowest voltage reported in similar studies. The purification device manufactured in this study had a total decay constant for PM_2.5 purification of 0.8967 min⁻¹ within five minutes, compared to a natural decay constant of only 0.0438 min⁻¹, resulting in a calculated Clean Air Delivery Rate (CADR) of 0.1535 m³/min. Within half an hour, concentrations of PM_2.5, PM₁, PM₁₀, formaldehyde, and TVOC were reduced by 99.09%, 99.40%, 99.37%, 94.39%, and 99.35%, respectively, demonstrating good decay constants and CADR. These findings confirm its effectiveness in improving indoor air quality, highlighting its significant application value in air purification.

Advances in radar technology have driven efforts to develop effective countermeasures. Plasma is recognized as a highly effective medium for absorbing electromagnetic waves. Recent research has focused on enhancing plasma element performance. This paper achieved ultra-high-density, low-pressure cold plasma with a density of 1.15 × 10¹² cm⁻³, surpassing similar studies by more than an order of magnitude. Tungsten electrodes with high-curvature spiked structures were invented to replace traditional iron–nickel alloy electrodes, increasing plasma density by 88.2% under the same conditions. Lightweight and cost-effective tubular and annular ultra-high-density, low-pressure cold plasma devices were developed, demonstrating exceptional performance in electromagnetic wave absorption, plasma transient antennas, and radar stealth technology. The influence of plasma on electromagnetic waves and its numerical relationship were analyzed. By measuring the radar cross-section (RCS), the reduction in radar detection rates was quantified. The results show that the ultra-high-density cold plasma devices exhibit very low intrinsic RCS values, suitable for plasma antenna applications. The array of plasma elements generates a large-area high-density low-pressure cold plasma. This plasma effectively reduces the radar cross-section (RCS) of metallic equipment in the S and C bands and shows attenuation in the X band. These effects highlight the superior characteristics of plasma technology in electronic warfare. This exploratory research lays the groundwork for further defense applications.