Aging during construction and in-service substantially changes the chemical composition and physical properties of bitumen thereof influences the performance of asphalt pavements. The modification of bitumen by crumb rubber modifier (CRM) significantly increases the complexity of the aging mechanism and is expected to improve the aging resistance of bitumen. This study aims to investigate the effects of laboratory short-term and long-term aging on the chemistry and rheology of crumb rubber modified bitumen (CRMB). Neat bitumen and CRMB with four different CRM contents were studied. Fourier transform infrared spectroscopy and dynamic shear rheometer were employed to measure the change in the chemical composition and rheological properties of binders at different aging states. Bitumen hardening, which was rheologically revealed by the frequency sweep and multiple creep recovery test results, was also reflected in the growth of carbonyl and sulfoxide functional groups. In addition, the aliphaticity and aromaticity indices of binders before and after aging were also investigated. CRMB binders showed improved aging resistance compared to neat bitumen as reflected by the decreased carbonyl and sulfoxide indices as well as the lower change in rheological parameters. Higher resistance against aging was achieved when increasing the CRM content. The results also highlight the correlation between chemistry and rheology of bitumen. Among six selected mechanical parameters of binder, the non-recoverable creep compliance and percent recovery show better correlations with the combined chemical aging index (sum of carbonyl and sulfoxide indices) than the parameters derived from the linear viscoelastic region.

Waste tire rubber has been incorporated into asphalt modification for decades due to its various benefits. There are two main mechanisms during bitumen–rubber interaction: rubber swelling and chemical degradation. This study surveys these two processes from the viewpoint of polymer science. The kinetics of rubber dissolution and thermodynamics of rubber swelling are discussed to provide a fundamental understanding of the interaction process and to demonstrate how optimisation of material selection and processing procedures can lead to the desired binder properties. Factors including the interaction conditions and raw material characteristics are analysed based on the previous theories and compared with experimental results.

The microstructure and chemical composition of asphalt binders have a significant effect on their rheological properties and, therefore, their performance as road paving binders. This study aims to investigate the effects of warm-mix asphalt (WMA) additives, organic type and chemical type, on the rheological properties and chemical internal structure of base asphalt and crumb rubber modified asphalt (CRMA). A set of dynamic shear rheometer (DSR) tests was conducted to obtain the rheological parameters (e.g., complex viscosity, complex modulus, phase angle) of asphalt binders. The flow activation energy was calculated from Arrhenius equation based on viscosity data to rank the thermal susceptibility. Black diagrams and master curves of complex modulus and phase angle were utilized to analyze the rheological properties. The molecular weight distributions of asphalt binders were inverted from the phase angle master curve to evaluate the molecular weight characteristics. It was found that the the addition of crumb rubber into base asphalt improves the rheological properties of enhanced modulus and elasticity. Organic and chemical types of WMA additives have different chemo-physical effects on both base asphalt and CRMA. Phase angle inversion method provides a powerful tool to monitor the molecular structure change and, therefore, the chemo-physical interactions of asphalt binders induced by modifications. Finally, there is a good correlation between flow activation energy and molecular weight.