Qikai Sun

Mr. Qikai Sun

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

6 October 2022 in International Journal of Rail Transportation
Verified
Journal Article
Closed access
Xiao LiuXiao Liu
Xiao Liu
Nan ZhangNan Zhang
Nan Zhang
Qikai SunQikai Sun
Qikai Sun
ZWzhaozhi wu
zhaozhi wu
This paper adopts a proficient approach to evaluate vibration and structure-borne noise and makes up for the steel-concrete composite (SCC) box girder vacancy in the SCC structure. First, the dynamic equation of the train-rail system is established, the pseudo-response of the system in the frequency domain is appropriately assessed by pseudo excitation method (PEM), and the frequency spectra of the wheel-rail force as well as the forces transmitted to the bridge are obtained. Next, applying the force to the finite element method (FEM), boundary element method (BEM), and statistical energy analysis (SEA) model. The vibration and structure-borne noise of the SCC box girder are calculated in the frequency domain. Then, the effectiveness of the method and model is verified through the comparison of the field experimental results. Finally, the effect of the ground reflection in the SEA model is considered using the sound ray-tracing method for the first time.

15 January 2021 in Journal of Advanced Transportation
Verified
Journal Article
Open access
PDF file
ZWZhangming Wang
Zhangming Wang
Nan ZhangNan Zhang
Nan Zhang
XDXian Ting Du
Xian Ting Du
SWShilei Wang
Shilei Wang
Qikai SunQikai Sun
Qikai Sun
In cable-stayed bridges, especially asymmetric bridges, counterweights are always made to work together with cable pretension forces to get a reasonable finished state. To solve the optimization problem of the cable-stayed bridge considering the counterweights, the integrated optimization method (IOM) for estimating cable forces and counterweights is proposed. In this method, the counterweights are proposed to act on the anchor points. After that, the summary of the minimum weighted total bending energy and the summary of the counterweights are considered as two objective functions of a multiobjective problem. Finally, the dynamic weighted coefficient method is used to solve this problem and realize the Pareto solution set. IOM presents detailed procedures in a simple numerical model and is then applied to the Yong-ding special-shaped cable-stayed bridge. The results show that not only IOM can realize the priority selection of the loading position of the counterweights but also get a better reasonable finish state because of the introduction of the counterweight dimension; the dynamic weighted coefficient method can quickly find the Pareto optimal solution set and be further screened by decision-makers; counterweight is very helpful to reduce torsion and other spatial effects in cable-stayed bridges. IOM can be used as a universal optimization method for cable-stayed bridges.

1 January 2021 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
ZCZenong Cheng
Zenong Cheng
Nan ZhangNan Zhang
Nan Zhang
Qikai SunQikai Sun
Qikai Sun
ZSZeguo Shen
Zeguo Shen
Xiao LiuXiao Liu
Xiao Liu
A modified moving loads’ model is proposed for the vehicle‐bridge coupling vibration simulation. Taking the vehicle‐bridge interaction model (VBI) as the reference, the accuracy and applicability of the three calculation models, namely, moving loads’ model, moving mass model, and spring‐damper‐mass model, are compared using the frequently‐used railway simply‐supported beam with a span of 32 meters as the research object. Influencing factors such as vehicle speed, mass ratio of vehicle and beam, and primary spring stiffness on the dynamic response of the vehicle‐bridge system are discussed in detail. The results show that the moving load model has the best performance on the stability of the deviation rate, but its calculation results are smaller than the other two methods as well as the VBI. The values of the deviation rate for the moving mass model and the spring‐damper‐mass model are large, and the stability of those are insufficient in the range of 80%∼120% of the first resonance velocity. Except for that, the results of the two models are in good agreement with the VBI model. According to above analysis, a modified moving loads’ model with two amplification coefficients, namely, 1.10 for the range of 90%∼105% of the first resonance velocity and 1.05 for other velocities, are proposed, which has higher calculation efficiency and accuracy.

29 July 2022 in International Journal of Structural Stability and Dynamics
Verified
Journal Article
Closed access
PDF file
Qikai SunQikai Sun
Qikai Sun
Nan ZhangNan Zhang
Nan Zhang
XLXiao Liu
Xiao Liu
ZCZenong Cheng
Zenong Cheng

23 November 2023 in International Journal of Structural Stability and Dynamics
Verified
Journal Article
Closed access
YLYahao Li
Yahao Li
Nan ZhangNan Zhang
Nan Zhang
Qikai SunQikai Sun
Qikai Sun
CCChaoxun Cai
Chaoxun Cai
KLKebing Li
Kebing Li