Xiao Liu

Prof. Xiao Liu

Liaoning Technical University, Fuxin, Liaoning, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

6 October 2022 in International Journal of Rail Transportation
Verified
Journal Article
Closed access
Xiao LiuXiao Liu
Xiao Liu
Nan ZhangNan Zhang
Nan Zhang
Qikai SunQikai Sun
Qikai Sun
ZWzhaozhi wu
zhaozhi wu
This paper adopts a proficient approach to evaluate vibration and structure-borne noise and makes up for the steel-concrete composite (SCC) box girder vacancy in the SCC structure. First, the dynamic equation of the train-rail system is established, the pseudo-response of the system in the frequency domain is appropriately assessed by pseudo excitation method (PEM), and the frequency spectra of the wheel-rail force as well as the forces transmitted to the bridge are obtained. Next, applying the force to the finite element method (FEM), boundary element method (BEM), and statistical energy analysis (SEA) model. The vibration and structure-borne noise of the SCC box girder are calculated in the frequency domain. Then, the effectiveness of the method and model is verified through the comparison of the field experimental results. Finally, the effect of the ground reflection in the SEA model is considered using the sound ray-tracing method for the first time.

1 January 2021 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
ZCZenong Cheng
Zenong Cheng
Nan ZhangNan Zhang
Nan Zhang
Qikai SunQikai Sun
Qikai Sun
ZSZeguo Shen
Zeguo Shen
Xiao LiuXiao Liu
Xiao Liu
A modified moving loads’ model is proposed for the vehicle‐bridge coupling vibration simulation. Taking the vehicle‐bridge interaction model (VBI) as the reference, the accuracy and applicability of the three calculation models, namely, moving loads’ model, moving mass model, and spring‐damper‐mass model, are compared using the frequently‐used railway simply‐supported beam with a span of 32 meters as the research object. Influencing factors such as vehicle speed, mass ratio of vehicle and beam, and primary spring stiffness on the dynamic response of the vehicle‐bridge system are discussed in detail. The results show that the moving load model has the best performance on the stability of the deviation rate, but its calculation results are smaller than the other two methods as well as the VBI. The values of the deviation rate for the moving mass model and the spring‐damper‐mass model are large, and the stability of those are insufficient in the range of 80%∼120% of the first resonance velocity. Except for that, the results of the two models are in good agreement with the VBI model. According to above analysis, a modified moving loads’ model with two amplification coefficients, namely, 1.10 for the range of 90%∼105% of the first resonance velocity and 1.05 for other velocities, are proposed, which has higher calculation efficiency and accuracy.

8 February 2023 in International Journal of Structural Stability and Dynamics
Verified
Journal Article
Closed access
PDF file
Xiao LiuXiao Liu
Xiao Liu
Nan ZhangNan Zhang
Nan Zhang
QSQikai Sun
Qikai Sun
ZCZenong Cheng
Zenong Cheng


7 March 2022 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
Xiao LiuXiao Liu
Xiao Liu
Nan ZhangNan Zhang
Nan Zhang
Qikai SunQikai Sun
Qikai Sun
KWKunpeng Wang
Kunpeng Wang
ZWzhaozhi wu
zhaozhi wu
In this study, the vibration acceleration and radiation structure noise in specific points, 30 cm away from the center surface of each plate of the concrete deck, web, and flange of the steel beam, are measured via the hammering test. The test is conducted on the middle concrete deck of an 8.5 m steel-concrete composite slab beam. The accuracy of the numerical model is then carefully justified. The influence of the number of shear studs, spacing, and arrangement of ribs on the concerning results is methodically examined and discussed by employing the numerical model. In the center frequency of 10–1000 Hz, the total sound power level of the structure can be lessened by improving the concrete deck thickness as well as the number of shear studs. The reduction of the rib spacing can effectively lessen the sound power level as well. The noise reduction of the plate with rib arrangement in the midspan zone is more influential than the case with uniform layout in the whole span.