Unmanned logistics vehicle (ULV) realize the automation and intelligence of cargo transportation, which improves the efficiency, cost-effectiveness and safety of logistics and distribution, while the trajectory tracking control of ULV is the key technology to ensure their safe and efficient delivery of goods. In order to solve the trajectory tracking problem of ULV in the process of delivering goods, this paper proposes a model predictive control (MPC) method based on event-triggered and fuzzy adaptive optimization parameters. Firstly, the dynamics model of the ULV is established. Secondly, an event-triggered mechanism is introduced to establish ET-MPC, while a disturbance observer is designed considering the external disturbance and the controller calculation discarding the nonlinear term. Thirdly, the advantages of fuzzy control and MPC algorithms are integrated, and the four important parameters in the MPC controller are adaptively optimized by fuzzy control, and the improved MPC control strategy is designed. Finally, the CarSim-Matlab/Simulink co-simulation platform and the experimental vehicle platform are constructed to verify the effectiveness of the improved MPC trajectory tracking controller proposed in this paper. The results show that the improved MPC control strategy can reduce the computation time of the controller, and the total number of triggering times of the controller is reduced by 46.44% compared with the classical MPC, which reduces the computational complexity of the controller and improves the accuracy and smoothness of the trajectory tracking of the ULV.
Trackside acoustic signals are useful for non-contact measurements as well as early warnings in the diagnosis of train wheelset bearing faults. However, there are two important problems when using roadside acoustic signals to diagnose wheel-to-wheel bearing faults; one is the presence of strong interference from strong noise and high harmonics in the signal, and the other is the low efficiency of bearing fault identification caused by it. Therefore, from the viewpoint of solving the two problems, a sparse operation method is proposed for denoising and detuning the modulation of the roadside acoustic signal, and a machine learning classifier with a Genetic Algorithm (GA)-optimized Radial Basis Neural Network (RBFNN) is proposed to improve the rate at which the features of roadside acoustic signal faults are recognized. Firstly, the background noise is filtered out from the Doppler-corrected acoustic signal using the Sparse Representation method, and the inverse wavelet transform is reconstructed into a noiseless signal. Secondly, the interference high-harmonic signal in the signal is filtered out using the Resonant Sparse Signal Decomposition (RSSD) method. Then, the GA is selected to optimize the parameters of the RBF neural network and build a fault diagnosis model. Finally, the extracted acoustic signal feature set is trained on the network model, and the trained model is used for testing. In summary, the sparse operation on the roadside acoustic signal processing and the GA-RBFNN diagnosis model were verified as being very effective in the diagnosis of roadside acoustic train wheel pair faults through the simulation experiment.
In light of the issue that the vibration signal from an axle-box bearing collected during the operation of an electric multiple unit (EMU) is seriously polluted by background noise, which leads to difficulty in identifying fault characteristic frequency, this paper proposes a resonance-based sparse signal decomposition (RSSD) and variational mode decomposition (VMD) method based on sparrow search algorithm (SSA) optimization to extract the fault characteristic frequency of the bearing. Firstly, the RSSD method is utilized to decompose the signal based on the obtained optimal combination of quality factors, resulting in the optimal low-resonance component with periodic fault information. Then, the VMD method is performed on this low-resonance component. The parameter combinations for both methods are optimized utilizing the SSA method. Subsequently, envelope demodulation is applied to the intrinsic mode function (IMF) with maximum kurtosis, and fault diagnosis is achieved by comparing it with the theoretical fault characteristic frequency. Finally, experimental validation and comparison are conducted by utilizing simulated signals and example signals. The results demonstrate that the proposed method extracts more obvious periodic fault impact components. It effectively filters out the interference of complex noise and reduces the blindness of setting weights on parameters due to human experience, indicating excellent adaptability and robustness.
Aiming at several problems in the practical application of axle-box bearing fault diagnosis for electric multiple unit, a fault diagnosis method based on a transfer learning (TL) network with a feedback control input strategy is proposed. First, given the unavailability of large amounts of labeled data, the proposed method employs a TL network as its central framework, incorporating a lightweight architecture. Maximum mean discrepancy and classification loss are also introduced to align the extracted features, allowing the method to perform fault diagnosis across various bearings under different operating conditions. Then, considering the various perturbations in the vibration data, an adaptive input strategy combining signal processing methods is proposed to screen out important information through denoising and deharmonizing, thereby enhancing input data quality. Furthermore, a feedback control input strategy is proposed to reduce redundant health information input, inspired by feedback control principles. Finally, a fault identification strategy is implemented to recognize fault types in unknown signals. The accuracy and practicality of the proposed method are validated through experiments on three datasets and random fault vibration signals.