In light of the issue that the vibration signal from an axle-box bearing collected during the operation of an electric multiple unit (EMU) is seriously polluted by background noise, which leads to difficulty in identifying fault characteristic frequency, this paper proposes a resonance-based sparse signal decomposition (RSSD) and variational mode decomposition (VMD) method based on sparrow search algorithm (SSA) optimization to extract the fault characteristic frequency of the bearing. Firstly, the RSSD method is utilized to decompose the signal based on the obtained optimal combination of quality factors, resulting in the optimal low-resonance component with periodic fault information. Then, the VMD method is performed on this low-resonance component. The parameter combinations for both methods are optimized utilizing the SSA method. Subsequently, envelope demodulation is applied to the intrinsic mode function (IMF) with maximum kurtosis, and fault diagnosis is achieved by comparing it with the theoretical fault characteristic frequency. Finally, experimental validation and comparison are conducted by utilizing simulated signals and example signals. The results demonstrate that the proposed method extracts more obvious periodic fault impact components. It effectively filters out the interference of complex noise and reduces the blindness of setting weights on parameters due to human experience, indicating excellent adaptability and robustness.
26 August 2025 in The Canadian Journal of Chemical Engineering
Shunting operation plan is the main daily work of the freight train depot, the optimization of shunting operation plan is of great significance to improve the efficiency of railway operation and production and transportation. In this paper, the deep reinforcement learning (DRL) environment and model of shunting operation problem are constructed by three elements: action, state and reward, taking shunting locomotive as the agent, the lane number of the fall-down train group as the action, the fall-down conditions of the train group as the state, and design the reward function based on the total number of shunting hooks generated after the group’s descent and reorganization. The model is solved using the Deep Q network (DQN) algorithm with the objective of minimizing the number of shunting hooks, the optimal shunting operation plan can be solved after sufficient training. DQN is verified to be effective through example simulations: Compared to the overall planning and coordinating (OPC) method, DQN produces a shunting operation plan that occupies fewer lanes and produces 10% fewer total shunting hooks. Compared to the binary search tree (BST) algorithm, DQN produces 5% fewer total shunting hooks. Compared with the branch and bound (B&B) algorithm, DQN takes less time to solve, and the number of freight train removed by the coupling and slipping operations is reduced by 5.3% and 2.9%, respectively, and the quality of the shunting operation plan is better. Therefore, this paper provides a new solution for the intelligentization of shunting operations in large freight train depot.