Unmanned logistics vehicle (ULV) realize the automation and intelligence of cargo transportation, which improves the efficiency, cost-effectiveness and safety of logistics and distribution, while the trajectory tracking control of ULV is the key technology to ensure their safe and efficient delivery of goods. In order to solve the trajectory tracking problem of ULV in the process of delivering goods, this paper proposes a model predictive control (MPC) method based on event-triggered and fuzzy adaptive optimization parameters. Firstly, the dynamics model of the ULV is established. Secondly, an event-triggered mechanism is introduced to establish ET-MPC, while a disturbance observer is designed considering the external disturbance and the controller calculation discarding the nonlinear term. Thirdly, the advantages of fuzzy control and MPC algorithms are integrated, and the four important parameters in the MPC controller are adaptively optimized by fuzzy control, and the improved MPC control strategy is designed. Finally, the CarSim-Matlab/Simulink co-simulation platform and the experimental vehicle platform are constructed to verify the effectiveness of the improved MPC trajectory tracking controller proposed in this paper. The results show that the improved MPC control strategy can reduce the computation time of the controller, and the total number of triggering times of the controller is reduced by 46.44% compared with the classical MPC, which reduces the computational complexity of the controller and improves the accuracy and smoothness of the trajectory tracking of the ULV.
In light of the issue that the vibration signal from an axle-box bearing collected during the operation of an electric multiple unit (EMU) is seriously polluted by background noise, which leads to difficulty in identifying fault characteristic frequency, this paper proposes a resonance-based sparse signal decomposition (RSSD) and variational mode decomposition (VMD) method based on sparrow search algorithm (SSA) optimization to extract the fault characteristic frequency of the bearing. Firstly, the RSSD method is utilized to decompose the signal based on the obtained optimal combination of quality factors, resulting in the optimal low-resonance component with periodic fault information. Then, the VMD method is performed on this low-resonance component. The parameter combinations for both methods are optimized utilizing the SSA method. Subsequently, envelope demodulation is applied to the intrinsic mode function (IMF) with maximum kurtosis, and fault diagnosis is achieved by comparing it with the theoretical fault characteristic frequency. Finally, experimental validation and comparison are conducted by utilizing simulated signals and example signals. The results demonstrate that the proposed method extracts more obvious periodic fault impact components. It effectively filters out the interference of complex noise and reduces the blindness of setting weights on parameters due to human experience, indicating excellent adaptability and robustness.
Aiming at several problems in the practical application of axle-box bearing fault diagnosis for electric multiple unit, a fault diagnosis method based on a transfer learning (TL) network with a feedback control input strategy is proposed. First, given the unavailability of large amounts of labeled data, the proposed method employs a TL network as its central framework, incorporating a lightweight architecture. Maximum mean discrepancy and classification loss are also introduced to align the extracted features, allowing the method to perform fault diagnosis across various bearings under different operating conditions. Then, considering the various perturbations in the vibration data, an adaptive input strategy combining signal processing methods is proposed to screen out important information through denoising and deharmonizing, thereby enhancing input data quality. Furthermore, a feedback control input strategy is proposed to reduce redundant health information input, inspired by feedback control principles. Finally, a fault identification strategy is implemented to recognize fault types in unknown signals. The accuracy and practicality of the proposed method are validated through experiments on three datasets and random fault vibration signals.
The operating environment of the port AGV is outdoors in the coastal area. There are complex and changeable environmental impacts such as rainfall, wind erosion, and salt erosion, which cause more disturbances to the port AGV. Aiming at the problem of the influence of environmental disturbance on trajectory tracking accuracy during the operation of port AGV, this paper proposes a control method based on fuzzy control theory and sliding mode variable structure control theory. Firstly, a two-degree-of-freedom dynamic model of AGV in port environment is established on the premise of accurately describing the dynamic characteristics of the vehicle and reducing the requirements for hardware and software. Secondly, for the tire model, the tire model formula constructed by the magic formula proposed by Pacejka with high fitting accuracy and simple modeling is used to establish the tire model. Thirdly, aiming at the chattering problem in sliding mode control, sliding mode variable structure control is designed, and fuzzy controller is added to control the change of switching gain coefficient. Finally, for the actual operating environment of the port, the Gaussian disturbance is used to simulate the external disturbance, and the controller model designed in various ways is built and simulated by Matlab / Simulink software. The experimental results show that the proposed algorithm is superior to the control group in response speed, anti-interference ability and reducing chattering. Compared with the traditional control method, the steady-state time of the position tracking method is increased by 73.41 %, and the error generated in the disturbance stage is 1.8 % of the initial error. The speed tracking enters the Gaussian disturbance stage after the steady state, and the error is less than 1 % of the initial error, which achieves the purpose of reducing chattering, realizes the optimization of the traditional sliding mode variable structure control, and verifies the feasibility of the algorithm in the future practical application.