Bingtian Guo

Mr. Bingtian Guo

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2023 in Optica
Verified
Journal Article
Closed access
SLSeunghyun Lee
Seunghyun Lee
XJXiao Jin
Xiao Jin
HJHyemin Jung
Hyemin Jung
HLHarry Lewis
Harry Lewis
YLYifan Liu
Yifan Liu
SKSanjay Krishna
Sanjay Krishna
High sensitivity avalanche photodiodes (APDs) operating at eye-safe infrared wavelengths (1400–1650 nm) are essential components in many communications and sensing systems. We report the demonstration of a room temperature, ultrahigh gain ( M = 278 , λ = 1550 n m , V = 69.5 V , T = 296 K ) linear mode APD on an InP substrate using a G a A s 0.5 S b 0.5 / A l 0.85 G a 0.15 A s 0.56 S b 0.44 separate absorption, charge, and multiplication (SACM) heterostructure. This represents ∼ 10 × gain improvement ( M = 278 ) over commercial, state-of-the-art InGaAs/InP-based APDs ( M ∼ 30 ) operating at 1550 nm. The excess noise factor is extremely low ( F < 3 ) at M = 70 , which is even lower than Si APDs. This design gives a quantum efficiency of 5935.3% at maximum gain. This SACM APD also shows an extremely low temperature breakdown sensitivity ( C b d ) of ∼ 11.83 m V / K , which is ∼ 10 × lower than equivalent InGaAs/InP commercial APDs. These major improvements in APD performance are likely to lead to their wide adoption in many photon-starved applications.

1 November 2023 in APL Photonics
Verified
Journal Article
Open access
PDF file
BGBingtian Guo
Bingtian Guo
MSMariah Schwartz
Mariah Schwartz
SKSri H. Kodati
Sri H. Kodati
KMKyle M. McNicholas
Kyle M. McNicholas
HJHyemin Jung
Hyemin Jung
SKSanjay Krishna
Sanjay Krishna
High-sensitivity avalanche photodiodes (APDs) are used to amplify weak optical signals in a wide range of applications, including telecommunications, data centers, spectroscopy, imaging, light detection and ranging, medical diagnostics, and quantum applications. This paper reports antimony-based separate absorption, charge, and multiplication structure APDs on InP substrates. Al0.7In0.3As0.79Sb0.21 is used for the multiplier region, and InGaAs is used as the absorber. The excess noise is comparable to that of silicon APDs; the k-value is more than one order of magnitude lower than that of APDs that use InP or InAlAs for the gain region. The external quantum efficiency without an anti-reflection coating at 1550 nm is 57%. The gradient of the temperature coefficient of avalanche breakdown voltage is 6.7 mV/K/μm, which is less than one-sixth that of InP APDs, presenting the potential to reduce the cost and complexity of receiver circuits. Semi-insulating InP substrates make high-speed operation practical for widely reported AlxIn1−xAsySb1−y-based APDs.

22 April 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
BGBingtian Guo
Bingtian Guo
XJXiao Jin
Xiao Jin
SLSeunghyun Lee
Seunghyun Lee
SASheikh Z. Ahmed
Sheikh Z. Ahmed
LILaser Thermal Analysis Inc.
Laser Thermal Analysis Inc.
JCJoe C. Campbell
Joe C. Campbell
Digital alloy and random alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 avalanche photodiodes (APDs) exhibit low excess noise, comparable to Si APDs. Consequently, this material is a promising multiplication layer candidate for separate absorption, charge, and multiplication structure APDs with high gain-bandwidth product. Characterization of the impact ionization coefficients of electrons ( α ) and holes ( β ) plays an important role in the simulation of avalanche photodiodes. The multiplication gain curves of eight p + -i-n + and n + -i-p + APDs covering a wide range of avalanche widths have been used to determine the electric field dependence of the impact ionization coefficients of Al 0.85 Ga 0.15 As 0.56 Sb 0.44 . A large impact ionization coefficient ratio between that of electrons to holes was seen across a wide electric field range. Simulations of the avalanche multiplication in these structures using a random path length (RPL) model gave good agreement with experimental results over almost three orders of magnitude, and a mixed injection method was employed to verify the extracted impact ionization coefficients. Interestingly, no difference in the impact ionization coefficients was seen between digital alloy and random alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 . This knowledge of impact ionization coefficients is beneficial for the future utilization of the Al x Ga 1-x As y Sb 1-y material system.

22 June 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
BGBingtian Guo
Bingtian Guo
SASheikh Z. Ahmed
Sheikh Z. Ahmed
XXXingjun Xue
Xingjun Xue
ARAnn-Kathryn Rockwell
Ann-Kathryn Rockwell
JHJaedu Ha
Jaedu Ha
JCJoe C. Campbell
Joe C. Campbell
Digital alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , random alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , and random alloy Al 0.79 In 0.21 As 0.74 Sb 0.26 are promising candidates for the multiplication regions of avalanche photodiodes (APDs) due to their low excess noise, which is comparable to that of Si APDs. The temperature dependence of avalanche breakdown in these materials has been investigated by measuring the multiplication gain. A weak temperature dependence of the breakdown voltage is observed, which is desirable to reduce the complexity of temperature or reverse bias control circuits in the optical receiver. Calculations of the alloy disorder potentials and alloy scattering rates indicate that the temperature dependence of the avalanche breakdown in these quaternary alloys is attributable to the dominance of large mass variations and high alloy scattering over phonon scattering. Impact ionization can also be impacted by the temperature dependence of the bandgap energy which affects the ionization threshold energy. Therefore, the temperature dependence of the bandgap energy has been investigated by temperature-dependent photoluminescence and external quantum efficiency measurements to further explain the temperature dependent breakdown characteristics of these materials.

25 September 2023 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
TRT. J. Ronningen
T. J. Ronningen
SKS. H. Kodati
S. H. Kodati
XJX. Jin
X. Jin
SLS. Lee
S. Lee
HJH. Jung
H. Jung
SKSanjay Krishna
Sanjay Krishna
For short-wavelength infrared (SWIR) avalanche photodiodes, a separate absorption, charge, and multiplication design is widely used. AlInAsSb on an InP substrate is a potential multiplication layer with a lattice match to absorber candidates across the SWIR. Our new measurements demonstrate that AlInAsSb on InP is a promising multiplier candidate with a relatively low dark current density of 10−4 A/cm2 at a gain of 30; a high gain, measured up to 245 in this study; and a large differentiation of electron and hole ionization leading to a low excess noise, measured to be 2.5 at a gain of 30. These characteristics are all improvements over commercially available SWIR detectors incorporating InAlAs or InP as the multiplier. We measured and analyzed gain for multiple wavelengths to extract the ionization coefficients as a function of an electric field over the range 0.33–0.6 MV/cm.

24 March 2022 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
SKSanjay Krishna
Sanjay Krishna
SLSeunghyun Lee
Seunghyun Lee
SKSri Harsha Kodati
Sri Harsha Kodati
MSMariah Schwartz
Mariah Schwartz
HJHyemin Jung
Hyemin Jung
CGChristoph H. Grein
Christoph H. Grein
We provide an overview of our progress on the development of linear mode avalanche photodiodes (LmAPDs) on InP substrates using antimony (Sb)-based multipliers for short-wavelength infrared (SWIR) spectral region. We identify the key figures of merit of LmAPDs to provide higher sensitivity and speed for applications like light detection and ranging (LiDAR) and remote sensing. We discuss the design of separate absorption, charge, and multiplication (SACM) APDs that are used for narrow gap absorption. We summarize our results on the impact ionization, multiplication gain, dark current, and excess noise of AlGaAsSb and AlInAsSb multipliers lattice-matched to InP substrates. Finally, we identify the key technical challenges associated with the development of SACM APDs on InP substrates.